EF Logo

dozermade by ShantuiUAE, Global

Shantui SD16Specs, weight and dimensions

Weight
17 t
17,000 kg
Horsepower
160 hp
120 kW
Blade width
3.455 m
11.3 ft

Quick answer

The Shantui SD16 is a 17-tonne dozer with a Weichai WD10G178E25 engine rated at 120 kW (160 hp). Its blade width is 3.455 m. It suits bulk earthmoving and pushing, spreading and levelling fill and road and pad building. Its rivals include the Cat D6 (22.1 t) and the John Deere 750 (17 t).

Shantui SD16 (illustration)

How much does a Shantui SD16 weigh?

The Shantui SD16 weighs 17 tonnes (17,000 kg, 37,479 lb) in working order, with fuel, operator and standard attachment. That is 23% lighter than the Cat D6 (22.1 t). It puts 58 kPa of pressure on the ground. The figures are from Shantui SD16 series specification sheet, Shantui Construction Machinery (trader catalog copy).

What engine is in the Shantui SD16?

The Shantui SD16 has a Weichai WD10G178E25 engine rated at 120 kW (160 hp) net, at 1,850 rpm. It displaces 9.7 L and makes 830 Nm (612 lbf·ft) of torque. Emissions: China-II. The fuel tank holds 315 L (83.2 US gal) and the engine takes 24 L (6.3 US gal) of oil.

What blade does the Shantui SD16 have?

The Shantui SD16's blade capacity is 3.5 m³. In imperial units the blade capacity is 4.58 yd³. The sheet notes: straight-tilt; 4.8 m3 U blade. On the same row of their sheets, the Cat D6 shows 5.7 m³ and the John Deere 750 shows 3.9 m³. The figures are from Shantui SD16 series specification sheet, Shantui Construction Machinery (trader catalog copy).

What are the Shantui SD16 dimensions?

The Shantui SD16 is 5.14 m (16 ft 10 in) long, 2.39 m (7 ft 10 in) wide and 3.03 m (9 ft 11 in) high. As it stands it is too big for the door of a standard shipping container. The Cat D6 is 5.44 m long, 2.54 m wide and 3.19 m high.

Shantui SD16 vs Cat D6: what is the difference?

The Shantui SD16 is 23% lighter than the Cat D6: 17 t against 22.1 t. The Shantui SD16 digs deeper (0.54 m against 0.502 m) and is narrower to transport (2.39 m against 2.54 m). The Cat D6 has more gross power (190 kW against 131 kW), has a bigger blade (5.7 m³ against 3.5 m³) and carries more fuel (341 L against 315 L).

Shantui SD16 vs Cat D6, every figure

Shantui SD16 dimensions

Shantui SD16, side view with dimensions (illustration)3.03 m2.43 m5.14 m
Side view
Shantui SD16, front view (illustration)2.39 m
Front view
Overall height
3.03 m
Track on ground
2.43 m
Overall length
5.14 m
Overall width
2.39 m

Illustration; figures from the maker's sheet.

How big is the Shantui SD16?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Shantui SD16 drawn to scale beside a person and a pickup truck. The Shantui SD16 is 5.14 m long - about the length of a pickup truck - and 3.03 m tall, 1.7 times a person's height.Shantui SD165.14 × 3.03 mPerson1.75 m tallPickup truck5.3 × 1.8 m
The Shantui SD16 is 5.14 m long - about the length of a pickup truck - and 3.03 m tall, 1.7 times a person's height.

Shantui SD16 specifications

Every figure is the maker's, with the document and page it came from. Sheet last updated 17 November 2026.

54 figures in 7 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall length (with blade and ripper)6.207 mStraight-tilt blade and three-shank ripper, as drawn on the sheet[1] p.2
Overall length (with blade)5.14 mListed by Shantui as machine length with drawbar, blade tip to rear of machine; SD16C 5.427 m, SD16F 5.35 m[1] p.2
Track length on ground2.43 mTrack grounding length[1] p.2
Overall height3.032 mListed by Shantui as machine height (without ROPS); the drawing reaches the cab roof[1] p.2
Blade height1.149 mStraight-tilt blade; 1.12 m U blade[1] p.2
Blade lift height1.095 mMaximum lifting height of blade[1] p.2
Blade digging depth0.54 mMaximum digging depth of blade[1] p.2
Dimensions, part 2 of 2
FigureValue (metric)Source
Blade width3.455 mStraight-tilt blade; 3.556 m U blade[1] p.2
Track gauge1.88 m[1] p.2
Grouser height0.065 m[1] p.2
Ripper maximum penetration0.572 mThree-shank ripper; the drawing shows 570 mm[1] p.2
Ripper maximum lift above ground0.592 mThree-shank ripper; the drawing shows 600 mm[1] p.2
Width over tracks2.39 mOuter edge of left track shoe to outer edge of right (standard 510 mm shoes)[1] p.2
Ground clearance0.4 m[1] p.2

