EF Logo

J1939 · Air intake

SPN 3563 Fault Code

Engine intake manifold 1 absolute pressure

What does SPN 3563 mean?

Absolute (boost plus ambient) pressure in the intake manifold, read by the manifold pressure sensor. The ECM compares it with barometric pressure and its boost model to check the sensor and the air path. How urgent it is depends on the FMI after SPN 3563 - pick it below. Check first: key on, engine off: compare manifold absolute pressure with barometric pressure; they should match.

FaultActiveSPN 3563FMI --J1939 engine ECU
SPN 3563
Engine intake manifold 1 absolute pressure
FMI ?
How it failed - the number after the SPN

Can I keep running with it?

Depends on the FMI

How urgent it is depends on the FMI after SPN 3563 - pick it below.

What should I check first?

Key on, engine off: compare manifold absolute pressure with barometric pressure; they should match

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Which FMI shows after SPN 3563?

You'll notice: Intake manifold absolute pressure does not make sense compared with barometric or boost data, so the ECM distrusts it.

Find the number shown after SPN 3563 on your display.

  • 3SPN 3563 FMI 3: Intake manifold pressure circuit reads highShorted highDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5
  • 4SPN 3563 FMI 4: Intake manifold pressure circuit reads lowShorted lowDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5
  • 10SPN 3563 FMI 10: Barometric and intake manifold pressure fail a rationality checkErratic or implausibleDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5
  • 16SPN 3563 FMI 16: Intake manifold pressure is too highReal conditionDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5
  • 18SPN 3563 FMI 18: Intake manifold pressure is lowReal conditionDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5
  • 20SPN 3563 FMI 20: Ambient and manifold pressure difference is lowErratic or implausibleDetroit DD15
  • 21SPN 3563 FMI 21: Ambient and manifold pressure difference is highErratic or implausibleDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5

Checks

0 of 5 done

When to stop

Make the machine safe before you start: on firm level ground, attachments down, key out.

How urgent SPN 3563 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Causes

  • Sensor circuit high or low: wiring open, shorted or corroded at the manifold sensor
  • Barometric sensor or data faulty, so the plausibility check fails
  • Boost leak or restriction that makes the pressure really differ from the expected value
  • Sensor port blocked with oil or soot

Source

Detroit Diesel DD15 2017-2020 fault codes list (Diesel Laptops)

This list names SPN 3563 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.

The source covers: Detroit DD13 and DD15 (2017-2020); same SPN on other J1939 engines.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.