EF Logo

Detroit · Aftertreatment

Detroit Fault Code SPN 3246 FMI 0

Diesel Particulate Filter Outlet Temperature - Very High

What does Detroit code SPN 3246 FMI 0 mean?

The ACM measured the DPF outlet temperature very high. This protects the filter and the catalyst from overheating, so it can cause an immediate derate. Urgency: stop now - shut down and fix before working on. Check first: look for exhaust smoke, hot spots and signs of overheating around the DPF housing.

FaultStopSPN 3246FMI 0Detroit · Aftertreatment

Can I keep running with it?

Stop now

Shut down and fix before working on. Running on risks damage or the machine locks out.

What should I check first?

Look for exhaust smoke, hot spots and signs of overheating around the DPF housing.

Then 3 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a Detroit-capable diagnostic tool (Diagnostic Link or a compatible scan tool) to the vehicle diagnostic socket.

Checks

0 of 4 done

Causes

  • Uncontrolled regeneration or a fuel leak into the exhaust
  • Failed doser leaking fuel
  • Soot-loaded filter burning too hot
  • Temperature sensor reading too high

How it failed

You'll notice: A high exhaust temperature lamp, a derate and a possible regeneration abort.

Real conditionRead from FMI 0: data above normal, most severe

The sensor reading is valid but outside the allowed range - the problem may be real.

allowed rangetime
The reading against the band the controller allows.
Meter test
Check the real value with a separate gauge or thermometer before blaming the sensor.
Good result
If the gauge agrees with the display, fix the machine, not the sensor.

When to stop

Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Same part, other failures: DOC and DPF temperature sensors

9 other codes on this part are also real condition (SPN 3242 FMI 17, SPN 3242 FMI 18, SPN 3246 FMI 15, SPN 3250 FMI 0 and more). When they show together, start at the wiring and connector they share.

Show the other 18 codes
All 27 DOC and DPF temperature sensors codes on one page

Source

Detroit Diesel DD15 Gen 5 (2023) Fault Codes List, Diesel Repair (SPN/FMI with Detroit descriptions)

This source lists SPN 3246 FMI 0 and its meaning. The guidance on this page is general, not taken from it.

The source covers: Detroit DD13, DD15, DD16 (GHG14/GHG17, Gen 5) with MCM, ACM and CPC5.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.