EF Logo

Develon · Engine sensors

Develon Wheel loader engine codes (E001-E043) fault codes

The H-series wheel loader table lists engine faults as three-digit E codes that follow common truck-engine data: throttle, fuel, oil, boost, coolant, battery, speed, position, starter and fan items. The codes come from the engine controller over the data link.

FaultCheckE001Develon · Wheel loader engine codes (E001-E043)
Code shows hereFAULTE001

Where this code shows

Switch the key on and open the monitor fault or service menu on the gauge panel to see active codes.

What do these codes mean?

Develon codes E001 to E043 are all about the wheel loader engine codes (E001-E043). None needs an immediate stop. Start with this check: read the live value for the named item with the diagnostic tool.

How urgent are they?

None of the 24 codes here means stop now; all 24 can wait until the shift ends, but find the cause before the next one.

  • Check soon24

What should I check first?

Read the live value for the named item with the diagnostic tool.

Shared checks

24 of 24

Stop nowshut down and fix before working onCheck soonfind the cause before the next shiftInfonothing is failing yet

  • Develon E001Engine Throttle Position

    Same failure as E004 on the engine throttle position, a different part of the same kind as the engine oil pressure.· Other
    Check soon

    Causes

    • Fault in the engine throttle position or its wiring
    • Any cause listed under E004

    Checks

    1. 1Check the engine throttle position connector and wiring first, then follow the checks listed under E004.
    2. 2Clear the code and confirm whether E001 returns on its own.
    ControllerPartSupplySignalGround
    Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins.

    Meter test

    Read the code with the service tool and note which other codes are active with it.

    Good: Codes that appear together usually share one cause - start with the wiring they share.

  • Develon E002Engine Fuel Delivery Pressure

    Same failure as E004 on the engine fuel delivery pressure, a different part of the same kind as the engine oil pressure.· Other
    Check soon

    Causes

    • Fault in the engine fuel delivery pressure or its wiring
    • Any cause listed under E004

    Checks

    1. 1Check the engine fuel delivery pressure connector and wiring first, then follow the checks listed under E004.
    2. 2Clear the code and confirm whether E002 returns on its own.
    ControllerPartSupplySignalGround
    Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins.

    Meter test

    Read the code with the service tool and note which other codes are active with it.

    Good: Codes that appear together usually share one cause - start with the wiring they share.

  • Develon E003Engine Oil Level

    Same failure as E004 on the engine oil level, a different part of the same kind as the engine oil pressure.· Other
    Check soon

    Causes

    • Fault in the engine oil level or its wiring
    • Any cause listed under E004

    Checks

    1. 1Check the engine oil level connector and wiring first, then follow the checks listed under E004.
    2. 2Clear the code and confirm whether E003 returns on its own.
    ControllerPartSupplySignalGround
    Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins.

    Meter test

    Read the code with the service tool and note which other codes are active with it.

    Good: Codes that appear together usually share one cause - start with the wiring they share.

  • Develon E004Engine Oil Pressure

    The engine oil pressure signal on the wheel loader table.· Other
    Check soon

    Causes

    • Failed sensor
    • Lost 5 V supply or ground
    • Wiring fault
    • Real low oil pressure

    Checks

    1. 1Check the oil level first.
    2. 2Check supply and ground at the sensor.
    3. 3Read the live value within the 0.5-4.5 V range.
    4. 4Confirm real pressure with a mechanical gauge if low.
    ControllerPartSupplySignalGround
    Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins.

    Meter test

    Read the code with the service tool and note which other codes are active with it.

    Good: Codes that appear together usually share one cause - start with the wiring they share.

  • Develon E005Engine Intake Manifold #1 Pressure

    Same failure as E004 on the engine intake manifold #1 pressure, a different part of the same kind as the engine oil pressure.· Other
    Check soon

    Causes

    • Fault in the engine intake manifold #1 pressure or its wiring
    • Any cause listed under E004

    Checks

    1. 1Check the engine intake manifold #1 pressure connector and wiring first, then follow the checks listed under E004.
    2. 2Clear the code and confirm whether E005 returns on its own.
    ControllerPartSupplySignalGround
    Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins.

    Meter test

    Read the code with the service tool and note which other codes are active with it.

    Good: Codes that appear together usually share one cause - start with the wiring they share.

