EF Logo

J1939 · Aftertreatment - SCR/DEF

SPN 4364 FMI 1

SCR NOx conversion efficiency very low

What does SPN 4364 FMI 1 mean?

The SCR is removing very little NOx, the most severe level. The ECM can derate and then limit road speed until the cause is fixed. Urgency: stop now - shut down and fix before working on. Check first: check the DEF level and add DEF if the tank is low.

FaultStopSPN 4364FMI 1J1939 engine ECU
FMI 1
Data below normal, most severe

Can I keep running with it?

Stop now

Shut down and fix before working on. Running on risks damage or the machine locks out.

What should I check first?

Check the DEF level and add DEF if the tank is low

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Checks

0 of 5 done

Causes

  • No DEF being injected because the tank is empty or the pump has failed
  • Wrong liquid in the DEF tank
  • Failed or contaminated catalyst
  • Blocked dosing valve or frozen DEF line

How it failed

You'll notice: The SCR removes very little NOx, the most severe level, so the ECM derates and then limits road speed until the cause is fixed; the SCR lamp is on.

Real conditionRead from FMI 1: data below normal, most severe

The sensor reading is valid but outside the allowed range - the problem may be real.

allowed rangetime
The reading against the band the controller allows.
Meter test
Check the real value with a separate gauge or thermometer before blaming the sensor.
Good result
If the gauge agrees with the display, fix the machine, not the sensor.

When to stop

Tilt, load and interlock cutouts are what keep a lift or telehandler from tipping. Never bypass or bridge one to keep working; get the fault found before anyone goes up or lifts again.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Source

Detroit Diesel DD15 2017-2020 fault codes list (Diesel Laptops)

This list shows SPN 4364 with FMI 1. The guidance on this page is general, not taken from it.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.