EF Logo

dozermade by KomatsuUAE, Global

Komatsu D155AX-6Specs, weight and dimensions

Weight
39.5 t
39,500 kg
Horsepower
354 hp
264 kW
Blade width
4.06 m
13.3 ft

Quick answer

The Komatsu D155AX-6 is a 39.5-tonne dozer with a Komatsu SAA6D140E-5 engine rated at 264 kW (354 HP). Its blade width is 4.06 m. It suits bulk earthmoving and pushing, spreading and levelling fill and road and pad building. People compare it with the Cat D9 (50 t) and the Shantui SD22 (23.4 t).

Komatsu D155AX-6 (illustration)

How much does a Komatsu D155AX-6 weigh?

The Komatsu D155AX-6 weighs 39.5 tonnes (39,500 kg, 87,100 lb) in working order, with fuel, operator and standard attachment. That is 21% lighter than the Cat D9 (50 t) and 69% heavier than the Shantui SD22 (23.4 t). It puts 106 kPa (1.08 kg/cm2) of pressure on the ground. The figures are from Komatsu D155AX-6 brochure CEN00103-04 (Komatsu Australia).

What engine is in the Komatsu D155AX-6?

The Komatsu D155AX-6 has a Komatsu SAA6D140E-5 engine rated at 264 kW (354 HP) net, ISO 9249 / SAE J1349, at 1,900 rpm; 239 kW (320 HP) at maximum radiator fan speed. It displaces 15.2 L. Emissions: EPA Tier 3 and EU Stage 3A emissions certified. The fuel tank holds 625 L (165.1 US gal) and the engine takes 37 L (9.8 US gal) of oil.

What blade does the Komatsu D155AX-6 have?

The Komatsu D155AX-6's blade capacity is 9.4 m³. In imperial units the blade capacity is 12.3 yd3. The sheet notes: SIGMADOZER; 9.4 m3 Semi-U, 11.9 m3 Full-U, 4.6 m3 Angle. On the same row of their sheets, the Cat D9 shows 13.6 m³ and the Shantui SD22 shows 6.4 m³.

What are the Komatsu D155AX-6 dimensions?

The Komatsu D155AX-6 is 6.13 m (20 ft 1 in) long, 2.70 m (8 ft 10 in) wide and 3.40 m (11 ft 2 in) high. As it stands it is too big for the door of a standard shipping container. The Cat D9 is 8.22 m long, 2.87 m wide and 3.82 m high.

Komatsu D155AX-6 vs Cat D9: what is the difference?

The Komatsu D155AX-6 is 21% lighter than the Cat D9: 39.5 t against 50 t. The Komatsu D155AX-6 digs deeper (0.617 m against 0.606 m), is narrower to transport (2.7 m against 2.87 m) and is lower to transport (3.395 m against 3.82 m). Both sets of figures are the makers’ own, for the builds on our sheets.

These figures are for the D155AX-6. The D155AX-8 and D155AX-5 are not covered here and have figures of their own, so check the serial plate before using these for one.

Komatsu D155AX-6 dimensions

Komatsu D155AX-6, side view with dimensions (illustration)3.4 m3.28 m6.13 m
Side view
Komatsu D155AX-6, front view (illustration)2.7 m
Front view
Overall height
3.4 m
Track on ground
3.28 m
Overall length
6.13 m
Overall width
2.7 m

Illustration; figures from the maker's sheet.

How big is the Komatsu D155AX-6?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Komatsu D155AX-6 drawn to scale beside a person and a pickup truck. The Komatsu D155AX-6 is 6.13 m long - about 1.2 pickup trucks - and 3.4 m tall, 1.9 times a person's height.Komatsu D155AX-66.13 × 3.4 mPerson1.75 m tallPickup truck5.3 × 1.8 m
The Komatsu D155AX-6 is 6.13 m long - about 1.2 pickup trucks - and 3.4 m tall, 1.9 times a person's height.

Komatsu D155AX-6 specifications

Every figure is the maker's, with the document and page it came from. Sheet last updated 17 November 2026.

