J1939 · Aftertreatment - SCR/DEF
SPN 3226 FMI 10
Outlet NOx sensor abnormal rate of change
What does SPN 3226 FMI 10 mean?
The outlet NOx sensor reading is changing faster than the engine could produce. The ECM cannot trust it for SCR checks and may set a derate. Urgency: check soon - the machine may derate or limit a function. Check first: log the outlet NOx at a steady load and look for spikes that do not follow the intake NOx.
- SPN 3226
- Aftertreatment 1 outlet NOx
- FMI 10
- Abnormal rate of change
Can I keep running with it?
Check soon
The machine may derate or limit a function. Find the cause before the next shift.
What should I check first?
Log the outlet NOx at a steady load and look for spikes that do not follow the intake NOx
Then 4 more checksWhere to read it
Connect a J1939-capable scan tool to the 9-pin diagnostic port.
Checks
0 of 5 done
Causes
- Outlet NOx sensor element worn or soot-coated, so its output jumps with each pressure pulse
- Sensor lead damaged near the tailpipe, giving intermittent signal changes as the exhaust flexes
- Exhaust leak at the sensor boss pulling in air, which the sensor reads as sudden NOx changes
- Poor contact in the sensor module plug from heat cycles
How it failed
You'll notice: The outlet NOx sensor value moves faster than the engine could really change it, so the ECM cannot trust the downstream reading for SCR checks and may set a derate and an efficiency fault.
Erratic or implausibleRead from FMI 10: abnormal rate of change
The reading jumps, drifts or disagrees with the sensors around it.
- Meter test
- Watch the live value on the service tool while you flex the harness and tap the connector.
- Good result
- A steady value that tracks the real condition. A jump while flexing is the loose pin or wire.
When to stop
Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Other SPN 3226 codes
Source
Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)
This list shows SPN 3226 with FMI 10. The guidance on this page is general, not taken from it.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
