Cummins · Aftertreatment - SPN 3362 FMI 31
Cummins Fault Code 1682
DEF dosing unit input lines - condition exists
What does Cummins code 1682 mean?
The ECM sees a problem with the DEF supply or return lines going to the dosing unit, such as a leak, a blockage or a swapped line. The DEF cannot be dosed in the correct quantity. Urgency: check soon - the machine may derate or limit a function. Check first: look over all DEF lines for leaks, crystals and kinks from the tank to the dosing unit.
Can I keep running with it?
Check soon
The machine may derate or limit a function. Find the cause before the next shift.
What should I check first?
Look over all DEF lines for leaks, crystals and kinks from the tank to the dosing unit
Then 4 more checksWhere to read it
Connect INSITE or another J1939-capable scan tool to the 9-pin diagnostic port.
Checks
0 of 5 done
Causes
- DEF supply or return line kinked, plugged or swapped at the dosing unit
- DEF line leaking or frozen
- DEF pump or filter plugged with crystals
- Wrong line connector fitted after service work
How it failed
You'll notice: A DEF or SCR warning and possibly a power derate.
OtherRead from how the source describes the code
The source does not say how this one failed.
- Meter test
- Read the code with the service tool and note which other codes are active with it.
- Good result
- Codes that appear together usually share one cause - start with the wiring they share.
When to stop
Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Same part, other failures: DEF dosing unit, valves and heater
- 1681DEF dosing unit - bad device or componentPart or controllerCheck soon
- 1682DEF dosing unit input lines - condition existsOtherCheck soon
- 2976DEF dosing unit temperature - data erratic or incorrectErratic or implausibleCheck soon
- 3558DEF dosing unit - circuit voltage highShorted highCheck soon
- 3559DEF dosing unit - voltage low (shorted to a low source)Shorted lowCheck soon
- 3561DEF dosing unit - current low or open circuitOpen circuitCheck soon
- 3565DEF dosing valve circuit - voltage highShorted highCheck soon
- 3566DEF dosing valve - voltage low (shorted to a low source)Shorted lowCheck soon
- 3567DEF dosing valve circuit open circuitOpen circuitCheck soon
Show the other 21 codesHide the other codes
- 3568DEF dosing valve - mechanical failureReal conditionCheck soon
- 3569DEF dosing unit input lines - mechanical fault or not respondingPart or controllerCheck soon
- 3577DEF return valve - voltage high (shorted to a high source)Shorted highCheck soon
- 3578DEF return valve circuit shorted low or driver voltage lowShorted lowCheck soon
- 3579DEF return valve - current low or open circuitOpen circuitCheck soon
- 3612DEF dosing unit - mechanical fault or not respondingPart or controllerCheck soon
- 3679DEF dosing unit - root cause not knownOtherInformation
- 3755DEF dosing valve - data erratic or incorrectErratic or implausibleCheck soon
- 4155DEF dosing unit heater relay - voltage high (shorted to a high source)Shorted highCheck soon
- 4156DEF dosing unit heater relay - voltage low (shorted to a low source)Shorted lowCheck soon
- 4157DEF return valve - mechanical fault or not respondingPart or controllerCheck soon
- 4167DEF dosing unit heater - data erratic or incorrectErratic or implausibleCheck soon
- 4168DEF dosing unit heater - voltage high (shorted to a high source)Shorted highCheck soon
- 4169DEF dosing unit heater - voltage low (shorted to a low source)Shorted lowCheck soon
- 4171DEF dosing unit heater - below normal - moderately severeReal conditionCheck soon
- 4245DEF dosing unit heater temperature - data erratic or incorrectErratic or implausibleCheck soon
- 4251DEF dosing unit heater temperature - abnormal rate of changeErratic or implausibleCheck soon
- 4658SCR actual dosing reagent quantity - below normal - moderately severeReal conditionCheck soon
- 5866DEF dosing unit relay feedback - voltage high (shorted to a high source)Shorted highCheck soon
- 5867DEF dosing unit relay feedback - voltage low (shorted to a low source)Shorted lowCheck soon
- 6486DEF actual dosing quantity - above normal - moderately severeReal conditionCheck soon
Other Cummins codes: Aftertreatment - SPN 3362 FMI 31
Related on Equipments Finder
Source
Cummins ISX15 (2013-2018) Fault Codes List (Diesel Repair)
This source lists 1682 and its meaning. The guidance on this page is general, not taken from it.
The source covers: Cummins ISX15/X15/ISB6.7/B6.7/L9 engines (J1939 SPN 3362, FMI 31); same code list used in trucks, buses and machines with these engines.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
