EF Logo

Volvo/Mack · MID 136 brake ECU (ABS)

Volvo/Mack Fault Code MID 136 SID 66 FMI 7

ABS - mechanical system not responding (can set with no fault)

What does Volvo/Mack code MID 136 SID 66 FMI 7 mean?

The brake ECU (ABS) sets this code on some Volvo VN, VHD, VT and VAH trucks built 2010 to 2014 and on Mack trucks, without any failed part. A threshold setting in the ABS ECU software is behind it. Urgency: check soon - the machine may derate or limit a function. Check first: check that no other ABS codes are active and the wheel speed sensors read correctly.

FaultCheckMID 136SID 66FMI 7Volvo/Mack · MID 136 brake ECU (ABS)
MID 136
Which control unit reports it
SID 66
Component at fault
FMI 7
Mechanical system not responding

Can I keep running with it?

Check soon

The machine may derate or limit a function. Find the cause before the next shift.

What should I check first?

Check that no other ABS codes are active and the wheel speed sensors read correctly

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect the Premium Tech Tool or a J1939/J1587 scan tool to the diagnostic socket and read the codes for every module, not only the engine.

Checks

0 of 5 done

Causes

  • ABS ECU threshold setting in old software
  • A real wheel speed sensor or valve fault, so rule it out first
  • Old Bendix configuration file after a calibration

How it failed

You'll notice: ABS lamp comes on.

Part or controllerRead from FMI 7: mechanical system not responding

The controller reports a part, module or its software as faulty or not responding.

ControllerPartSupplySignalGround?
Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins.
Meter test
Check power and ground at the module connector with the key on, then its fuses.
Good result
Battery voltage on power, under 0.2 V drop on ground. Then it needs the service tool.

When to stop

Brake and steering faults are a safety issue on site. Chock the machine and keep it parked until the fault is found and the brakes are tested.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Source

Volvo Trucks Field Service Bulletin FSB 513-001: Brake ECU Reprogramming (MID 136), April 2015 (NHTSA)

This source lists MID 136 SID 66 FMI 7 and its meaning. The guidance on this page is general, not taken from it.

The source covers: Volvo VN, VHD, VT and VAH built Jan 2010 - Nov 2014 with basic ESP package; Mack trucks with ABS (Mack solution CBR-407).

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.