Develon · Fuel system
Develon Wheel loader injectors and misfire (E019-E040) fault codes
Injector circuits and misfire counters for up to eight cylinders on the H-series wheel loader table, plus fuel leakage and fuel valve entries.
Where this code shows
Switch the key on and open the monitor fault or service menu on the gauge panel to see active codes.
What do these codes mean?
Develon codes E019 to E046 are all about the wheel loader injectors and misfire (E019-E040). None needs an immediate stop. Start with this check: find the cylinder number in the code and compare its misfire count with the others.
How urgent are they?
None of the 21 codes here means stop now; all 21 can wait until the shift ends, but find the cause before the next one.
- Check soon21
What should I check first?
Find the cylinder number in the code and compare its misfire count with the others.
Shared checks21 of 21
Stop nowshut down and fix before working onCheck soonfind the cause before the next shiftInfonothing is failing yet
Develon E019Engine Injector Cylinder #01
An injector circuit for the first listed cylinder is not behaving as commanded. The cylinder may run rough or drop out.· OtherOtherCheck soonCauses
- Open or shorted injector wiring
- Faulty injector coil
- Driver fault in the controller
Checks
- 1Check the injector connector for oil and corrosion.
- 2Measure coil resistance against the manual.
- 3Run the cylinder cut-out test.
- 4Inspect the harness for rubbing.
Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins. Meter test
Read the code with the service tool and note which other codes are active with it.
Good: Codes that appear together usually share one cause - start with the wiring they share.
Develon E020Engine Injector Cylinder #02
Same failure as E019 on the engine injector cylinder #02, a different part of the same kind as the engine injector cylinder #01. Specific to this code: the table names it 'Engine Injector Cylinder #02'.· OtherOtherCheck soonCauses
- Fault in the engine injector cylinder #02 or its wiring
- Any cause listed under E019
Checks
- 1Check the engine injector cylinder #02 connector and wiring first, then follow the checks listed under E019.
- 2Clear the code and confirm whether E020 returns on its own.
Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins. Meter test
Read the code with the service tool and note which other codes are active with it.
Good: Codes that appear together usually share one cause - start with the wiring they share.
Develon E021Engine Injector Cylinder #03
Same failure as E019 on the engine injector cylinder #03, a different part of the same kind as the engine injector cylinder #01. Specific to this code: the table names it 'Engine Injector Cylinder #03'.· OtherOtherCheck soonCauses
- Fault in the engine injector cylinder #03 or its wiring
- Any cause listed under E019
Checks
- 1Check the engine injector cylinder #03 connector and wiring first, then follow the checks listed under E019.
- 2Clear the code and confirm whether E021 returns on its own.
Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins. Meter test
Read the code with the service tool and note which other codes are active with it.
Good: Codes that appear together usually share one cause - start with the wiring they share.
Develon E022Engine Injector Cylinder #04
Same failure as E019 on the engine injector cylinder #04, a different part of the same kind as the engine injector cylinder #01. Specific to this code: the table names it 'Engine Injector Cylinder #04'.· OtherOtherCheck soonCauses
- Fault in the engine injector cylinder #04 or its wiring
- Any cause listed under E019
Checks
- 1Check the engine injector cylinder #04 connector and wiring first, then follow the checks listed under E019.
- 2Clear the code and confirm whether E022 returns on its own.
Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins. Meter test
Read the code with the service tool and note which other codes are active with it.
Good: Codes that appear together usually share one cause - start with the wiring they share.
Develon E023Engine Injector Cylinder #05
Same failure as E019 on the engine injector cylinder #05, a different part of the same kind as the engine injector cylinder #01. Specific to this code: the table names it 'Engine Injector Cylinder #05'.· OtherOtherCheck soonCauses
- Fault in the engine injector cylinder #05 or its wiring
- Any cause listed under E019
Checks
- 1Check the engine injector cylinder #05 connector and wiring first, then follow the checks listed under E019.
