EF Logo

rollermade by HammUAE, Global

Hamm GRW 18Specs, weight and dimensions

Weight
15 t
15,045 kg
Horsepower
113.9 hp
85 kW
Engine
Deutz TCD 2012 L04 2V

Quick answer

The Hamm GRW 18 is a 15-tonne roller with a Deutz TCD 2012 L04 2V engine rated at 85 kW (113.9 hp). It suits soil and sub-base compaction, asphalt rolling and road and highway works. Nearest in weight are the Cat CS56B (11.5 t) and the Cat CS533E (10.8 t).

Hamm GRW 18 (illustration)

How much does a Hamm GRW 18 weigh?

The Hamm GRW 18 weighs 15 tonnes (15,045 kg, 33,169 lb) in working order, with fuel, operator and standard attachment. That is 31% heavier than the Cat CS56B (11.5 t) and 39% heavier than the Cat CS533E (10.8 t). The figures are from Hamm GRW 18 rubber-wheeled roller data sheet 05.13 (912573 en-GB V4), hosted by MM Italia.

What engine is in the Hamm GRW 18?

The Hamm GRW 18 has a Deutz TCD 2012 L04 2V engine rated at 85 kW (113.9 hp) net, SAE J1349 at 2,300 rpm. Emissions: EU Stage IIIA / US EPA Tier 3. The fuel tank holds 198 L (52.3 US gal). The figures are from Hamm GRW 18 rubber-wheeled roller data sheet 05.13 (912573 en-GB V4), hosted by MM Italia.

Deutz fault codes

What are the Hamm GRW 18 dimensions?

The Hamm GRW 18 is 4.75 m (15 ft 7 in) long, 2.16 m (7 ft 1 in) wide and 3.35 m (11 ft) high. As it stands it is too big for the door of a standard shipping container. The Cat CS56B is 5.86 m long, 2.30 m wide and 3.11 m high.

Hamm GRW 18 vs Cat CS56B: what is the difference?

The Hamm GRW 18 is 31% heavier than the Cat CS56B: 15 t against 11.5 t. The Hamm GRW 18 is narrower to transport (2.16 m against 2.3 m). The Cat CS56B carries more fuel (242 L against 198 L) and is lower to transport (3.11 m against 3.355 m). Both sets of figures are the makers’ own, for the builds on our sheets.

Hamm GRW 18 dimensions

Hamm GRW 18, side view with dimensions (illustration)3.36 m3.6 m4.75 m
Side view
Hamm GRW 18, front view (illustration)2.16 m
Front view
Overall height
3.36 m
Wheelbase
3.6 m
Overall length
4.75 m
Overall width
2.16 m

Illustration; figures from the maker's sheet.

How big is the Hamm GRW 18?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Hamm GRW 18 drawn to scale beside a person and a pickup truck. The Hamm GRW 18 is 4.75 m long - 90% of a pickup truck's length - and 3.36 m tall, 1.9 times a person's height.Hamm GRW 184.75 × 3.36 mPerson1.75 m tallPickup truck5.3 × 1.8 m
The Hamm GRW 18 is 4.75 m long - 90% of a pickup truck's length - and 3.36 m tall, 1.9 times a person's height.

Hamm GRW 18 specifications

Every figure is the maker's, with the document and page it came from. Sheet last updated 17 November 2026.

39 figures in 6 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall length4.745 m[1] p.2
Overall width2.16 m[1] p.2
Overall height3.355 mcab version, to the top of the ROPS posts[1] p.2
Wheelbase3.595 m[1] p.2
Width over tyres1.744 mfront and rear axle both 1,744 mm[1] p.2
Diameter of tyres1.07 mfront and rear (1,070 / 1,070 mm)[1] p.2
Dimensions, part 2 of 2
FigureValue (metric)Source
Height for loading, minimum2.63 m[1] p.2
Maximum working width1.986 m[1] p.2
Ground clearance, left/right0.8 m800 / 800 mm[1] p.2
Ground clearance, centre0.33 m[1] p.2
Turning radius (inner)5.9 m[1] p.2

