EF Logo

J1939 · Aftertreatment - SCR/DEF

SPN 4334 Fault Code

Aftertreatment 1 diesel exhaust fluid dosing absolute pressure

What does SPN 4334 mean?

Pressure of the DEF in the dosing line, read by a pressure sensor in the dosing unit. The control uses it to regulate the pump and judge dosing. How urgent it is depends on the FMI after SPN 4334 - pick it below. Check first: compare the DEF pressure with the commanded pressure when the pump primes; a full-scale value means a circuit fault.

FaultActiveSPN 4334FMI --J1939 engine ECU
SPN 4334
Aftertreatment 1 diesel exhaust fluid dosing absolute pressure
FMI ?
How it failed - the number after the SPN

Can I keep running with it?

Depends on the FMI

How urgent it is depends on the FMI after SPN 4334 - pick it below.

What should I check first?

Compare the DEF pressure with the commanded pressure when the pump primes; a full-scale value means a circuit fault

Then 3 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Which FMI shows after SPN 4334?

You'll notice: DEF pressure is misread, so the ECM cannot regulate the DEF pump or confirm the dosing pressure, and a derate or an inducement warning can follow.

Find the number shown after SPN 4334 on your display. 2 of them have their own page with causes and checks.

Checks

0 of 4 done

When to stop

Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.

How urgent SPN 4334 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Causes

  • Signal high or open: broken or backed-out pin, an open sensor return, or the signal shorted to the 5 V reference at the DEF pressure sensor
  • Signal low or shorted: signal wire grounded, or the 5 V reference lost, so the DEF pressure sensor reads at the bottom of its range
  • Real condition: pump worn or frozen DEF lines giving real pressure outside range
  • Real condition: blocked DEF filter or doser causing a real pressure error
1 more cause
  • Sensor: dEF crystals partly blocking the sensor port, making the pressure reading jump

Source

Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)

This list names SPN 4334 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.

The source covers: Cummins ISX15 (2013-2018) and X15; same SPN on other J1939 engines.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.