Volvo/Mack · MID 136 brake ECU (ABS)
Volvo/Mack Fault Code MID 136 SID 66 FMI 7
ABS - mechanical system not responding (can set with no fault)
What does Volvo/Mack code MID 136 SID 66 FMI 7 mean?
The brake ECU (ABS) sets this code on some Volvo VN, VHD, VT and VAH trucks built 2010 to 2014 and on Mack trucks, without any failed part. A threshold setting in the ABS ECU software is behind it. Urgency: check soon - the machine may derate or limit a function. Check first: check that no other ABS codes are active and the wheel speed sensors read correctly.
- MID 136
- Which control unit reports it
- SID 66
- Component at fault
- FMI 7
- Mechanical system not responding
Can I keep running with it?
Check soon
The machine may derate or limit a function. Find the cause before the next shift.
What should I check first?
Check that no other ABS codes are active and the wheel speed sensors read correctly
Then 4 more checksWhere to read it
Connect the Premium Tech Tool or a J1939/J1587 scan tool to the diagnostic socket and read the codes for every module, not only the engine.
Checks
0 of 5 done
Causes
- ABS ECU threshold setting in old software
- A real wheel speed sensor or valve fault, so rule it out first
- Old Bendix configuration file after a calibration
How it failed
You'll notice: ABS lamp comes on.
Part or controllerRead from FMI 7: mechanical system not responding
The controller reports a part, module or its software as faulty or not responding.
- Meter test
- Check power and ground at the module connector with the key on, then its fuses.
- Good result
- Battery voltage on power, under 0.2 V drop on ground. Then it needs the service tool.
When to stop
Brake and steering faults are a safety issue on site. Chock the machine and keep it parked until the fault is found and the brakes are tested.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Related on Equipments Finder
Source
This source lists MID 136 SID 66 FMI 7 and its meaning. The guidance on this page is general, not taken from it.
The source covers: Volvo VN, VHD, VT and VAH built Jan 2010 - Nov 2014 with basic ESP package; Mack trucks with ABS (Mack solution CBR-407).
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
