EF Logo

Bobcat · Engine starting

Bobcat Fault Code 22‑03

Starter error OFF

What does Bobcat code 22-03 mean?

The controller sees the starter output not energised when it has commanded it on. The engine may not crank, or the starter may stay energised. Urgency: check soon - the machine may derate or limit a function. Check first: check for a sticking starter solenoid or a worn starter drawing too much current, which can make the coil draw wrongly.

FaultCheck22-03Bobcat · Engine starting

Can I keep running with it?

Check soon

The machine may derate or limit a function. Find the cause before the next shift.

What should I check first?

Check for a sticking starter solenoid or a worn starter drawing too much current, which can make the coil draw wrongly

Then 5 more checks
Code shows hereFAULT22-03

Where this code shows

On touchscreen R-series machines, touch the screen and pick Service Codes from the menu.

Checks

0 of 6 done

Causes

  • Starter solenoid or motor drawing abnormal current
  • Output driver not switching
  • Open coil
  • Broken wire or loose plug
1 more cause
  • Blown fuse on the starter output feed

How it failed

You'll notice: The controller sees the starter output not energised when it has asked for it.

OtherRead from how the source describes the code

The source does not say how this one failed.

Meter test
Read the code with the service tool and note which other codes are active with it.
Good result
Codes that appear together usually share one cause - start with the wiring they share.

When to stop

Most sensor and wiring faults can be traced with a multimeter and the wiring diagram. Disconnect the battery before unplugging controllers; if the controller itself is suspect or needs programming, that needs the dealer’s service tool.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Same part, other failures: Glow plugs, starter and keyless start

Show the other 24 codes
All 33 Glow plugs, starter and keyless start codes on one page

Source

Bobcat S205 Operation & Maintenance Manual, service codes list

This source lists 22-03 and its meaning. The guidance on this page is general, not taken from it.

The source covers: Older Bobcat skid-steer and track loaders using the two-digit service codes (S205 manual, similar models).

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.