Weight

Weight, part 1 of 2
FigureValue (metric)Source
Operating weight15,045 kgwith cab and ROPS, empty ballast[1] p.2
Operating weight, no cab or ROPS13,985 kgbasic weight[1] p.2
Maximum operating weight28,000 kgfully ballasted[1] p.2
Axle load, front6,910 kg[1] p.2
Weight, part 2 of 2
FigureValue (metric)Source
Axle load, rear8,135 kg[1] p.2
Load per tyre, front1,728 kg[1] p.2
Load per tyre, rear2,034 kg[1] p.2
French classificationdata 20.3 / class P0[1] p.2

Engine

Engine, part 1 of 2
FigureValue (metric)Source
Engine modelDeutz TCD 2012 L04 2V[1] p.2
Cylinders4[1] p.2
EmissionsEU Stage IIIA / US EPA Tier 3[1] p.2
Engine, part 2 of 2
FigureValue (metric)Source
Net power85 kW (113.9 hp)SAE J1349 at 2,300 rpm[1] p.2
Engine power (ISO 14396)85 kW (115.6 PS)at 2,300 rpm[1] p.2
Rated speed2,300 rpm[1] p.2

Performance

Performance, part 1 of 2
FigureValue (metric)Source
Top speed21.2 km/htransport gear[1] p.2
Travel speed, working gear, low range5.2 km/hstepless from 0[1] p.2
Travel speed, working gear, high range11.5 km/hstepless from 0[1] p.2
Performance, part 2 of 2
FigureValue (metric)Source
Travel speed, transport gear21.2 km/hstepless from 0[1] p.2
Gradeability, with ballast25%Hamm's sheet reads "with/no ballast: 25 / 35"[1] p.2
Gradeability, without ballast35%[1] p.2

Drive and steering

Drive and steering, part 1 of 2
FigureValue (metric)Source
DriveHydrodynamic drive, rear axle[1] p.2
SteeringTwo-point steering, hydrostatic, steering wheel[1] p.2
Drive and steering, part 2 of 2
FigureValue (metric)Source
Steering angle, each direction30°[1] p.2
Oscillation angle, each direction4°[1] p.2

Tyres

Tyres, part 1 of 2
FigureValue (metric)Source
Tyre size11.00-R20 front and rear[1] p.2
Number of tyres4 front, 4 rear[2]
Tyres, part 2 of 2
FigureValue (metric)Source
Tyre overlap50 mmon both sides[1] p.1
Tyre pressure range, automatic tyre level system (option)1.5 to 8 bar[1] p.2

Build: Hamm GRW 18 pneumatic tyre roller (Deutz TCD 2012 L04 2V, EU Stage IIIA / Tier 3, 15,045 kg with cab) from Hamm's data sheet dated 05.13, ref. 912573 V4. Hamm now sells the successor as the HP 180i, which is not covered.

  1. [1]Hamm GRW 18 rubber-wheeled roller data sheet 05.13 (912573 en-GB V4), hosted by MM Italia
  2. [2]Construction Equipment Guide, Hamm GRW 18 spec chart (tyre count)
  3. [3]Ritchie Specs, Hamm GRW18 pneumatic roller (cross-check)

Hamm GRW 18 service

What each system holds and when Hamm says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.

Service capacities

Fuel tank
198 L52.3 US gal
Water tank
750 L198 US gal
Water-sprinkling system
Pressure, manual actuation

Hamm GRW 18 against its rivals

The rollers nearest in weight from other makers, figure by figure, each shown at the same scale.

Hamm GRW 18, Cat CS56B, Cat CS533E, Bomag BW 211 D-5: specifications side by side
FigureHamm GRW 18this pageCat CS56B specsCat CS533E specsBomag BW 211 D-5 specs
Operating weight15,045 kg11,500 kg10,840 kg10,600 kg
Net power85 kW (113.9 hp)not on its sheet93 kW (125 hp)95 kW (128 hp)
Fuel tank198 L242 L180 L250 L
Overall width2.16 m2.3 m2.29 m2.27 m
Overall height3.355 m3.11 m3.06 m2.99 m
Every figureFull sheet

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the Hamm GRW 18 if you need a narrower machine to move (2.16 m).
  • Pick the Bomag BW 211 D-5 if you need more power (95 kW), a bigger fuel tank (250 L) and a lower machine to move (2.99 m).

