Bobcat · Hydraulics
Bobcat Fault Code 07‑10
Hydraulic oil temperature high
What does Bobcat code 07-10 mean?
Hydraulic oil is running hot. Ease off the work and let the machine cool while you look for the cause. Urgency: check soon - the machine may derate or limit a function. Check first: check the hydraulic oil level at the sight gauge and top up with the correct fluid.
Can I keep running with it?
Check soon
The machine may derate or limit a function. Find the cause before the next shift.
What should I check first?
Check the hydraulic oil level at the sight gauge and top up with the correct fluid
Then 3 more checksWhere this code shows
On touchscreen R-series machines, touch the screen and pick Service Codes from the menu.
Checks
0 of 4 done
Causes
- Hot ambient with heavy continuous load
- Hydraulic oil cooler clogged with dirt or debris
- Low hydraulic oil level
- Cooler fan not turning or belt slipping
How it failed
You'll notice: Hydraulic oil is running hotter than normal and the warning light or message comes on.
OtherRead from how the source describes the code
The source does not say how this one failed.
- Meter test
- Read the code with the service tool and note which other codes are active with it.
- Good result
- Codes that appear together usually share one cause - start with the wiring they share.
When to stop
Lower attachments to the ground and relieve hydraulic pressure before loosening any fitting. Never feel for a leak with your hand - oil under pressure can inject through skin.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Same part, other failures: Hydraulic oil and case drain temperatures
- VSE001-00Oil temp. sensor, signal above normal rangeReal conditionCheck soon
- VSE001-03Oil temp. sensor, voltage above normalShorted highCheck soon
- VSE001-04Oil temp. sensor, voltage below normalShorted lowCheck soon
- 07-10Hydraulic oil temperature highOtherCheck soon
- 07-11Hydraulic oil temperature extremely highOtherStop now
- 07-15Hydraulic oil temperature shutdown levelOtherStop now
- 07-21Hydraulic oil temperature out of range highOtherCheck soon
- 07-22Hydraulic oil temperature out of range lowOtherCheck soon
- U10A0-08Drive motor case drain hydraulic oil temperature sensor no communicationLost messageCheck soon
Show the other 16 codesHide the other codes
- C10A0-16Drive motor case drain hydraulic oil temperature out of range lowOtherCheck soon
- C10A0-17Drive motor case drain hydraulic oil temperature out of range highOtherCheck soon
- C10A1-FADrive motor case drain hydraulic oil temperature highLost messageCheck soon
- C10A1-FBDrive motor case drain hydraulic oil temperature extremely highOtherStop now
- C10A1-FCDrive motor case drain hydraulic oil temperature reduced performanceOtherCheck soon
- U10A5-08Pump case drain hydraulic oil temperature sensor no communicationLost messageCheck soon
- C10A5-16Pump case drain hydraulic oil temperature out of range lowOtherCheck soon
- C10A5-17Pump case drain hydraulic oil temperature out of range highOtherCheck soon
- C10A6-FAPump case drain hydraulic oil temperature highLost messageCheck soon
- C10A6-FBPump case drain hydraulic oil temperature extremely highOtherStop now
- C10A6-FCPump case drain hydraulic oil temperature highLost messageCheck soon
- M0710Hydraulic oil temperature too highReal conditionCheck soon
- M0711Hydraulic oil temperature extremely highOtherStop now
- M0715Hydraulic oil temperature shutdownOtherStop now
- M0721Hydraulic oil temperature out of range highOtherCheck soon
- M0722Hydraulic oil temperature out of range lowShorted lowCheck soon
Other Bobcat codes: Hydraulics
Related on Equipments Finder
Source
Bobcat S205 Operation & Maintenance Manual, service codes list
This source lists 07-10 and its meaning. The guidance on this page is general, not taken from it.
The source covers: Older Bobcat skid-steer and track loaders using the two-digit service codes (S205 manual, similar models).
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
