J1939 · Lubrication
SPN 100 FMI 18
Oil pressure low, moderately severe
What does SPN 100 FMI 18 mean?
Oil pressure is below its limit at the moderately severe level. The engine keeps running but the lamp and derate warn that oil pressure is falling. Urgency: stop now - shut down and fix before working on. Check first: check the oil level and grade against the maker's chart.
- SPN 100
- Engine oil pressure
- FMI 18
- Below normal, moderately severe
Can I keep running with it?
Stop now
Shut down and fix before working on. Running on risks damage or the machine locks out.
What should I check first?
Check the oil level and grade against the maker's chart
Then 4 more checksWhere to read it
Connect a J1939-capable scan tool to the 9-pin diagnostic port.
Checks
0 of 5 done
Causes
- Oil level low or the wrong oil grade for the temperature
- Oil filter plugged or its bypass valve stuck
- Oil pump or bearings starting to wear
- Oil cooler restricted
How it failed
You'll notice: Oil pressure is below its limit at the moderately severe level.
Real conditionRead from FMI 18: below normal, moderately severe
The sensor reading is valid but outside the allowed range - the problem may be real.
- Meter test
- Check the real value with a separate gauge or thermometer before blaming the sensor.
- Good result
- If the gauge agrees with the display, fix the machine, not the sensor.
When to stop
Tilt, load and interlock cutouts are what keep a lift or telehandler from tipping. Never bypass or bridge one to keep working; get the fault found before anyone goes up or lifts again.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Other SPN 100 codes
Source
Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)
This list shows SPN 100 with FMI 18. The guidance on this page is general, not taken from it.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
