EF Logo

rollermade by BomagUAE, Global

Bomag BW 211 D-5Specs, weight and dimensions

Weight
10.6 t
10,600 kg
Drum width
2.13 m
83.9 in
Est. new price
AED 550k-700k

Quick answer

The Bomag BW 211 D-5 is a 10.6-tonne roller with a Deutz TCD 3.6 L4 engine rated at 95 kW (128 hp). It rolls a 2.13 m drum and travels at up to 11 km/h. It suits soil and sub-base compaction, asphalt rolling and road and highway works. People compare it with the Cat CS533E (10.8 t) and the Dynapac CA2500D (10.3 t).

Bomag BW 211 D-5 (illustration)

How much does a Bomag BW 211 D-5 weigh?

The Bomag BW 211 D-5 weighs 10.6 tonnes (10,600 kg, 23,369 lb) in working order, with fuel, operator and standard attachment. That is 2% lighter than the Cat CS533E (10.8 t) and 3% heavier than the Dynapac CA2500D (10.3 t). The figures are from Bomag BW 211 D-5 PL single drum roller technical data sheet (2026), hosted by SMS Equipment.

What engine is in the Bomag BW 211 D-5?

The Bomag BW 211 D-5 has a Deutz TCD 3.6 L4 engine rated at 95 kW (128 hp) net, ISO 3046; the sheet gives 128 hp as SAE J1995. Emissions: Stage V / Tier 4f (DOC + DPF + SCR). The fuel tank holds 250 L (66.0 gal). The figures are from Bomag BW 211 D-5 PL single drum roller technical data sheet (2026), hosted by SMS Equipment.

Deutz fault codes

How wide is the Bomag BW 211 D-5's drum?

The Bomag BW 211 D-5 rolls a 2.13 m drum and travels at up to 11 km/h. In imperial units the drum width is 83.9 in. The sheet notes: working width. On the same row of their sheets, the Cat CS533E shows 2.134 m and the Dynapac CA2500D shows 2.13 m.

What are the Bomag BW 211 D-5 dimensions?

The Bomag BW 211 D-5 is 5.87 m (19 ft 3 in) long, 2.27 m (7 ft 5 in) wide and 2.99 m (9 ft 10 in) high. As it stands it is too big for the door of a standard shipping container. The Cat CS533E is 5.51 m long, 2.29 m wide and 3.06 m high.

Bomag BW 211 D-5 vs Cat CS533E: what is the difference?

The Bomag BW 211 D-5 is 2% lighter than the Cat CS533E: 10.6 t against 10.8 t. The Bomag BW 211 D-5 has more power (95 kW against 93 kW), carries more fuel (250 L against 180 L) and is narrower to transport (2.27 m against 2.29 m). Both sets of figures are the makers’ own, for the builds on our sheets.

Bomag BW 211 D-5 vs Cat CS533E, every figure

These figures are for the BW 211 D-5. The BW 211 D-40 and BW 211 D-4 are not covered here and have figures of their own, so check the serial plate before using these for one.

Bomag BW 211 D-5 dimensions

Bomag BW 211 D-5, side view with dimensions (illustration)2.99 m2.98 m5.87 m
Side view
Bomag BW 211 D-5, front view (illustration)2.27 m
Front view
Overall height
2.99 m
Wheelbase
2.98 m
Overall length
5.87 m
Overall width
2.27 m

Illustration; figures from the maker's sheet.

How big is the Bomag BW 211 D-5?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Bomag BW 211 D-5 drawn to scale beside a person and a pickup truck. The Bomag BW 211 D-5 is 5.87 m long - about 1.1 pickup trucks - and 2.99 m tall, 1.7 times a person's height.Bomag BW 211 D-55.87 × 2.99 mPerson1.75 m tallPickup truck5.3 × 1.8 m
The Bomag BW 211 D-5 is 5.87 m long - about 1.1 pickup trucks - and 2.99 m tall, 1.7 times a person's height.

Bomag BW 211 D-5 specifications

Every figure is the maker's, with the document and page it came from. Sheet last updated 16 November 2026.

48 figures in 6 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Wheelbase2.975 mdrum centre to rear axle centre[1] p.2
Overall width2.27 m[1] p.2
Drum diameter1.5 m[1] p.2
Height H, lower reference2.26 mmarked H on the maker's drawing, which stops below the cab roof; the sheet gives no name for it[1] p.2
Overall height2.99 mwith ROPS/FOPS cab[1] p.2
Ground clearance0.49 m[1] p.2
Dimensions, part 2 of 2
FigureValue (metric)Source
Overall length5.87 m[1] p.2
Curb clearance, left0.07 mdrum end to edge of machine[1] p.2
Curb clearance, right0.07 m[1] p.2
Drum shell thickness25 mm[1] p.2
Drum width2.13 mworking width[1] p.2
Turning radius (inner)3.68 mtrack radius, inner[1] p.3

