EF Logo

Genie · Engine faults (Deutz TD 2.9, SPN/FMI)

Genie Fault Code SPN 110 / FMI 0

High coolant temperature

What does Genie code SPN 110 / FMI 0 mean?

Coolant temperature is above the warning or shut-off threshold. The engine derates and may shut down, and the coolant temperature warning lamp comes on. Urgency: stop now - shut down and fix before working on. Check first: check the coolant level when the engine is cool and look for leaks at hoses, radiator and water pump.

FaultStopSPN 110FMI 0Genie · Engine faults (Deutz TD 2.9, SPN/FMI)

Can I keep running with it?

Stop now

Shut down and fix before working on. Running on risks damage or the machine locks out.

What should I check first?

Check the coolant level when the engine is cool and look for leaks at hoses, radiator and water pump.

Then 4 more checks
Stored in the engine ECUFAULTSPN 110FMI 0

Where this code shows

Scissors: read the code on the platform LED display or the ground control LCD.

Checks

0 of 5 done

Causes

  • Low coolant level or a leak
  • Blocked radiator or charge air cooler fins
  • Fan drive or belt fault
  • Thermostat stuck closed

How it failed

You'll notice: The engine derates and may shut down, and the coolant temperature lamp comes on.

Real conditionRead from FMI 0: data above normal, most severe

The sensor reading is valid but outside the allowed range - the problem may be real.

allowed rangetime
The reading against the band the controller allows.
Meter test
Check the real value with a separate gauge or thermometer before blaming the sensor.
Good result
If the gauge agrees with the display, fix the machine, not the sensor.

When to stop

Let the engine cool before opening the cooling system; a hot cap releases scalding coolant. Running on with an overheat warning risks a head gasket or seized engine.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Same part, other failures: Deutz engine faults (SPN/FMI)

Source

Genie GTH-5519 (Deutz Tier 4i) Service and Repair Manual 1272852, Section 4 Fault Codes

This source lists SPN 110 / FMI 0 and its meaning. The guidance on this page is general, not taken from it.

The source covers: Genie GTH-5519 telehandler, Deutz Tier 4i (from serial GTH5514B-101).

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.