  • Develon E006Engine Intake Manifold 1 Temperature

    The intake manifold temperature signal on the wheel loader table.· Other
    Check soon

    Causes

    • Failed temperature sensor
    • Open or shorted wire
    • Corroded connector

    Checks

    1. 1Measure the sensor resistance against the manual curve.
    2. 2Compare the reading with ambient when the engine is cold.
    3. 3Inspect the wiring and connector.
    4. 4Check for heat damage near the manifold.
    ControllerPartSupplySignalGround
    Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins.

    Meter test

    Read the code with the service tool and note which other codes are active with it.

    Good: Codes that appear together usually share one cause - start with the wiring they share.

  • Develon E007Engine Air Filter 1 Differential Pressure

    Same failure as E004 on the engine air filter 1 differential pressure, a different part of the same kind as the engine oil pressure.· Other
    Check soon

    Causes

    • Fault in the engine air filter 1 differential pressure or its wiring
    • Any cause listed under E004

    Checks

    1. 1Check the engine air filter 1 differential pressure connector and wiring first, then follow the checks listed under E004.
    2. 2Clear the code and confirm whether E007 returns on its own.
    ControllerPartSupplySignalGround
    Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins.

    Meter test

    Read the code with the service tool and note which other codes are active with it.

    Good: Codes that appear together usually share one cause - start with the wiring they share.

  • Develon E008Barometric Pressure

    Same failure as E004 on the barometric pressure, a different part of the same kind as the engine oil pressure.· Other
    Check soon

    Causes

    • Fault in the barometric pressure or its wiring
    • Any cause listed under E004

    Checks

    1. 1Check the barometric pressure connector and wiring first, then follow the checks listed under E004.
    2. 2Clear the code and confirm whether E008 returns on its own.
    ControllerPartSupplySignalGround
    Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins.

    Meter test

    Read the code with the service tool and note which other codes are active with it.

    Good: Codes that appear together usually share one cause - start with the wiring they share.

  • Develon E009Engine Coolant Temperature

    Same failure as E006 on the engine coolant temperature, a different part of the same kind as the engine intake manifold 1 temperature.· Other
    Check soon

    Causes

    • Fault in the engine coolant temperature or its wiring
    • Any cause listed under E006

    Checks

    1. 1Check the engine coolant temperature connector and wiring first, then follow the checks listed under E006.
    2. 2Clear the code and confirm whether E009 returns on its own.
    ControllerPartSupplySignalGround
    Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins.

    Meter test

    Read the code with the service tool and note which other codes are active with it.

    Good: Codes that appear together usually share one cause - start with the wiring they share.

  • Develon E010Engine Coolant Level

    Same failure as E004 on the engine coolant level, a different part of the same kind as the engine oil pressure.· Other
    Check soon

    Causes

    • Fault in the engine coolant level or its wiring
    • Any cause listed under E004

    Checks

    1. 1Check the engine coolant level connector and wiring first, then follow the checks listed under E004.
    2. 2Clear the code and confirm whether E010 returns on its own.
    ControllerPartSupplySignalGround
    Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins.

    Meter test

    Read the code with the service tool and note which other codes are active with it.

    Good: Codes that appear together usually share one cause - start with the wiring they share.

  • Develon E011Engine Injector Timing Rail 1 Pressure

    Same failure as E004 on the engine injector timing rail 1 pressure, a different part of the same kind as the engine oil pressure.· Other
    Check soon

    Causes

    • Fault in the engine injector timing rail 1 pressure or its wiring
    • Any cause listed under E004

    Checks

    1. 1Check the engine injector timing rail 1 pressure connector and wiring first, then follow the checks listed under E004.
    2. 2Clear the code and confirm whether E011 returns on its own.
    ControllerPartSupplySignalGround
    Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins.

    Meter test

    Read the code with the service tool and note which other codes are active with it.

    Good: Codes that appear together usually share one cause - start with the wiring they share.

  • Develon E012Charging System Potential (Voltage)

    Same failure as E004 on the charging system potential (voltage), a different part of the same kind as the engine oil pressure.· Other
    Check soon

    Causes

    • Fault in the charging system potential (voltage) or its wiring
    • Any cause listed under E004

    Checks

    1. 1Check the charging system potential (voltage) connector and wiring first, then follow the checks listed under E004.
    2. 2Clear the code and confirm whether E012 returns on its own.
    ControllerPartSupplySignalGround
    Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins.