- 2Clear the code and confirm whether E023 returns on its own.
Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins. Meter test
Read the code with the service tool and note which other codes are active with it.
Good: Codes that appear together usually share one cause - start with the wiring they share.
Develon E024Engine Injector Cylinder #06
Same failure as E019 on the engine injector cylinder #06, a different part of the same kind as the engine injector cylinder #01. Specific to this code: the table names it 'Engine Injector Cylinder #06'.· OtherOtherCheck soonCauses
- Fault in the engine injector cylinder #06 or its wiring
- Any cause listed under E019
Checks
- 1Check the engine injector cylinder #06 connector and wiring first, then follow the checks listed under E019.
- 2Clear the code and confirm whether E024 returns on its own.
Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins. Meter test
Read the code with the service tool and note which other codes are active with it.
Good: Codes that appear together usually share one cause - start with the wiring they share.
Develon E025Engine Injector Cylinder #07
Same failure as E019 on the engine injector cylinder #07, a different part of the same kind as the engine injector cylinder #01. Specific to this code: the table names it 'Engine Injector Cylinder #07'.· OtherOtherCheck soonCauses
- Fault in the engine injector cylinder #07 or its wiring
- Any cause listed under E019
Checks
- 1Check the engine injector cylinder #07 connector and wiring first, then follow the checks listed under E019.
- 2Clear the code and confirm whether E025 returns on its own.
Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins. Meter test
Read the code with the service tool and note which other codes are active with it.
Good: Codes that appear together usually share one cause - start with the wiring they share.
Develon E026Engine Injector Cylinder #08
Same failure as E019 on the engine injector cylinder #08, a different part of the same kind as the engine injector cylinder #01. Specific to this code: the table names it 'Engine Injector Cylinder #08'.· OtherOtherCheck soonCauses
- Fault in the engine injector cylinder #08 or its wiring
- Any cause listed under E019
Checks
- 1Check the engine injector cylinder #08 connector and wiring first, then follow the checks listed under E019.
- 2Clear the code and confirm whether E026 returns on its own.
Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins. Meter test
Read the code with the service tool and note which other codes are active with it.
Good: Codes that appear together usually share one cause - start with the wiring they share.
Develon E030Engine Fuel Leakage 1
Same failure as E019 on the engine fuel leakage 1, a different part of the same kind as the engine injector cylinder #01. Specific to this code: the table names it 'Engine Fuel Leakage 1'.· OtherOtherCheck soonCauses
- Fault in the engine fuel leakage 1 or its wiring
- Any cause listed under E019
Checks
- 1Check the engine fuel leakage 1 connector and wiring first, then follow the checks listed under E019.
- 2Clear the code and confirm whether E030 returns on its own.
Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins. Meter test
Read the code with the service tool and note which other codes are active with it.
Good: Codes that appear together usually share one cause - start with the wiring they share.
Develon E031Engine Misfire for Multiple Cylinders
Same failure as E032 on the engine misfire for multiple cylinders, a different part of the same kind as the engine misfire cylinder #1. Specific to this code: the table names it 'Engine Misfire for Multiple Cylinders'.· OtherOtherCheck soonCauses
- Fault in the engine misfire for multiple cylinders or its wiring
- Any cause listed under E032
Checks
- 1Check the engine misfire for multiple cylinders connector and wiring first, then follow the checks listed under E032.
- 2Clear the code and confirm whether E031 returns on its own.
Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins. Meter test
Read the code with the service tool and note which other codes are active with it.
Good: Codes that appear together usually share one cause - start with the wiring they share.
Develon E032Engine Misfire Cylinder #1
Misfire detected in cylinder 1 on the wheel loader table. It usually feels like rough idle and loss of power.· OtherOtherCheck soonCauses
- Weak or sticking injector
- Poor compression
- Injector wiring fault
- Fuel leak
Checks
- 1Compare misfire counts across cylinders.
