EF Logo

J1939 · Aftertreatment - SCR/DEF

SPN 3226 FMI 20

Outlet NOx sensor drifted high

What does SPN 3226 FMI 20 mean?

The outlet NOx sensor is drifting high compared with what it should read. The ECM thinks the SCR is not working and may set an inducement derate. Urgency: check soon - the machine may derate or limit a function. Check first: compare the outlet NOx with the intake NOx under load in the service tool; the outlet should be far lower with good DEF.

FaultCheckSPN 3226FMI 20J1939 engine ECU
FMI 20
Data drifted high

Can I keep running with it?

Check soon

The machine may derate or limit a function. Find the cause before the next shift.

What should I check first?

Compare the outlet NOx with the intake NOx under load in the service tool; the outlet should be far lower with good DEF

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Checks

0 of 5 done

Causes

  • Outlet NOx sensor aged or contaminated, so its reading creeps high with no matching change in NOx
  • Exhaust leak upstream of the sensor adding air that the sensor reads as NOx
  • SCR catalyst failing, so the high NOx is real
  • DEF dosing too low from a partly blocked dosing valve

How it failed

You'll notice: The outlet NOx reading has drifted high compared with the expected value, so the ECM thinks the SCR is not cutting NOx and may set an inducement derate and speed limit.

Erratic or implausibleRead from FMI 20: data drifted high

The reading jumps, drifts or disagrees with the sensors around it.

allowed rangetime
The reading against the band the controller allows.
Meter test
Watch the live value on the service tool while you flex the harness and tap the connector.
Good result
A steady value that tracks the real condition. A jump while flexing is the loose pin or wire.

When to stop

Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Source

Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)

This list shows SPN 3226 with FMI 20. The guidance on this page is general, not taken from it.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.