Specification sheetIssued 20 November 2026
Shantui · dozer
Shantui SD16
Shantui SD16 with the Weichai WD10G178E25 engine (China-II), straight-tilt blade and three-shank ripper, from Shantui's 160 hp hydraulic-drive SD16 series sheet (SD16, SD16C, SD16E, SD16F, SD16L, SD16R columns; the SD16 column is used). The sheet is unlettered: dimension numbers here are ours, and the drawing shows the straight-tilt blade with a ripper.
UAEGlobal
- Blade capacity
- 3.5 m³
- power
- 120 kW (160 hp)
- Operating weight
- 17,000 kg
- Blade width
- 3.455 m
3.03 m2.43 m5.14 m
2.39 mDimensions
- Width over tracks (Outer edge of left track shoe to outer edge of right (standard 510 mm shoes))
- 2.39 m
- Ground clearance
- 0.4 m
Weight
- Operating weight (Standard SD16; SD16C 17,370 kg, SD16E 17,346 kg, SD16F 17,500 kg, SD16L and SD16R 18,460 kg)
- 17,000 kg
- Ground pressure (Standard configuration; 59.2 kPa SD16C, 55 kPa SD16E and SD16F, 25 kPa SD16L and SD16R)
- 58 kPa
- Ripper weight (3-shank)
- 1,631 kg
Engine
- Engine model (SD16C and SD16F use the Shangchai SC11CB184G2B1)
- Weichai WD10G178E25
- Emissions
- China-II
- Cylinders
- 6
- Bore x stroke
- 126 x 130 mm
- Displacement
- 9.7 L
- Gross power (At 1,850 rpm)
- 131 kW (175 hp)
- Net power (At 1,850 rpm)
- 120 kW (160 hp)
- Rated engine speed
- 1,850 rpm
- Max torque (At 1,100 to 1,200 rpm)
- 830 Nm
- Cooling
- Mechanical fan
Transmission
- Transmission
- Shantui Torqflow, planetary gear, hydraulically actuated, forced lubrication; 3 forward / 3 reverse
- Torque converter
- 3-element, single stage, 1-phase
- Travel speed, forward (max) (3rd gear)
- 9.6 km/h
- Travel speed, reverse (max) (3rd gear)
- 12.5 km/h
- Travel speed, 1st forward (Reverse 4.28 kph)
- 3.3 km/h
- Travel speed, 2nd forward (Reverse 7.59 kph)
- 5.8 km/h
- Main drive
- Spiral bevel gear, single-stage speed reduction, splash lubrication
- Steering clutch
- Wet multi-disc, disc spring loaded, hydraulically actuated, hand operated, interconnected with steering brake
- Brake
- Wet contracting band, foot operated with hydraulic booster
- Final drive
- Spur gear, double reduction, splash lubrication
Undercarriage
- Undercarriage
- Swing-type sprayed beam, suspended structure of equalizer bar
- Track type
- Assembled, single grouser
- Track shoes (each side)
- 37
- Track rollers (each side)
- 6
- Carrier rollers (each side)
- 2
- Track pitch
- 203 mm
- Shoe width options
- 510 mm standard; 560 mm and 610 mm optional
- Ground contact area
- 24,786 cm2
Blade
- Blade type
- Straight-tilt (U blade optional)
- Blade capacity (Straight-tilt; 4.8 m3 U blade)
- 3.5 m³
- Blade digging angle
- 55 deg +/- 3 deg
Ripper
- Ripper type
- Three-shank ripper
- Ripper length (at deepest ripping)
- 1.58 m
- Ripper width
- 2.08 m
- Ripping width
- 1.9 m
- Distance between ripper teeth
- 0.95 m
- Departure angle (at highest lifting)
- 32°
Service capacities
- Fuel tank
- 315 L
- Cooling system
- 62.8 L
- Engine oil
- 24 L
- Transmission
- 52 L
- Drive axle
- 70 L
- Final drives (each) (SD16F, SD16L and SD16R 25 L per side)
- 21 L
- Hydraulic tank
- 112 L