    Meter test

    Read the code with the service tool and note which other codes are active with it.

    Good: Codes that appear together usually share one cause - start with the wiring they share.

  • Develon E013Battery Potential / Power Input 1

    Same failure as E004 on the battery potential / power input 1, a different part of the same kind as the engine oil pressure.· Other
    Check soon

    Causes

    • Fault in the battery potential / power input 1 or its wiring
    • Any cause listed under E004

    Checks

    1. 1Check the battery potential / power input 1 connector and wiring first, then follow the checks listed under E004.
    2. 2Clear the code and confirm whether E013 returns on its own.
    ControllerPartSupplySignalGround
    Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins.

    Meter test

    Read the code with the service tool and note which other codes are active with it.

    Good: Codes that appear together usually share one cause - start with the wiring they share.

  • Develon E014Ambient Air Temperature

    Same failure as E006 on the ambient air temperature, a different part of the same kind as the engine intake manifold 1 temperature.· Other
    Check soon

    Causes

    • Fault in the ambient air temperature or its wiring
    • Any cause listed under E006

    Checks

    1. 1Check the ambient air temperature connector and wiring first, then follow the checks listed under E006.
    2. 2Clear the code and confirm whether E014 returns on its own.
    ControllerPartSupplySignalGround
    Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins.

    Meter test

    Read the code with the service tool and note which other codes are active with it.

    Good: Codes that appear together usually share one cause - start with the wiring they share.

  • Develon E015Engine Speed

    Same failure as E004 on the engine speed, a different part of the same kind as the engine oil pressure.· Other
    Check soon

    Causes

    • Fault in the engine speed or its wiring
    • Any cause listed under E004

    Checks

    1. 1Check the engine speed connector and wiring first, then follow the checks listed under E004.
    2. 2Clear the code and confirm whether E015 returns on its own.
    ControllerPartSupplySignalGround
    Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins.

    Meter test

    Read the code with the service tool and note which other codes are active with it.

    Good: Codes that appear together usually share one cause - start with the wiring they share.

  • Develon E016Accelerator Pedal Kickdown Switch

    Same failure as E004 on the accelerator pedal kickdown switch, a different part of the same kind as the engine oil pressure.· Other
    Check soon

    Causes

    • Fault in the accelerator pedal kickdown switch or its wiring
    • Any cause listed under E004

    Checks

    1. 1Check the accelerator pedal kickdown switch connector and wiring first, then follow the checks listed under E004.
    2. 2Clear the code and confirm whether E016 returns on its own.
    ControllerPartSupplySignalGround
    Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins.

    Meter test

    Read the code with the service tool and note which other codes are active with it.

    Good: Codes that appear together usually share one cause - start with the wiring they share.

  • Develon E017Engine Idle Shutdown Timer State

    Same failure as E004 on the engine idle shutdown timer state, a different part of the same kind as the engine oil pressure.· Other
    Check soon

    Causes

    • Fault in the engine idle shutdown timer state or its wiring
    • Any cause listed under E004

    Checks

    1. 1Check the engine idle shutdown timer state connector and wiring first, then follow the checks listed under E004.
    2. 2Clear the code and confirm whether E017 returns on its own.
    ControllerPartSupplySignalGround
    Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins.

    Meter test

    Read the code with the service tool and note which other codes are active with it.

    Good: Codes that appear together usually share one cause - start with the wiring they share.

  • Develon E018Engine Position Sensor

    Same failure as E004 on the engine position sensor, a different part of the same kind as the engine oil pressure.· Other
    Check soon

    Causes

    • Fault in the engine position sensor or its wiring
    • Any cause listed under E004

    Checks

    1. 1Check the engine position sensor connector and wiring first, then follow the checks listed under E004.
    2. 2Clear the code and confirm whether E018 returns on its own.
    ControllerPartSupplySignalGround
    Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins.

    Meter test

    Read the code with the service tool and note which other codes are active with it.

    Good: Codes that appear together usually share one cause - start with the wiring they share.

  • Develon E027Engine Starter Motor Relay

    Same failure as E029 on the engine starter motor relay, a different part of the same kind as the engine protection system has shutdown engine.· Other
    Check soon

    Causes

    • Fault in the engine starter motor relay or its wiring
    • Any cause listed under E029

    Checks

    1. 1Check the engine starter motor relay connector and wiring first, then follow the checks listed under E029.
    2. 2Clear the code and confirm whether E027 returns on its own.
    ControllerPartSupplySignalGround
    Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins.