73 figures in 9 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Blade width4.06 mSIGMADOZER, across the blade; 4.13 m Semi-U, 4.225 m Full-U, 4.85 m Angle[1] p.6
Track gauge2.14 m[1] p.6
Width over tracks2.7 mTrack gauge 2.14 m plus 560 mm shoe; Komatsu prints the two figures, not the sum[1] p.6
Overall height (to top of blade tilt cylinder)3.385 mKomatsu's drawing letters this dimension without a name; named here from where its extension line meets the machine[1] p.6
Blade height1.85 mSIGMADOZER[1] p.6
Track length on ground3.275 m[1] p.6
Overall length (with blade and ripper)8.225 mSIGMADOZER and giant ripper; 6.125 m with the SIGMADOZER alone[1] p.6
Rear of track to end of ripper2.745 mLetter G in Komatsu's drawing, named here from where its dimension line starts and ends[1] p.6
Dimensions, part 2 of 2
FigureValue (metric)Source
Ripper maximum penetration1.24 mVariable giant ripper, single shank, parallelogram type; 0.90 m with the multi-shank ripper[1] p.6
Ripper maximum lift above ground0.95 mGiant and multi-shank ripper[1] p.6
Height (to top of cab)3.395 mROPS cab[1] p.6
Overall length (with blade)6.125 mTractor with SIGMADOZER, no ripper; 6.175 m Semi-U, 6.59 m Full-U, 6.743 m Angle[1] p.6
Ground clearance0.5 m[1] p.6
Shoe width0.56 mStandard single-grouser; 710 mm maximum[1] p.6
Grouser height0.08 m[1] p.6
Blade length x height optionsSIGMADOZER 4,060 x 1,850 mm; Semi-U 4,130 x 1,790 mm; Full-U 4,225 x 1,790 mm; Angle 4,850 x 1,205 mm[1] p.6

Weight

Weight, part 1 of 2
FigureValue (metric)Source
Operating weight39,500 kgIncluding strengthened SIGMADOZER, giant ripper, ROPS cab, operator, standard equipment, full fuel tank and rated fluids[1] p.6
Tractor weight31,000 kgIncluding ROPS cab, operator, standard equipment, full fuel tank and rated fluids[1] p.6
Weight, part 2 of 2
FigureValue (metric)Source
Blade weight (SIGMADOZER)4,940 kgAdditional weight; 5,360 kg strengthened SIGMADOZER, 4,960 kg Semi-U, 5,630 kg Full-U, 5,170 kg Angle[1] p.6
Ripper weight (giant ripper)2,440 kgAdditional weight, including hydraulic control unit; 3,760 kg for the multi-shank ripper[1] p.7

Performance

Performance, part 1 of 2
FigureValue (metric)Source
Blade capacity9.4 m³SIGMADOZER; 9.4 m3 Semi-U, 11.9 m3 Full-U, 4.6 m3 Angle[1] p.6
Blade lift height1.32 mMaximum lift above ground, SIGMADOZER; 1.255 m Semi-U and Full-U, 1.562 m Angle[1] p.6
Digging depth0.617 mMaximum drop below ground, SIGMADOZER; 0.593 m Semi-U and Full-U, 0.664 m Angle[1] p.6
Performance, part 2 of 2
FigureValue (metric)Source
Maximum tilt at blade corner0.92 mMaximum tilt adjustment, SIGMADOZER; 0.953 m Semi-U, 0.97 m Full-U, 0.52 m Angle[1] p.6
Ground pressure106 kPa (1.08 kg/cm2)With strengthened SIGMADOZER, giant ripper and ROPS cab (operating weight)[1] p.6
Ground pressure (tractor only)82.4 kPa (0.84 kg/cm2, 11.9 psi)[1] p.6

