EF Logo

J1939 · Aftertreatment - SCR/DEF

SPN 3226 FMI 2

Outlet NOx sensor erratic

What does SPN 3226 FMI 2 mean?

The outlet NOx sensor signal is erratic or incorrect. The ECM cannot judge SCR performance with a bouncing reading and may derate. Urgency: check soon - the machine may derate or limit a function. Check first: wiggle the downstream plug and lead while watching the NOx value for a jump.

FaultCheckSPN 3226FMI 2J1939 engine ECU
FMI 2
Erratic or incorrect data

Can I keep running with it?

Check soon

The machine may derate or limit a function. Find the cause before the next shift.

What should I check first?

Wiggle the downstream plug and lead while watching the NOx value for a jump

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Checks

0 of 5 done

Causes

  • Downstream sensor plug near the tailpipe letting in road spray and breaking contact
  • Downstream sensor element failing and giving a wandering output
  • Sensor lead chafed against the tailpipe hanger or silencer and shorting intermittently
  • Exhaust leak at the sensor boss disturbing the sample

How it failed

You'll notice: The downstream NOx sensor signal is erratic or incorrect, so the ECM cannot judge SCR performance and may derate.

Erratic or implausibleRead from FMI 2: erratic or incorrect data

The reading jumps, drifts or disagrees with the sensors around it.

allowed rangetime
The reading against the band the controller allows.
Meter test
Watch the live value on the service tool while you flex the harness and tap the connector.
Good result
A steady value that tracks the real condition. A jump while flexing is the loose pin or wire.

When to stop

Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Source

Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)

This list shows SPN 3226 with FMI 2. The guidance on this page is general, not taken from it.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.