Hamm GRW 18 prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

Hamm GRW 18 on EquipmentsFinder in the UAE now: none for rent, 1 listed for sale. Too few carry a price to give a Hamm GRW 18 range, so the figure below is for all rollers.

See all 1

Typical asking price, usedmedian of 5

AED 96,000

No priced Hamm GRW 18 for sale yet: this is all rollers

Low AED 65,000High AED 145,000

Who is asking for rollers in the UAE

Contractors posted 26 requests for rollers on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Dubai (15), Abu Dhabi (6) and Sharjah (2). Requests name a kind of machine, not a model, so this counts every roller, the Hamm GRW 18 among them.

Requests, last 12 months
26
For Dubai
15
For Abu Dhabi
6
  • Brand New Walk Behind Roller 1 Ton Required For PurchaseDubai / 20 November 2026
  • Plate Compactor Required For RentDubai / 18 November 2026
  • 10 Ton Road Roller Required For Rent URGENTLY18 November 2026

Open roller requests on the Inquiry BoardPost a request for a Hamm GRW 18

Does a Hamm GRW 18 fit in a shipping container?

The machine as it stands on the sheet. Your haulier or forwarder confirms the load.

No. As it stands on the sheet the Hamm GRW 18 is 3.35 m high against a 2.28 m door of a standard container, so it ships on a flat rack, by RoRo or as break-bulk unless it is stripped down.

Length
4.75 m
Width
2.16 m
Height
3.36 m
Weight
15 t

Container figures: door opening 2.34 m wide by 2.28 m high, 5.9 m inside a 20 ft box and 12.03 m inside a 40 ft one (Hapag-Lloyd container specification). A size check only: payload is on each container's plate. Trailer class and road permits depend on the haulier and the route, so they are not given here.

Tools for a Hamm GRW 18

For the people who run one: codes, charts and calculators that fit a roller.

Ranked: Rollers by operating weight

By operating weight, heaviest first. The Hamm GRW 18 is 1 of 8; every figure is the maker's.

  1. 1Hamm GRW 18This page15 t
  2. 2Cat CS56B11.5 t
  3. 3Hamm 341111.5 t
  4. 4Cat CS533E10.8 t
  5. 5Bomag BW 211 D-510.6 t
  6. 6Hamm HD 11010.5 t
  7. 7Dynapac CA2500D10.3 t
  8. 8Bomag BW 120 AD-52.75 t

Popular Hamm roller models

More Hamm GRW 18 questions

How much horsepower does the Hamm GRW 18 have?

113.9 hp (85 kW) net, SAE J1349 at 2,300 rpm.

How tall is a Hamm GRW 18?

3.35 m (11 ft) overall.

How wide is a Hamm GRW 18?

2.16 m (7 ft 1 in) overall.

How fast does a Hamm GRW 18 go?

Its top speed is 21.2 km/h (13.2 mph), transport gear.

What is the turning radius of a Hamm GRW 18?

5.9 m (232.3 in).

What is the Hamm GRW 18's fuel tank capacity?

198 L (52.3 US gal).

What size roller is a Hamm GRW 18?

At 15 tonnes it is a 15-tonne class roller.

What are the Hamm GRW 18's main competitors?

The machines nearest it in size are the Cat CS56B, the Hamm 3411 and the Cat CS533E. Each has a side-by-side comparison on EquipmentsFinder.

Is the Hamm GRW 18 sold in the UAE?

Yes. The Hamm GRW 18 is sold in the UAE and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a Hamm GRW 18 used for?

A roller: a self-propelled compactor that presses soil, sub-base or asphalt to the density a road, pad or foundation needs. Typical jobs: soil and sub-base compaction, asphalt rolling, road and highway works, site pads and foundations.

Embed this spec card

The Hamm GRW 18's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/hamm-grw18" title="Hamm GRW 18 specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/hamm-grw18">Hamm GRW 18 specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Hamm GRW 18 on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.