EF Logo

Cat · Power supply

Cat Fault Code CID 168 FMI 02

Electrical system voltage erratic

What does Cat code CID 168 FMI 02 mean?

System voltage is jumping or reading incorrectly. The manual blames dirty or loose connections, the engine wiring harness or the fuse module 2 cable, so treat it as an intermittent supply problem. Urgency: check soon - the machine may derate or limit a function. Check first: wiggle-test the battery cables and ground straps while watching battery voltage on Cat ET.

FaultCheckCID 168FMI 02Cat · Power supply
CID 168
Which component is at fault
FMI 02
Erratic or incorrect data

Can I keep running with it?

Check soon

The machine may derate or limit a function. Find the cause before the next shift.

What should I check first?

Wiggle-test the battery cables and ground straps while watching battery voltage on Cat ET.

Then 4 more checks
Code shows hereFAULTCID 168FMI 02

Where this code shows

Turn the key on and check the cluster or monitor for a warning lamp.

Checks

0 of 5 done

Causes

  • Dirty or corroded connections in the supply path
  • Faulty engine wiring harness
  • Fuse module 2 cable with a loose terminal

How it failed

You'll notice: The machine may cut out or the monitor may restart now and then, usually over bumps or when the harness moves, with no fixed pattern.

Erratic or implausibleRead from FMI 2: erratic or incorrect data

The reading jumps, drifts or disagrees with the sensors around it.

allowed rangetime
The reading against the band the controller allows.
Meter test
Watch the live value on the service tool while you flex the harness and tap the connector.
Good result
A steady value that tracks the real condition. A jump while flexing is the loose pin or wire.

When to stop

Most sensor and wiring faults can be traced with a multimeter and the wiring diagram. Disconnect the battery before unplugging controllers; if the controller itself is suspect or needs programming, that needs the dealer’s service tool.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Same part, other failures: System voltage, key switch and starting

Source

TM 5-3805-298-23-1 Field Maintenance Manual, 924H Wheel Loader, troubleshooting tables (CID 168 FMI 02)

This source lists CID 168 FMI 02 and its meaning. The guidance on this page is general, not taken from it.

The source covers: Cat 924H wheel loader with C6.6 engine (engine ECM), per the 924H field maintenance manual; the same CID-FMI scheme is used on other Cat machines with C-series ECMs.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.