Weight

Weight
FigureValue (metric)Source
Operating weight17,000 kgStandard SD16; SD16C 17,370 kg, SD16E 17,346 kg, SD16F 17,500 kg, SD16L and SD16R 18,460 kg[1] p.2
Ground pressure58 kPaStandard configuration; 59.2 kPa SD16C, 55 kPa SD16E and SD16F, 25 kPa SD16L and SD16R[1] p.2
Ripper weight (3-shank)1,631 kg[1] p.2

Engine

Engine, part 1 of 2
FigureValue (metric)Source
Engine modelWeichai WD10G178E25SD16C and SD16F use the Shangchai SC11CB184G2B1[1] p.2
EmissionsChina-II[1] p.2
Cylinders6[1] p.2
Bore x stroke126 x 130 mm[1] p.2
Displacement9.7 L[1] p.2
Engine, part 2 of 2
FigureValue (metric)Source
Gross power131 kW (175 hp)At 1,850 rpm[1] p.2
Net power120 kW (160 hp)At 1,850 rpm[1] p.2
Rated engine speed1,850 rpm[1] p.2
Max torque830 NmAt 1,100 to 1,200 rpm[1] p.2
CoolingMechanical fan[1] p.2

Transmission

Transmission, part 1 of 2
FigureValue (metric)Source
TransmissionShantui Torqflow, planetary gear, hydraulically actuated, forced lubrication; 3 forward / 3 reverse[1] p.2
Torque converter3-element, single stage, 1-phase[1] p.2
Travel speed, forward (max)9.6 km/h3rd gear[1] p.2
Travel speed, reverse (max)12.5 km/h3rd gear[1] p.2
Travel speed, 1st forward3.3 km/hReverse 4.28 kph[1] p.2
Transmission, part 2 of 2
FigureValue (metric)Source
Travel speed, 2nd forward5.8 km/hReverse 7.59 kph[1] p.2
Main driveSpiral bevel gear, single-stage speed reduction, splash lubrication[1] p.2
Steering clutchWet multi-disc, disc spring loaded, hydraulically actuated, hand operated, interconnected with steering brake[1] p.2
BrakeWet contracting band, foot operated with hydraulic booster[1] p.2
Final driveSpur gear, double reduction, splash lubrication[1] p.2

Undercarriage

Undercarriage, part 1 of 2
FigureValue (metric)Source
UndercarriageSwing-type sprayed beam, suspended structure of equalizer bar[1] p.2
Track typeAssembled, single grouser[1] p.2
Track shoes (each side)37[1] p.2
Track rollers (each side)6[1] p.2
Undercarriage, part 2 of 2
FigureValue (metric)Source
Carrier rollers (each side)2[1] p.2
Track pitch203 mm[1] p.2
Shoe width options510 mm standard; 560 mm and 610 mm optional[1] p.2
Ground contact area24,786 cm2[1] p.2

Blade

Blade
FigureValue (metric)Source
Blade typeStraight-tilt (U blade optional)[1] p.2
Blade capacity3.5 m³Straight-tilt; 4.8 m3 U blade[1] p.2
Blade digging angle55 deg +/- 3 deg[1] p.2

Ripper

Ripper, part 1 of 2
FigureValue (metric)Source
Ripper typeThree-shank ripper[1] p.2
Ripper length (at deepest ripping)1.58 m[1] p.2
Ripper width2.08 m[1] p.2
Ripper, part 2 of 2
FigureValue (metric)Source
Ripping width1.9 m[1] p.2
Distance between ripper teeth0.95 m[1] p.2
Departure angle (at highest lifting)32°[1] p.2

Build: Shantui SD16 with the Weichai WD10G178E25 engine (China-II), straight-tilt blade and three-shank ripper, from Shantui's 160 hp hydraulic-drive SD16 series sheet (SD16, SD16C, SD16E, SD16F, SD16L, SD16R columns; the SD16 column is used). The sheet is unlettered: dimension numbers here are ours, and the drawing shows the straight-tilt blade with a ripper.

  1. [1]Shantui SD16 series specification sheet, Shantui Construction Machinery (trader catalog copy)

Shantui SD16 service

What each system holds and when Shantui says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.

Service capacities

Fuel tank
315 L83.2 US gal
Cooling system
62.8 L16.6 US gal
Engine oil
24 L6.3 US gal
Transmission
52 L13.7 US gal
Drive axle
70 L18.5 US gal
Final drives (each)
21 L5.5 US gal
Hydraulic tank
112 L29.6 US gal

Shantui SD16 against its rivals

The dozers nearest in weight from other makers, figure by figure, each shown at the same scale.

