EF Logo

J1939 · Sensors

SPN 171 Fault Code

Ambient air temperature

What does SPN 171 mean?

Outside air temperature, read by a sensor on the cab or bumper or received over the data link. The ECM and aftertreatment controls use it for cold-start, DEF heating and regeneration decisions. How urgent it is depends on the FMI after SPN 171 - pick it below. Check first: compare the reading with the real outside temperature on a cold-soaked machine; large offsets point to the sensor or its wiring.

FaultActiveSPN 171FMI --J1939 engine ECU
SPN 171
Ambient air temperature
FMI ?
How it failed - the number after the SPN

Can I keep running with it?

Depends on the FMI

How urgent it is depends on the FMI after SPN 171 - pick it below.

What should I check first?

Compare the reading with the real outside temperature on a cold-soaked machine; large offsets point to the sensor or its wiring

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Which FMI shows after SPN 171?

You'll notice: Outside temperature on the dash reads wrong or shows dashes, and the ECM may delay cold-start aids or fan strategy.

Find the number shown after SPN 171 on your display. 2 of them have their own page with causes and checks.

Checks

0 of 5 done

When to stop

Let the engine cool before opening the cooling system; a hot cap releases scalding coolant. Running on with an overheat warning risks a head gasket or seized engine.

How urgent SPN 171 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Causes

  • Reads cold: an open circuit or a short to supply in the ambient air temperature sensor wiring, which the ECM reads as an extremely low temperature
  • Reads hot: signal wire shorted to ground or the ambient air temperature sensor element shorted, which the ECM reads as an extremely high temperature
  • Real condition: sensor mounted where engine heat or radiator air biases the reading
  • Real condition: wrong sensor fitted after bumper or grille work
1 more cause
  • Sensor: sun or radiator heat soaking the sensor so the reading drifts upward while parked

Source

Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)

This list names SPN 171 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.

The source covers: Cummins ISX15 (2013-2018) and X15; same SPN on other J1939 engines.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.