EF Logo

crawler cranemade by LiebherrGlobal

Liebherr HS 895 HDSpecs, weight and dimensions

Max lifting capacity
200 t
220.5 US tons
Main boom, extended
84.2 m
276 ft 3 in
Weight
172.2 t
172,200 kg

Quick answer

The Liebherr HS 895 HD is a 172.2-tonne crawler crane with a MAN D 2842 LE engine rated at 670 kW (898 hp). It lifts up to 200 t. It suits heavy lifts on large sites, steel and precast erection and piling and foundation work. Its rivals include the Kobelco CKE1350G-4 (150 t) and the Liebherr LTR 1100 (100 t).

Liebherr HS 895 HD (illustration)

How much does a Liebherr HS 895 HD weigh?

The Liebherr HS 895 HD weighs 172.2 tonnes (172,200 kg, 379,636 lb) in working order. That is 25% heavier than the Kobelco CKE1350G-4 (137.9 t) and 67% heavier than the Liebherr LTR 1100 (103 t). It puts 0.98 kg/cm2 of pressure on the ground. The figures are from Liebherr HS 895 HD technical data, metric edition 10099249 (03/2011).

What engine is in the Liebherr HS 895 HD?

The Liebherr HS 895 HD is offered with MAN D 2842 LE; complies with NRMM EPA / CARB Tier 2. The sheet's power figure is 670 kW (898 hp) gross (ISO 3046 rating at 1,900 rpm). The fuel tank holds 950 L (251 gal). The figures are from Liebherr HS 895 HD technical data, metric edition 10099249 (03/2011).

How much can a Liebherr HS 895 HD lift?

The Liebherr HS 895 HD lifts up to 200 t. In imperial units the lifting capacity is 220.5 US tons. The sheet notes: at 5 m radius with 75.1 t counterweight and 27 t carbody counterweight (350 kN winches); 175.5 t at 4.9 m with the 55.1 t counterweight. On the same row of their sheets, the Kobelco CKE1350G-4 shows 150 t and the Liebherr LTR 1100 shows 100 t.

What are the Liebherr HS 895 HD dimensions?

The Liebherr HS 895 HD is 17.38 m (57 ft) long and 3.95 m (13 ft) high. The figures are from Liebherr HS 895 HD technical data, metric edition 10099249 (03/2011). These are the sheet figures for the standard build; options and attachments change them.

Liebherr HS 895 HD vs Kobelco CKE1350G-4: what is the difference?

The Liebherr HS 895 HD is 25% heavier than the Kobelco CKE1350G-4: 172.2 t against 137.9 t. The Liebherr HS 895 HD has more gross power (670 kW against 270 kW) and carries more fuel (950 L against 400 L). Both sets of figures are the makers’ own, for the builds on our sheets.

Liebherr HS 895 HD dimensions

Liebherr HS 895 HD, side view with dimensions (illustration)3.95 m17.4 m
Side view
Liebherr HS 895 HD, front view (illustration)
Front view
Overall height
3.95 m
Overall length
17.4 m

Illustration; figures from the maker's sheet.

How big is the Liebherr HS 895 HD?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Liebherr HS 895 HD drawn to scale beside a person, a pickup truck and a 40 ft container. The Liebherr HS 895 HD is 17.38 m long - about 1.4 forty-foot containers - and 3.95 m tall, 2.3 times a person's height.Liebherr HS 895 HD17.38 × 3.95 mPerson1.75 m tallPickup truck5.3 × 1.8 m40 ft container12.19 × 2.59 m
The Liebherr HS 895 HD is 17.38 m long - about 1.4 forty-foot containers - and 3.95 m tall, 2.3 times a person's height.

Liebherr HS 895 HD load chart

What it lifts as the radius grows, from the maker’s chart. Not for lift planning.

  1. 175.5 t4.9 m20 m boom
  2. 88 t10 m20 m boom
  3. 33 t20 m25.7 m boom
  4. 18 t30 m31.7 m boom

Every radius and boom length, 3 configurations, with a reader.

Full load chart

Liebherr HS 895 HD specifications

Every figure is the maker's, with the document and page it came from. Sheet last updated 18 November 2026.

