Bobcat · Filters
Bobcat Fault Code M0217
Hydraulic/hydrostatic filter plugged
What does Bobcat code M0217 mean?
The switch on the hydraulic filter shows a blocked or heavily loaded filter. Cold, thick oil can also trigger it briefly. Urgency: check soon - the machine may derate or limit a function. Check first: inspect the filter head bypass valve for debris that holds it open or shut.
Can I keep running with it?
Check soon
The machine may derate or limit a function. Find the cause before the next shift.
What should I check first?
Inspect the filter head bypass valve for debris that holds it open or shut
Then 3 more checksWhere this code shows
On touchscreen R-series machines, touch the screen and pick Service Codes from the menu.
Checks
0 of 4 done
Causes
- Cold oil too thick to flow through
- Damaged filter bypass
- Switch fault giving a false closure
- Dirty or degraded hydraulic oil
How it failed
You'll notice: The hydraulic filter restriction warning is on.
Lost messageRead from how the source describes the code
A module stopped hearing another on the data link, or the data came late or garbled.
- Meter test
- Key off. Measure resistance between CAN high and CAN low at the diagnostic connector.
- Good result
- About 60 Ω on a two-terminator J1939 link. About 120 Ω means one terminator or one leg is open.
When to stop
Lower attachments to the ground and relieve hydraulic pressure before loosening any fitting. Never feel for a leak with your hand - oil under pressure can inject through skin.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Same part, other failures: Air, hydraulic and fuel filters
8 other codes on this part are also lost message (02-17, 10-17, M1017, P1062-00 and more). When they show together, start at the wiring and connector they share.
- M0117Air filter pluggedReal conditionCheck soon
- M0144Air filter derate level 1Real conditionCheck soon
- M0145Air filter derate level 2Real conditionCheck soon
- M0216Hydraulic/hydrostatic filter not connectedOpen circuitCheck soon
- M0217Hydraulic/hydrostatic filter pluggedLost messageCheck soon
- M1016Hydraulic charge filter not connectedOpen circuitCheck soon
- M1017Hydraulic charge filter pluggedLost messageCheck soon
- P1060-16Air filter out of range lowOtherCheck soon
- P1060-17Air filter out of range highOtherCheck soon
Show the other 16 codesHide the other codes
- 01-16Air filter not connectedOpen circuitCheck soon
- 01-17Air filter pluggedReal conditionCheck soon
- 02-16Hydraulic charge filter not connectedOpen circuitCheck soon
- 02-17Hydraulic charge filter pluggedLost messageCheck soon
- 10-16Hydraulic implement filter not connectedOpen circuitCheck soon
- 10-17Hydraulic implement filter pluggedLost messageCheck soon
- M0116Air filter switch not connectedOpen circuitCheck soon
- P1062-00Air filter pluggedLost messageCheck soon
- P1063-00Air filter pluggedLost messageCheck soon
- C1093-00Hydraulic case drain filter switch pluggedLost messageCheck soon
- M9111Fuel filter extremely pluggedLost messageCheck soon
- M9117Fuel filter pluggedLost messageCheck soon
- H9144Fuel filter derate level 1Real conditionCheck soon
- M9144Fuel filter derate level 1Real conditionCheck soon
- H9145Fuel filter derate level 2Real conditionCheck soon
- M9145Fuel filter derate level 2Real conditionCheck soon
Related on Equipments Finder
Source
Bobcat Service Code List (rev. 10-20, M-Series/R-Series loaders and M-Series excavators)
This source lists M0217 and its meaning. The guidance on this page is general, not taken from it.
The source covers: M-Series loaders (S450-S850, T450-T870) and M-Series excavators (E26-E85).
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