Shantui SD16, Cat D6, John Deere 750, Cat D5: specifications side by side
FigureShantui SD16this pageCat D6 specsJohn Deere 750 specsCat D5 specs
Operating weight17,000 kg22,130 kg17,041 kg17,080 kg
Gross power131 kW (175 hp)190 kW (255 hp)not on its sheet150 kW (201 hp)
Digging depth0.54 m0.502 m0.648 m0.559 m
Blade capacity3.5 m³5.7 m³3.9 m³3.5 m³
Maximum drawbar pullnot on its sheet422 kN259 kN320 kN
Pump flownot on its sheet204 L/min130 L/min127 L/min
Fuel tank315 L341 L362 L315 L
Travel speed, forward (max)9.6 km/h10.7 km/h9.7 km/h9.8 km/h
Width over tracks2.39 m2.54 m2.44 m2.5 m
Every figureFull sheetShantui SD16 vs Cat D6

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the Shantui SD16 if you need a narrower machine to move (2.39 m).
  • Pick the Cat D6 if you need more gross power (190 kW), a bigger blade (5.7 m³) and more digging force (422 kN).
  • Pick the John Deere 750 if you need a deeper dig (0.648 m) and a bigger fuel tank (362 L).

Shantui SD16 prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

No Shantui SD16 is listed in the UAE on EquipmentsFinder right now. The prices below are for all dozers, and a request reaches the suppliers who have one.

Typical hire, per daymedian of 4

AED 1,350 /day

No priced Shantui SD16 for hire yet: this is all dozers

Low AED 1,000High AED 3,000

No Shantui SD16 for rent listed right now.

Request a Shantui SD16

Who is asking for dozers in the UAE

Contractors posted 21 requests for dozers on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Abu Dhabi (11), Sharjah (6) and Dubai (4). Requests name a kind of machine, not a model, so this counts every dozer, the Shantui SD16 among them.

Requests, last 12 months
21
For Abu Dhabi
11
For Sharjah
6
  • Dozer D-8 and D-9 Required For RentAbu Dhabi / 17 November 2026
  • Dozer D-8 Required For RentAbu Dhabi / 9 November 2026
  • Wheel Dozer Required For RentAbu Dhabi / 7 November 2026

Open dozer requests on the Inquiry BoardPost a request for a Shantui SD16

Does a Shantui SD16 fit in a shipping container?

The machine as it stands on the sheet. Your haulier or forwarder confirms the load.

No. As it stands on the sheet the Shantui SD16 is 2.39 m wide against a 2.34 m door opening and 3.03 m high against a 2.28 m door of a standard container, so it ships on a flat rack, by RoRo or as break-bulk unless it is stripped down.

Length
5.14 m
Width
2.39 m
Height
3.03 m
Weight
17 t

Container figures: door opening 2.34 m wide by 2.28 m high, 5.9 m inside a 20 ft box and 12.03 m inside a 40 ft one (Hapag-Lloyd container specification). A size check only: payload is on each container's plate. Trailer class and road permits depend on the haulier and the route, so they are not given here.

Tools for a Shantui SD16

For the people who run one: codes, charts and calculators that fit a dozer.

Same class: 20 ton dozers

20 ton dozers with an operating weight of 15 to 25 t, lightest first. The Shantui SD16 is 1 of 7; every figure is the maker's.

  1. 1Shantui SD16This page17 t
  2. 2John Deere 75017 t
  3. 3Cat D517.1 t
  4. 4Komatsu D65EX-1821.3 t
  5. 5John Deere 850L21.6 t
  6. 6Cat D622.1 t
  7. 7Shantui SD2223.4 t

Popular Shantui dozer models

More Shantui SD16 questions

What size blade does a Shantui SD16 have?

3.5 m³ (4.58 yd³) with the standard blade.

How wide is the blade on a Shantui SD16?

3.455 m (11.3 ft).

How much horsepower does the Shantui SD16 have?

160 hp (120 kW) net, At 1,850 rpm.

How tall is a Shantui SD16?

3.03 m (9 ft 11 in) overall.

How wide is a Shantui SD16?

2.39 m (7 ft 10 in) overall.

How much torque does a Shantui SD16 have?

830 Nm (612 lbf·ft), at 1,100 to 1,200 rpm.

How deep can the ripper on a Shantui SD16 dig?

0.572 m (1.9 ft).

How fast does a Shantui SD16 go?

Its top speed is 9.6 km/h (6 mph), 3rd gear.

What is the ground pressure of a Shantui SD16?

58 kPa.

What are the Shantui SD16's main competitors?

The machines nearest it in size are the John Deere 750, the Cat D5 and the Komatsu D65EX-18. Each has a side-by-side comparison on EquipmentsFinder.

Is the Shantui SD16 sold in the UAE?

Yes. The Shantui SD16 is sold in the UAE and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a Shantui SD16 used for?

A crawler dozer: a tracked tractor with a blade at the front, built to push, spread and level large volumes of earth. Typical jobs: bulk earthmoving and pushing, spreading and levelling fill, road and pad building, ripping hard ground.

Embed this spec card

The Shantui SD16's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/shantui-sd16" title="Shantui SD16 specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/shantui-sd16">Shantui SD16 specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Shantui SD16 on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.