48 figures in 6 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Overall length17.38 mBoom foot front to rear end of the counterweight attachments, boom foot extended forward as drawn[1] p.2
Overall crawler length9.36 m[1] p.2
Distance between tumbler centres7.945 m[1] p.2
Overall crawler width6.8 mHydraulically extended track gauge[1] p.2
Shoe width1.1 mTrack pads, each crawler[1] p.2
Overall height3.95 mTop of the rear attachments; the exhaust stack is drawn taller[1] p.2
Height to underside of counterweight1.81 m[1] p.2
Ground clearance, carbody0.62 m[1] p.2
Dimensions, part 2 of 2
FigureValue (metric)Source
Height to top of crawlers1.61 m[1] p.2
Boom foot head height2.445 mCentre of the boom foot front end above ground, as dimensioned on the drawing[1] p.2
Width over upper structure5.48 mCounterweight side blocks to operator cab[1] p.2
Width of machinery house3.675 m[1] p.2
Tail slewing radius6.36 m[1] p.2
Front slewing radius3.65 mCentre of rotation to the front of the cab and boom foot swing envelope[1] p.2
Rear end of crawlers to tail swing1.72 mTail of the superstructure beyond the crawler end[1] p.2
Transport width, base machine3.5 mBase machine with A-frame and winches, without crawlers, boom foot and counterweight[1] p.3

Weight

Weight, part 1 of 2
FigureValue (metric)Source
Operating weight172,200 kgBase machine with HD undercarriage, two 350 kN main winches with 150 m rope, 20 m main boom (boom foot 7 m, head 7 m, section 6 m), 55.1 t basic counterweight, 1100 mm pads, 60 t hook block[1] p.2
Counterweight55,100 kgBasic counterweight; 75.1 t counterweight plus 27 t carbody counterweight is the heavy configuration (200 t chart)[1] p.2
Transport weight, base machine60,700 kgWith A-frame, two 350 kN winches with 150 m rope and jack-up system (1.7 t); without crawlers, boom foot and counterweights[1] p.3
Crawler weight (each)25,510 kg1100 mm track pads, transport width 1,450 mm[1] p.3
Weight, part 2 of 2
FigureValue (metric)Source
Boom foot weight3,720 kgIncluding pendants[1] p.3
Boom head weight4,250 kgIncluding pendants, polyamide sheaves[1] p.3
Boom section weight, 11.7 m2,380 kg3 m section 1,030 kg; 6 m section 1,630 kg[1] p.3
Ground pressure0.98 kg/cm2[1] p.2

Crane

Crane, part 1 of 2
FigureValue (metric)Source
Max lifting capacity200 tAt 5 m radius with 75.1 t counterweight and 27 t carbody counterweight (350 kN winches); 175.5 t at 4.9 m with the 55.1 t counterweight[1] p.12
Main boom length (m, fully extended)84.2 mLengths over 75.5 m need the additional counterweight for self-erection[1] p.10
Main boom length retracted (m)20 mShortest main boom: boom foot 7 m, section 6 m, head 7 m[1] p.10
Fixed jib11 m to 26 m (No. 1008)[1] p.2
Auxiliary jib capacity35 tAuxiliary jib on the boom head, load chart programmed in the LMI[1] p.10
Boom elevation angle15 to 86 deg[1] p.10
Boom hoistMax 150 kN line pull, 24 mm rope; boom up from 15 to 86 deg in 160 s[1] p.5
Main winches2 x 350 kN line pull, 36 mm rope, 830 mm drum, 46.9 m rope on first layer[1] p.5
Crane, part 2 of 2
FigureValue (metric)Source
Hoist line speed (max)0-77 m/min; 0-157 m/min with the change gearbox[1] p.5
Duty cycle line pull30 t on one rope, 49.2 t on two ropes (36 mm rope, minimum breaking load 1,186 kN)Two-rope lifting is allowed only when neither winch is overloaded[1] p.8
Auxiliary and tagline winchesAuxiliary winch 70 kN in the boom foot; tagline winch 70 kN or 30 kN with free fall (options)[1] p.5
Slewing speed0-3.6 rpm, continuously variable, three speed ranges; second swing drive standard, third optional[1] p.5
Hook block weights120 t (2 sheaves) 1,400 kg; 200 t (3 sheaves) 2,600 kg; 35 t single hook 400 to 1,200 kg[1] p.4
Casing oscillator operationDrilling diameter up to 3,300 mm, max chisel weight 18 t; hydraulic supply 2 x 350 L/min at 300 bar[1] p.6
Dynamic compaction capacity40 t at 9 m radius with booms 25.7-37.4 m (38 t with 43.4 m), not above 75 % of tipping load, lift height up to 30 m[1] p.7

Undercarriage

Undercarriage
FigureValue (metric)Source
Travel speed1.4 km/h2nd gear; 0.75 km/h in 1st gear[1] p.5
Track shoes1100 mm track pads, maintenance-free tracks, hydraulic chain tensioning[1] p.5
Travel driveAxial piston motor with spring-loaded multi-disc brake; hydraulically adjustable track gauge[1] p.5