Engine

Engine, part 1 of 2
FigureValue (metric)Source
Engine modelKomatsu SAA6D140E-5[1] p.6
Type4-cycle, water-cooled, direct injection[1] p.6
AspirationTurbocharged, air-to-air aftercooled, cooled EGR[1] p.6
EmissionsEPA Tier 3 and EU Stage 3A emissions certified[1] p.6
Cylinders6[1] p.6
Bore x stroke140 x 165 mm[1] p.6
Displacement15.2 L[1] p.6
Engine, part 2 of 2
FigureValue (metric)Source
Gross power268 kW (360 HP)SAE J1995, at 1,900 rpm[1] p.6
Net power264 kW (354 HP)ISO 9249 / SAE J1349, at 1,900 rpm; 239 kW (320 HP) at maximum radiator fan speed[1] p.6
Fan driveHydraulic[1] p.6
GovernorAll-speed and mid-range, electronic[1] p.6
Rated engine speed1,900 rpm[1] p.6
Net power at max radiator fan speed239 kW (321 hp)[1] p.6
Lubrication systemGear pump, force lubrication, full-flow filter[1] p.6

Transmission

Transmission, part 1 of 2
FigureValue (metric)Source
TransmissionTORQFLOW: 3-element 1-stage 1-phase torque converter with lockup clutch, planetary multi-disc power shift, 3 forward / 3 reverseAutomatic and manual gearshift modes[1] p.6
Travel speed, forward (max)11.6 km/h3rd; 1st 3.8, 2nd 5.6, 3rd low 7.5 km/h[1] p.6
Travel speed, reverse (max)14 km/h3rd; 1st 4.6, 2nd 6.8, 3rd low 9.2 km/h[1] p.6
SteeringHydrostatic steering system (HSS), PCCS lever; counter-rotation turnsWet multi-disc, spring-actuated, hydraulically released pedal service brakes[1] p.6
Transmission, part 2 of 2
FigureValue (metric)Source
Min turning radius2.14 m[1] p.6
Final drivesDouble-reduction spur and planetary, bolt-on segmented sprockets[1] p.6
Travel speed by gear, forward / reverseF1/R1 3.8 / 4.6; F2/R2 5.6 / 6.8; F3L/R3L 7.5 / 9.2; F3/R3 11.6 / 14.0 km/h[1] p.6
BrakesWet multi-disc, pedal-controlled, spring-actuated and hydraulically released; gearshift lock lever applies the parking brake[1] p.6

Undercarriage

Undercarriage, part 1 of 2
FigureValue (metric)Source
UndercarriageK-Bogie, oscillation type with equalizer bar and forward-mounted pivot shafts[1] p.6
Track roller frameMonocoque, high-tensile-strength steel[1] p.6
Track shoes (each side)42[1] p.6
Track rollers (each side)7[1] p.6
Undercarriage, part 2 of 2
FigureValue (metric)Source
Carrier rollers (each side)2[1] p.6
Shoe width options560 mm standard; 610, 660, 710 mm single-grouser; 560, 610, 660 mm extreme service[1] p.7
Ground contact area36,680 cm²560 mm shoes[1] p.6

Blade

Blade, part 1 of 2
FigureValue (metric)Source
Blade capacity (Full-U)11.9 m³[1] p.6
Semi-U tilt dozer9.4 m3, 4,130 x 1,790 mm, overall length 6,175 mm, additional weight 4,960 kg[1] p.6
Blade, part 2 of 2
FigureValue (metric)Source
Angle dozer4.6 m3, 4,850 x 1,205 mm, overall length 6,743 mm, additional weight 5,170 kg[1] p.6
Strengthened SIGMADOZER weight5,360 kg[1] p.6

Ripper

Ripper, part 1 of 2
FigureValue (metric)Source
Ripper beam length (giant ripper)1.4 m[1] p.7
Ripper maximum penetration (multi-shank)0.9 mVariable multi-shank ripper, three shanks[1] p.7
Ripper beam length (multi-shank)2.32 m[1] p.7
Ripper, part 2 of 2
FigureValue (metric)Source
Ripper weight (multi-shank, with hydraulic control unit)3,760 kg[1] p.7
Standard digging angle49°[1] p.7

