EF Logo

J1939 · Sensors

SPN 171 FMI 4

Ambient air temperature sensor voltage low

What does SPN 171 FMI 4 mean?

The ambient air temperature sensor signal reads below its valid range, which the ECM sees as a short to ground or a lost supply. Urgency: information - a reminder or status message. Check first: key on, engine off: read the ambient air temperature sensor in the service tool; an impossibly hot reading on a cold machine means the ECM sees a short to ground.

FaultInfoSPN 171FMI 4J1939 engine ECU
FMI 4
Voltage below normal or shorted low

Can I keep running with it?

Information

A reminder or status message. Nothing is failing yet.

What should I check first?

Key on, engine off: read the ambient air temperature sensor in the service tool; an impossibly hot reading on a cold machine means the ECM sees a short to ground

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Checks

0 of 5 done

Causes

  • Signal wire shorted to ground, which reads as an extremely hot temperature
  • Signal and return wires shorted together, or the ambient air temperature sensor element shorted internally
  • Harness chafed at the front grille or bumper mount
  • Sensor plug full of road salt and water
1 more cause
  • Wires crushed under a bracket after a repair

How it failed

You'll notice: Outside temperature on the dash reads wrong or shows dashes, and the ECM may delay cold-start aids or fan strategy.

Shorted lowRead from FMI 4: voltage below normal or shorted low

The signal sits at or near zero volts - less than a working sensor can send.

ControllerPartSupplySignalGround
Typical three-wire sensor or two-wire coil. Your wiring diagram has the real pins.
Meter test
Key off, unplug both ends. Measure resistance from the signal wire to ground and to the machine frame.
Good result
Open circuit (OL) to ground. A low reading means chafed insulation touching metal.

When to stop

Let the engine cool before opening the cooling system; a hot cap releases scalding coolant. Running on with an overheat warning risks a head gasket or seized engine.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Source

Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)

This list shows SPN 171 with FMI 4. The guidance on this page is general, not taken from it.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.