    Meter test

    Read the code with the service tool and note which other codes are active with it.

    Good: Codes that appear together usually share one cause - start with the wiring they share.

  • Develon E028Requested Percent Fan Speed

    Same failure as E029 on the requested percent fan speed, a different part of the same kind as the engine protection system has shutdown engine.· Other
    Check soon

    Causes

    • Fault in the requested percent fan speed or its wiring
    • Any cause listed under E029

    Checks

    1. 1Check the requested percent fan speed connector and wiring first, then follow the checks listed under E029.
    2. 2Clear the code and confirm whether E028 returns on its own.
    ControllerPartSupplySignalGround
    Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins.

    Meter test

    Read the code with the service tool and note which other codes are active with it.

    Good: Codes that appear together usually share one cause - start with the wiring they share.

  • Develon E029Engine Protection System has Shutdown Engine

    The engine protection system has shut down the engine.· Real condition
    Check soon

    Causes

    • A real over-limit condition
    • Faulty sensor or switch feeding the protection
    • Wiring fault

    Checks

    1. 1Read other codes logged at the same time to find the trigger.
    2. 2Check oil level, coolant level and load.
    3. 3Inspect sensor wiring for the likely trigger.
    4. 4Clear the code and watch the live values.
    allowed rangetime
    The reading against the band the controller allows.

    Meter test

    Check the real value with a separate gauge or thermometer before blaming the sensor.

    Good: If the gauge agrees with the display, fix the machine, not the sensor.

  • Develon E041Source Address of Controlling Device for Engine Control

    Same failure as E029 on the source address of controlling device for engine control, a different part of the same kind as the engine protection system has shutdown engine.· Other
    Check soon

    Causes

    • Fault in the source address of controlling device for engine control or its wiring
    • Any cause listed under E029

    Checks

    1. 1Check the source address of controlling device for engine control connector and wiring first, then follow the checks listed under E029.
    2. 2Clear the code and confirm whether E041 returns on its own.
    ControllerPartSupplySignalGround
    Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins.

    Meter test

    Read the code with the service tool and note which other codes are active with it.

    Good: Codes that appear together usually share one cause - start with the wiring they share.

  • Develon E042Engine Torque Limit Feature

    Same failure as E029 on the engine torque limit feature, a different part of the same kind as the engine protection system has shutdown engine.· Other
    Check soon

    Causes

    • Fault in the engine torque limit feature or its wiring
    • Any cause listed under E029

    Checks

    1. 1Check the engine torque limit feature connector and wiring first, then follow the checks listed under E029.
    2. 2Clear the code and confirm whether E042 returns on its own.
    ControllerPartSupplySignalGround
    Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins.

    Meter test

    Read the code with the service tool and note which other codes are active with it.

    Good: Codes that appear together usually share one cause - start with the wiring they share.

  • Develon E043Fan Speed

    Same failure as E029 on the fan speed, a different part of the same kind as the engine protection system has shutdown engine.· Other
    Check soon

    Causes

    • Fault in the fan speed or its wiring
    • Any cause listed under E029

    Checks

    1. 1Check the fan speed connector and wiring first, then follow the checks listed under E029.
    2. 2Clear the code and confirm whether E043 returns on its own.
    ControllerPartSupplySignalGround
    Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins.

    Meter test

    Read the code with the service tool and note which other codes are active with it.

    Good: Codes that appear together usually share one cause - start with the wiring they share.

Shared checks

Checks, in order

  1. 1Read the live value for the named item with the diagnostic tool.
  2. 2Check the connector and harness for that item.
  3. 3Check battery voltage and engine base condition (oil, coolant, air, fuel).
  4. 4Look for other codes logged at the same time.

Causes

  • Sensor or wiring fault named in the code
  • Real engine condition out of range
  • Poor battery voltage
  • CAN data problem from the engine controller

When to stop

You'll notice: The engine warning lamp may light and power may be limited; the monitor shows the E code.

Let the engine cool before opening the cooling system; a hot cap releases scalding coolant. Running on with an overheat warning risks a head gasket or seized engine.

Each code above shows its own urgency. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Sources

Codes and meanings come from the sources above; short titles shorten the standard J1939 wording. Failure types, checks, meter tests and drawings are general workshop guidance, not the maker's. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.