- 2Look for fuel leaks.
- 3Check the injector harness.
- 4Check compression if the misfire stays with the cylinder.
Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins. Meter test
Read the code with the service tool and note which other codes are active with it.
Good: Codes that appear together usually share one cause - start with the wiring they share.
Develon E033Engine Misfire Cylinder #2
Same failure as E032 on the engine misfire cylinder #2, a different part of the same kind as the engine misfire cylinder #1. Specific to this code: the table names it 'Engine Misfire Cylinder #2'.· OtherOtherCheck soonCauses
- Fault in the engine misfire cylinder #2 or its wiring
- Any cause listed under E032
Checks
- 1Check the engine misfire cylinder #2 connector and wiring first, then follow the checks listed under E032.
- 2Clear the code and confirm whether E033 returns on its own.
Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins. Meter test
Read the code with the service tool and note which other codes are active with it.
Good: Codes that appear together usually share one cause - start with the wiring they share.
Develon E034Engine Misfire Cylinder #3
Same failure as E032 on the engine misfire cylinder #3, a different part of the same kind as the engine misfire cylinder #1. Specific to this code: the table names it 'Engine Misfire Cylinder #3'.· OtherOtherCheck soonCauses
- Fault in the engine misfire cylinder #3 or its wiring
- Any cause listed under E032
Checks
- 1Check the engine misfire cylinder #3 connector and wiring first, then follow the checks listed under E032.
- 2Clear the code and confirm whether E034 returns on its own.
Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins. Meter test
Read the code with the service tool and note which other codes are active with it.
Good: Codes that appear together usually share one cause - start with the wiring they share.
Develon E035Engine Misfire Cylinder #4
Same failure as E032 on the engine misfire cylinder #4, a different part of the same kind as the engine misfire cylinder #1. Specific to this code: the table names it 'Engine Misfire Cylinder #4'.· OtherOtherCheck soonCauses
- Fault in the engine misfire cylinder #4 or its wiring
- Any cause listed under E032
Checks
- 1Check the engine misfire cylinder #4 connector and wiring first, then follow the checks listed under E032.
- 2Clear the code and confirm whether E035 returns on its own.
Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins. Meter test
Read the code with the service tool and note which other codes are active with it.
Good: Codes that appear together usually share one cause - start with the wiring they share.
Develon E036Engine Misfire Cylinder #5
Same failure as E032 on the engine misfire cylinder #5, a different part of the same kind as the engine misfire cylinder #1. Specific to this code: the table names it 'Engine Misfire Cylinder #5'.· OtherOtherCheck soonCauses
- Fault in the engine misfire cylinder #5 or its wiring
- Any cause listed under E032
Checks
- 1Check the engine misfire cylinder #5 connector and wiring first, then follow the checks listed under E032.
- 2Clear the code and confirm whether E036 returns on its own.
Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins. Meter test
Read the code with the service tool and note which other codes are active with it.
Good: Codes that appear together usually share one cause - start with the wiring they share.
Develon E037Engine Misfire Cylinder #6
Same failure as E032 on the engine misfire cylinder #6, a different part of the same kind as the engine misfire cylinder #1. Specific to this code: the table names it 'Engine Misfire Cylinder #6'.· OtherOtherCheck soonCauses
- Fault in the engine misfire cylinder #6 or its wiring
- Any cause listed under E032
Checks
- 1Check the engine misfire cylinder #6 connector and wiring first, then follow the checks listed under E032.
- 2Clear the code and confirm whether E037 returns on its own.
Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins. Meter test
Read the code with the service tool and note which other codes are active with it.
Good: Codes that appear together usually share one cause - start with the wiring they share.
Develon E038Engine Misfire Cylinder #7
Same failure as E032 on the engine misfire cylinder #7, a different part of the same kind as the engine misfire cylinder #1. Specific to this code: the table names it 'Engine Misfire Cylinder #7'.· OtherOtherCheck soonCauses
- Fault in the engine misfire cylinder #7 or its wiring
- Any cause listed under E032
Checks
- 1Check the engine misfire cylinder #7 connector and wiring first, then follow the checks listed under E032.