Hydraulics

Hydraulics, part 1 of 2
FigureValue (metric)Source
SystemClosed-centre load sensing system (CLSS)Variable piston pump; all spool control valves mounted beside the hydraulic tank[1] p.6
Pump flow180 L/minImplement circuit, at rated engine speed[1] p.6
Pump flow (steering)325 L/minSteering circuit, at rated engine speed[1] p.6
Max pressure27.5 MPa (280 kg/cm2)Implement relief valve setting; 38.2 MPa (390 kg/cm2) for steering[1] p.6
Blade lift cylinders2 - bore 110 mm[1] p.6
Hydraulics, part 2 of 2
FigureValue (metric)Source
Blade tilt cylinder1 - bore 160 mm[1] p.6
Ripper lift cylinder1 - bore 180 mm[1] p.6
Ripper tilt cylinder1 - bore 200 mm[1] p.6
Relief valve setting, steering38.2 MPa (390 kg/cm2)[1] p.6

Build: Komatsu D155AX-6 (SAA6D140E-5, U.S. EPA Tier 3 / EU Stage 3A, strengthened SIGMADOZER blade, giant ripper, ROPS cab, 560 mm single-grouser shoes) from Komatsu's D155AX-6 brochure CEN00103-04 (Komatsu Australia, printed Feb 2013). Komatsu's current D155AX-8 is a Tier 4 Final machine and no Middle East D155AX sheet could be found, so this Tier 3 -6 sheet is used.

  1. [1]Komatsu D155AX-6 brochure CEN00103-04 (Komatsu Australia)

Komatsu D155AX generations

The years each was built and what changed, each fact with the page it was read from.

  1. -

    D155AX-6

    Komatsu SAA6D140E-5 engine, U.S. EPA Tier 3 / EU Stage 3A, with a strengthened SIGMADOZER blade and ROPS cab. This is the specification used on this page. komatsu.com.au

  2. 2014

    D155AX-8from 2014Current

    Launched in November 2014 in North America with the SAA6D140E-7 engine, EPA Tier 4 Final, using a diesel particulate filter and SCR with diesel exhaust fluid. Komatsu cites about 10% better fuel efficiency from a lock-up torque converter and a 12.3 yd3 SIGMADOZER blade. constructionequipmentguide.com

The specs on this page are for the D155AX-6 (Tier 3 / Stage 3A, SAA6D140E-5). Other generations differ in engine, weight and size.

Komatsu D155AX-6 service

What each system holds and when Komatsu says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.

Service capacities

Fuel tank
625 L165.1 US gal
Cooling system
82 L21.7 US gal
Engine oil, with filter
37 L9.8 US gal
Damper
1.5 L0.4 US gal
Transmission, bevel gear and steering system
90 L23.8 US gal
Final drives (each)
31 L8.2 US gal
Hydraulic tank
85 L22.5 US gal
Hydraulic oil, ripper (additional)
37 L9.8 US gal

Komatsu D155AX-6 against its rivals

The dozers nearest in weight from other makers, figure by figure, each shown at the same scale.

Komatsu D155AX-6, Cat D9, Shantui SD22, Cat D8: specifications side by side
FigureKomatsu D155AX-6this pageCat D9 specsShantui SD22 specsCat D8 specs
Operating weight39,500 kg49,988 kg23,400 kg39,000 kg
Gross power268 kW (360 HP)363 kW (487 hp)not on its sheet296 kW (397 hp)
Digging depth0.617 m0.606 m0.538 m0.576 m
Blade capacity9.4 m³13.6 m³6.4 m³10.3 m³
Pump flow180 L/minnot on its sheet262 L/min259 L/min
Fuel tank625 L963 L450 L624 L
Travel speed, forward (max)11.6 km/h11.6 km/h11.2 km/h10.3 km/h
Min turning radius2.14 mnot on its sheet3.3 mnot on its sheet
Width over tracks2.7 m2.87 m2.62 m2.79 m
Every figureFull sheet

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the Komatsu D155AX-6 if you need a deeper dig (0.617 m) and a tighter turn (2.14 m).
  • Pick the Cat D9 if you need more gross power (363 kW), a bigger blade (13.6 m³) and a bigger fuel tank (963 L).
  • Pick the Shantui SD22 if you need more hydraulic flow (262 L/min) and a narrower machine to move (2.62 m).

Komatsu D155AX-6 prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

Komatsu D155AX-6 on EquipmentsFinder in the UAE now: 3 listed for rent, 1 listed for sale. Too few carry a price to give a Komatsu D155AX-6 range, so the figure below is for all dozers.