Engine

Engine
FigureValue (metric)Source
Engine modelMAN D 2842 LE; complies with NRMM EPA / CARB Tier 2[1] p.5
Gross power670 kW (898 hp)ISO 3046 rating at 1,900 rpm[1] p.5
Fuel tank950 LWith continuous level indicator and reserve warning[1] p.5

Hydraulics

Hydraulics
FigureValue (metric)Source
Main pumpsAxial piston pumps in closed and open circuits with flow control on demand[1] p.5
Max working pressure350 bar[1] p.5
Hydraulic tank capacity1,360 L[1] p.5

Build: Liebherr HS 895 HD duty cycle crawler crane (MAN D 2842 LE engine, HD undercarriage with 1100 mm track pads, 55.1 t basic counterweight, main boom 20-84.2 m) per Liebherr's metric technical data sheet 10099249 (03/2011); later-generation HS 8xx models are not covered. Letters on the drawing are ours, because the maker's drawing is unlettered.

  1. [1]Liebherr HS 895 HD technical data, metric edition 10099249 (03/2011)
  2. [2]Liebherr HS 895 HD technical data, US edition (lb and ft)

Liebherr HS 895 HD against its rivals

The crawler cranes nearest in weight from other makers, figure by figure, each shown at the same scale.

Liebherr HS 895 HD, Kobelco CKE1350G-4, Liebherr LTR 1100: specifications side by side
FigureLiebherr HS 895 HDthis pageKobelco CKE1350G-4 specsLiebherr LTR 1100 specs
Operating weight172,200 kg137,900 kg103,000 kg
Gross power670 kW (898 hp)270 kW (362 hp)129 kW (175 hp)
Max torquenot on its sheet1,435 Nm980 Nm
Fuel tank950 L400 L727 L
Every figureFull sheet

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the Liebherr HS 895 HD if you need more gross power (670 kW) and a bigger fuel tank (950 L).
  • Pick the Kobelco CKE1350G-4 if you need more torque (1,435 Nm).
  • Pick the Liebherr LTR 1100 if the lightest machine matters: at 103 t it weighs the least of the 3, and it leads no other figure here.

Liebherr HS 895 HD prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

See all 1

Typical hire, per daymedian of 30

AED 2,225 /day

No priced Liebherr HS 895 HD for hire yet: this is all crawler cranes

Low AED 1,000High AED 8,000

Liebherr HS 895 HD transport size and weight

The machine as it stands on the sheet. Your haulier or forwarder confirms the load.

Length
17.38 m
Width
not published
Height
3.95 m
Weight
172.2 t

Tools for a Liebherr HS 895 HD

For the people who run one: codes, charts and calculators that fit a crawler crane.

Popular Liebherr crawler crane models

More Liebherr HS 895 HD questions

How long is the Liebherr HS 895 HD's boom?

The main boom extends to 84.2 m (276 ft 3 in).

How heavy is the counterweight on a Liebherr HS 895 HD?

55,100 kg (121,475 lb).

How tall is a Liebherr HS 895 HD?

3.95 m (13 ft) overall.

What is the tail swing radius of a Liebherr HS 895 HD?

6.36 m (20 ft 10 in).

How long is a Liebherr HS 895 HD?

17.38 m (57 ft) overall.

How fast does a Liebherr HS 895 HD go?

Its top speed is 1.4 km/h (0.9 mph).

What is the ground pressure of a Liebherr HS 895 HD?

0.98 kg/cm2.

What is the Liebherr HS 895 HD's fuel tank capacity?

950 L (251 gal).

What are the Liebherr HS 895 HD's main competitors?

The machines nearest it in size are the Kobelco CKE1350G-4 and the Liebherr LTR 1100. Each has a side-by-side comparison on EquipmentsFinder.

Is the Liebherr HS 895 HD sold in the UAE?

Not new through a Gulf dealer: it is sold in other markets worldwide. Used and imported machines do come up on EquipmentsFinder.

What is a Liebherr HS 895 HD used for?

A crawler crane: a lattice-boom or telescopic crane on tracks that travels with its load and lifts heavy, long-reach picks on site. Typical jobs: heavy lifts on large sites, steel and precast erection, piling and foundation work, bridge and plant construction.

Embed this spec card

The Liebherr HS 895 HD's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/liebherr-hs895" title="Liebherr HS 895 HD specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/liebherr-hs895">Liebherr HS 895 HD specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Liebherr HS 895 HD on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.