Weight

Weight, part 1 of 2
FigureValue (metric)Source
Operating weight10,600 kgCECE, with ROPS cab[1] p.3
Gross weight12,890 kg[1] p.3
Axle load, drum5,670 kgCECE[1] p.3
Weight, part 2 of 2
FigureValue (metric)Source
Axle load, wheels4,930 kgCECE[1] p.3
Static linear load26.6 kg/cmCECE[1] p.3

Engine

Engine, part 1 of 2
FigureValue (metric)Source
Engine modelDeutz TCD 3.6 L4[1] p.3
EmissionsStage V / Tier 4f (DOC + DPF + SCR)[1] p.3
Cylinders4[1] p.3
CoolingLiquid[1] p.3
Engine, part 2 of 2
FigureValue (metric)Source
Net power95 kW (128 hp)ISO 3046; the sheet gives 128 hp as SAE J1995[1] p.3
Rated speed2,000 rpm[1] p.3
Electrical system12 V[1] p.3

Performance

Performance, part 1 of 2
FigureValue (metric)Source
Travel speed11 km/htop speed, gear 4; gears 1 to 4 are 0-5, 0-6, 0-8 and 0-11 km/h[1] p.3
Travel speed, gear 15 km/h[1] p.3
Travel speed, gear 26 km/h[1] p.3
Travel speed, gear 38 km/h[1] p.3
Gradeability, without vibration51%[1] p.3
Gradeability, with vibration48%[1] p.3
Vibration frequency (high/low)30 / 34 Hzhigh / low amplitude[1] p.3
Nominal amplitude (high/low)1.95 / 1.00 mm[1] p.3
Centrifugal force (high/low)240 / 158 kN24.5 / 16.1 t[1] p.3
Performance, part 2 of 2
FigureValue (metric)Source
Compaction output, rock fill400-800 m3/h[1] p.2
Compaction output, gravel and sand270-540 m3/h[1] p.2
Compaction output, mixed soil220-440 m3/h[1] p.2
Compaction output, silt and clay110-220 m3/h[1] p.2
Compacted layer thickness, rock fill0.7 m[1] p.2
Compacted layer thickness, gravel and sand0.5 m[1] p.2
Compacted layer thickness, mixed soil0.4 m[1] p.2
Compacted layer thickness, silt and clay0.2 m[1] p.2

Drive and steering

Drive and steering, part 1 of 2
FigureValue (metric)Source
Travel and vibration driveHydrostatic, drum driven[1] p.3
Service brakeHydrostatic[1] p.3
Parking brakeHydromechanical (spring-applied)[1] p.3
Drive and steering, part 2 of 2
FigureValue (metric)Source
SteeringHydrostatic, oscillating-articulated[1] p.3
Steering angle, each direction35°[1] p.3
Oscillation angle, each direction12°[1] p.3

Tyres

Tyres
FigureValue (metric)Source
Tyre size23.1-26 12PR[1] p.3

Build: Bomag BW 211 D-5 smooth single drum roller (Deutz TCD 3.6 L4, Stage V / Tier 4f, 2.13 m drum) from Bomag's current data sheet, which is titled BW 211 D-5 PL. The earlier BW 211 D-40 is not covered.

  1. [1]Bomag BW 211 D-5 PL single drum roller technical data sheet (2026), hosted by SMS Equipment
  2. [2]Bomag BW 211 D-5 / PD-5 technical data sheet PRS 586 08 010 (2016, Stage IV), hosted by Maquinza
  3. [3]Bomag BW 211 D-5 / PD-5 technical data sheet PRE 586 08 001 (2015), hosted by SMS Equipment

Bomag BW 211 D-5 service

What each system holds and when Bomag says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.

Service capacities

Fuel tank
250 L66.0 gal

Bomag BW 211 D-5 against its rivals

The rollers nearest in weight from other makers, figure by figure, each shown at the same scale.

Bomag BW 211 D-5, Cat CS533E, Dynapac CA2500D, Hamm HD 110: specifications side by side
FigureBomag BW 211 D-5this pageCat CS533E specsDynapac CA2500D specsHamm HD 110 specs
Operating weight10,600 kg10,840 kg10,300 kg10,530 kg
Net power95 kW (128 hp)93 kW (125 hp)not on its sheet100 kW (134 hp)
Fuel tank250 L180 L255 L185 L
Turning radius (outer)not on its sheet5.81 m5.45 mnot on its sheet
Overall width2.27 m2.29 m2.3 m1.81 m
Overall height2.99 m3.06 m2.87 m3.05 m
Every figureFull sheetBomag BW 211 D-5 vs Cat CS533EBomag BW 211 D-5 vs Dynapac CA2500D

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • The Bomag BW 211 D-5 leads none of these figures, so the choice comes down to price, hours and dealer support.
  • Pick the Cat CS533E if you want the heaviest of the 4 (10.8 t); it leads no other figure here.
  • Pick the Dynapac CA2500D if you need a bigger fuel tank (255 L), a tighter turn (5.45 m) and a lower machine to move (2.87 m).
  • Pick the Hamm HD 110 if you need more power (100 kW) and a narrower machine to move (1.81 m).

