Specification sheetIssued 20 November 2026
Shantui · dozer
Shantui SD16
Shantui SD16 with the Weichai WD10G178E25 engine (China-II), straight-tilt blade and three-shank ripper, from Shantui's 160 hp hydraulic-drive SD16 series sheet (SD16, SD16C, SD16E, SD16F, SD16L, SD16R columns; the SD16 column is used). The sheet is unlettered: dimension numbers here are ours, and the drawing shows the straight-tilt blade with a ripper.
UAEGlobal
- Blade capacity
- 4.58 yd³
- power
- 160 hp
- Operating weight
- 37,479 lb
- Blade width
- 11.3 ft
9.9 ft8 ft16.9 ft
7.8 ftDimensions
- Width over tracks (Outer edge of left track shoe to outer edge of right (standard 510 mm shoes))
- 7.8 ft
- Ground clearance
- 1.3 ft
Weight
- Operating weight (Standard SD16; SD16C 17,370 kg, SD16E 17,346 kg, SD16F 17,500 kg, SD16L and SD16R 18,460 kg)
- 37,479 lb
- Ground pressure (Standard configuration; 59.2 kPa SD16C, 55 kPa SD16E and SD16F, 25 kPa SD16L and SD16R)
- 58 kPa
- Ripper weight (3-shank)
- 3,596 lb
Engine
- Engine model (SD16C and SD16F use the Shangchai SC11CB184G2B1)
- Weichai WD10G178E25
- Emissions
- China-II
- Cylinders
- 6
- Bore x stroke
- 126 x 130 mm
- Displacement
- 2.6 US gal
- Gross power (At 1,850 rpm)
- 175 hp
- Net power (At 1,850 rpm)
- 160 hp
- Rated engine speed
- 1,850 rpm
- Max torque (At 1,100 to 1,200 rpm)
- 612 lbf·ft
- Cooling
- Mechanical fan
Transmission
- Transmission
- Shantui Torqflow, planetary gear, hydraulically actuated, forced lubrication; 3 forward / 3 reverse
- Torque converter
- 3-element, single stage, 1-phase
- Travel speed, forward (max) (3rd gear)
- 6 mph
- Travel speed, reverse (max) (3rd gear)
- 7.8 mph
- Travel speed, 1st forward (Reverse 4.28 kph)
- 2 mph
- Travel speed, 2nd forward (Reverse 7.59 kph)
- 3.6 mph
- Main drive
- Spiral bevel gear, single-stage speed reduction, splash lubrication
- Steering clutch
- Wet multi-disc, disc spring loaded, hydraulically actuated, hand operated, interconnected with steering brake
- Brake
- Wet contracting band, foot operated with hydraulic booster
- Final drive
- Spur gear, double reduction, splash lubrication
Undercarriage
- Undercarriage
- Swing-type sprayed beam, suspended structure of equalizer bar
- Track type
- Assembled, single grouser
- Track shoes (each side)
- 37
- Track rollers (each side)
- 6
- Carrier rollers (each side)
- 2
- Track pitch
- 0.7 ft
- Shoe width options
- 510 mm standard; 560 mm and 610 mm optional
- Ground contact area
- 24,786 cm2
Blade
- Blade type
- Straight-tilt (U blade optional)
- Blade capacity (Straight-tilt; 4.8 m3 U blade)
- 4.58 yd³
- Blade digging angle
- 55 deg +/- 3 deg
Ripper
- Ripper type
- Three-shank ripper
- Ripper length (at deepest ripping)
- 5.2 ft
- Ripper width
- 6.8 ft
- Ripping width
- 6.2 ft
- Distance between ripper teeth
- 3.1 ft
- Departure angle (at highest lifting)
- 32°
Service capacities
- Fuel tank
- 83.2 US gal
- Cooling system
- 16.6 US gal
- Engine oil
- 6.3 US gal
- Transmission
- 13.7 US gal
- Drive axle
- 18.5 US gal
- Final drives (each) (SD16F, SD16L and SD16R 25 L per side)
- 5.5 US gal
- Hydraulic tank
- 29.6 US gal