See all 3

Typical hire, per daymedian of 4

AED 1,350 /day

No priced Komatsu D155AX-6 for hire yet: this is all dozers

Low AED 1,000High AED 3,000

Who is asking for dozers in the UAE

Contractors posted 21 requests for dozers on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Abu Dhabi (11), Sharjah (6) and Dubai (4). Requests name a kind of machine, not a model, so this counts every dozer, the Komatsu D155AX-6 among them.

Requests, last 12 months
21
For Abu Dhabi
11
For Sharjah
6
  • Dozer D-8 and D-9 Required For RentAbu Dhabi / 17 November 2026
  • Dozer D-8 Required For RentAbu Dhabi / 9 November 2026
  • Wheel Dozer Required For RentAbu Dhabi / 7 November 2026

Open dozer requests on the Inquiry BoardPost a request for a Komatsu D155AX-6

Does a Komatsu D155AX-6 fit in a shipping container?

The machine as it stands on the sheet. Your haulier or forwarder confirms the load.

No. As it stands on the sheet the Komatsu D155AX-6 is 2.70 m wide against a 2.34 m door opening and 3.40 m high against a 2.28 m door of a standard container, so it ships on a flat rack, by RoRo or as break-bulk unless it is stripped down.

Length
6.13 m
Width
2.7 m
Height
3.4 m
Weight
39.5 t

Container figures: door opening 2.34 m wide by 2.28 m high, 5.9 m inside a 20 ft box and 12.03 m inside a 40 ft one (Hapag-Lloyd container specification). A size check only: payload is on each container's plate. Trailer class and road permits depend on the haulier and the route, so they are not given here.

Tools for a Komatsu D155AX-6

For the people who run one: codes, charts and calculators that fit a dozer.

Same class: 30 to 45 ton dozers

30 to 45 ton dozers with an operating weight of 25 to 45 t, lightest first. The Komatsu D155AX-6 is 4 of 4; every figure is the maker's.

  1. 1Cat D730.7 t
  2. 2Shantui SD3237.2 t
  3. 3Cat D839 t
  4. 4Komatsu D155AX-6This page39.5 t

Popular Komatsu dozer models

Komatsu D155AX-6 fault codes and serial number

All Komatsu fault codesFind the year from a Komatsu serial number

More Komatsu D155AX-6 questions

What size blade does a Komatsu D155AX-6 have?

9.4 m³ (12.3 yd3) with the standard blade.

How wide is the blade on a Komatsu D155AX-6?

4.06 m (13.3 ft).

How much horsepower does the Komatsu D155AX-6 have?

354 hp (264 kW) net, ISO 9249 / SAE J1349, at 1,900 rpm; 239 kW (320 HP) at maximum radiator fan speed.

How tall is a Komatsu D155AX-6?

3.40 m (11 ft 2 in) overall.

How wide is a Komatsu D155AX-6?

2.70 m (8 ft 10 in) overall.

How deep can the ripper on a Komatsu D155AX-6 dig?

1.24 m (4.1 ft).

How fast does a Komatsu D155AX-6 go?

Its top speed is 11.6 km/h (7.2 mph).

What is the ground pressure of a Komatsu D155AX-6?

106 kPa (1.08 kg/cm2).

How high does the blade on a Komatsu D155AX-6 lift?

1.32 m (4.3 ft).

What are the Komatsu D155AX-6's main competitors?

The machines nearest it in size are the Cat D8, the Shantui SD32 and the Cat D9. Each has a side-by-side comparison on EquipmentsFinder.

Is the Komatsu D155AX-6 sold in the UAE?

Yes. The Komatsu D155AX-6 is sold in the UAE and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a Komatsu D155AX-6 used for?

A crawler dozer: a tracked tractor with a blade at the front, built to push, spread and level large volumes of earth. Typical jobs: bulk earthmoving and pushing, spreading and levelling fill, road and pad building, ripping hard ground.

Embed this spec card

The Komatsu D155AX-6's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/komatsu-d155ax" title="Komatsu D155AX-6 specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/komatsu-d155ax">Komatsu D155AX-6 specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Komatsu D155AX-6 on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.