- 2Clear the code and confirm whether E038 returns on its own.
Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins. Meter test
Read the code with the service tool and note which other codes are active with it.
Good: Codes that appear together usually share one cause - start with the wiring they share.
Develon E039Engine Misfire Cylinder #8
Same failure as E032 on the engine misfire cylinder #8, a different part of the same kind as the engine misfire cylinder #1. Specific to this code: the table names it 'Engine Misfire Cylinder #8'.· OtherOtherCheck soonCauses
- Fault in the engine misfire cylinder #8 or its wiring
- Any cause listed under E032
Checks
- 1Check the engine misfire cylinder #8 connector and wiring first, then follow the checks listed under E032.
- 2Clear the code and confirm whether E039 returns on its own.
Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins. Meter test
Read the code with the service tool and note which other codes are active with it.
Good: Codes that appear together usually share one cause - start with the wiring they share.
Develon E040Engine Fuel Valve 1 Position
Same failure as E019 on the engine fuel valve 1 position, a different part of the same kind as the engine injector cylinder #01. Specific to this code: the table names it 'Engine Fuel Valve 1 Position'.· OtherOtherCheck soonCauses
- Fault in the engine fuel valve 1 position or its wiring
- Any cause listed under E019
Checks
- 1Check the engine fuel valve 1 position connector and wiring first, then follow the checks listed under E019.
- 2Clear the code and confirm whether E040 returns on its own.
Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins. Meter test
Read the code with the service tool and note which other codes are active with it.
Good: Codes that appear together usually share one cause - start with the wiring they share.
Develon E045Engine Injector Group 1
Same failure as E019 on the engine injector group 1, a different part of the same kind as the engine injector cylinder #01. Specific to this code: the table names it 'Engine Injector Group 1'.· OtherOtherCheck soonCauses
- Fault in the engine injector group 1 or its wiring
- Any cause listed under E019
Checks
- 1Check the engine injector group 1 connector and wiring first, then follow the checks listed under E019.
- 2Clear the code and confirm whether E045 returns on its own.
Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins. Meter test
Read the code with the service tool and note which other codes are active with it.
Good: Codes that appear together usually share one cause - start with the wiring they share.
Develon E046Engine Injector Group 2
Same failure as E019 on the engine injector group 2, a different part of the same kind as the engine injector cylinder #01. Specific to this code: the table names it 'Engine Injector Group 2'.· OtherOtherCheck soonCauses
- Fault in the engine injector group 2 or its wiring
- Any cause listed under E019
Checks
- 1Check the engine injector group 2 connector and wiring first, then follow the checks listed under E019.
- 2Clear the code and confirm whether E046 returns on its own.
Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins. Meter test
Read the code with the service tool and note which other codes are active with it.
Good: Codes that appear together usually share one cause - start with the wiring they share.
Shared checks
Checks, in order
- 1Find the cylinder number in the code and compare its misfire count with the others.
- 2Inspect injector harness and connector and note what you find before replacing any part.
- 3Check for fuel leaks and return flow and note what you find before replacing any part.
- 4Run the cylinder cut-out test if available and note what you find before replacing any part.
Causes
- Injector or wiring fault
- Weak or sticking injector
- Fuel leak
When to stop
You'll notice: Rough running, loss of power or smoke; the code names the cylinder.
Common-rail fuel runs at very high pressure. Never open a high-pressure line or fitting with the engine running or just after it stops - a fine fuel jet can pierce skin.
Each code above shows its own urgency. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Related on Equipments Finder
Sources
Codes and meanings come from the sources above; short titles shorten the standard J1939 wording. Failure types, checks, meter tests and drawings are general workshop guidance, not the maker's. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