Bomag BW 211 D-5 prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

A new Bomag BW 211 D-5 costs about AED 550,000 to AED 700,000, base machine before options, freight and tax - an estimate from new units for sale, checked November 2026. Sources: machinerytrader.com, titanmachinery.com.

Bomag BW 211 D-5 on EquipmentsFinder in the UAE now: none for rent, 1 listed for sale. Too few carry a price to give a Bomag BW 211 D-5 range, so the figure below is for all rollers.

See all 1

Typical asking price, usedmedian of 5

AED 96,000

No priced Bomag BW 211 D-5 for sale yet: this is all rollers

Low AED 65,000High AED 145,000

Who is asking for rollers in the UAE

Contractors posted 26 requests for rollers on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Dubai (15), Abu Dhabi (6) and Sharjah (2). Requests name a kind of machine, not a model, so this counts every roller, the Bomag BW 211 D-5 among them.

Requests, last 12 months
26
For Dubai
15
For Abu Dhabi
6
  • Brand New Walk Behind Roller 1 Ton Required For PurchaseDubai / 20 November 2026
  • Plate Compactor Required For RentDubai / 18 November 2026
  • 10 Ton Road Roller Required For Rent URGENTLY18 November 2026

Open roller requests on the Inquiry BoardPost a request for a Bomag BW 211 D-5

Does a Bomag BW 211 D-5 fit in a shipping container?

The machine as it stands on the sheet. Your haulier or forwarder confirms the load.

No. As it stands on the sheet the Bomag BW 211 D-5 is 2.99 m high against a 2.28 m door of a standard container, so it ships on a flat rack, by RoRo or as break-bulk unless it is stripped down.

Length
5.87 m
Width
2.27 m
Height
2.99 m
Weight
10.6 t

Container figures: door opening 2.34 m wide by 2.28 m high, 5.9 m inside a 20 ft box and 12.03 m inside a 40 ft one (Hapag-Lloyd container specification). A size check only: payload is on each container's plate. Trailer class and road permits depend on the haulier and the route, so they are not given here.

Tools for a Bomag BW 211 D-5

For the people who run one: codes, charts and calculators that fit a roller.

Ranked: Rollers by operating weight

By operating weight, heaviest first. The Bomag BW 211 D-5 is 5 of 8; every figure is the maker's.

  1. 1Hamm GRW 1815 t
  2. 2Cat CS56B11.5 t
  3. 3Hamm 341111.5 t
  4. 4Cat CS533E10.8 t
  5. 5Bomag BW 211 D-5This page10.6 t
  6. 6Hamm HD 11010.5 t
  7. 7Dynapac CA2500D10.3 t
  8. 8Bomag BW 120 AD-52.75 t

Popular Bomag roller models

Bomag BW 211 D-5 fault codes and serial number

More Bomag BW 211 D-5 questions

What compaction force does a Bomag BW 211 D-5 have?

Its centrifugal force is 240 / 158 kN, at the maker's stated amplitude.

How much horsepower does the Bomag BW 211 D-5 have?

128 hp (95 kW) net, ISO 3046; the sheet gives 128 hp as SAE J1995.

What is the drum diameter of a Bomag BW 211 D-5?

1.5 m (59.1 in).

What amplitude does a Bomag BW 211 D-5 have?

1.95 / 1.00 mm.

What is the vibration frequency of a Bomag BW 211 D-5?

30 / 34 Hz, high / low amplitude.

What is the static linear load of a Bomag BW 211 D-5?

26.6 kg/cm, CECE.

How tall is a Bomag BW 211 D-5?

2.99 m (9 ft 10 in) overall.

How wide is a Bomag BW 211 D-5?

2.27 m (7 ft 5 in) overall.

What are the Bomag BW 211 D-5's main competitors?

The machines nearest it in size are the Hamm HD 110, the Cat CS533E and the Dynapac CA2500D. Each has a side-by-side comparison on EquipmentsFinder.

Is the Bomag BW 211 D-5 sold in the UAE?

Yes. The Bomag BW 211 D-5 is sold in the UAE and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a Bomag BW 211 D-5 used for?

A roller: a self-propelled compactor that presses soil, sub-base or asphalt to the density a road, pad or foundation needs. Typical jobs: soil and sub-base compaction, asphalt rolling, road and highway works, site pads and foundations.

Embed this spec card

The Bomag BW 211 D-5's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/bomag-bw211d" title="Bomag BW 211 D-5 specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/bomag-bw211d">Bomag BW 211 D-5 specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Bomag BW 211 D-5 on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.