EF Logo

Cat 432 vs Cat 434

The Cat 434 is the heavier machine, at 9.21 t against 8.44 t, and the Cat 432 has more power (70 kW against 64 kW).

The Cat 432 is ahead on: more power, more torque, dumps higher, more hydraulic flow, faster, turns tighter, lower to transport. The Cat 434 is ahead on: digs deeper, reaches further, reaches higher, bigger bucket or body, lifts or carries more, more digging or pushing force, narrower to transport.

Below, every figure both makers publish sits side by side, with the Cat 432 and the Cat 434 drawn to the same scale from their dimension drawings.

  1. Cat 432, side view

    Cat · backhoe loader

    Cat 432

    Full specsPDF

  2. Cat 434, side view

    Cat · backhoe loader

    Cat 434

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureCat 432Cat 434
Operating weight8,444 kg9,213 kg
Gross powerHigher is better75 kW+9%69 kW
Max torqueHigher is better397 Nm+3%384 Nm
Max dig depthHigher is better4.298 m4.349 m+1%
Reach at ground level, from slew centreHigher is better5.651 m5.655 m
Dump height with standard bucketHigher is better2.78 m+1%2.745 m
Maximum hinge pin heightHigher is better3.462 m3.518 m+2%
Shovel capacityHigher is better1.03 m³1.15 m³+12%
Tipping load at breakout pointHigher is better6,674 kg6,858 kg+3%
Shovel breakout forceHigher is better60 kN63 kN+5%
Pump flowHigher is better187 L/min+17%160 L/min
Top speedHigher is better40 km/h+11%36 km/h
Turning circle, outside front wheelsLower is better8.205 m+16%9.8 m
Overall widthLower is better2.352 m2.322 m+1%
Overall height (to top of cab)Lower is better2.822 m+2%2.875 m
Total travel length5.731 m5.921 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Overall length in roading position5.744 m5.852 mGP 1.15 m³ bucket; 5.840 m MP, 5.824 m MP with forks
Total travel length5.731 m5.921 mOverall transportation length, GP bucket
Total travel height3.806 mOverall transportation height3.78 mOverall transport height
Overall width2.352 m2.322 m
Overall height (to top of cab)2.822 mHeight to top of cab/canopy2.875 mHeight to top of cab/canopy
Height to top of exhaust2.715 m2.783 m
Rear axle centreline to front grille2.705 m2.795 m
Wheelbase2.2 m2WD/AWD2.235 mAWD
Shovel width (GP shovel)2.406 m2.434 m
Turning circle, outside front wheels8.205 mAWD, inner wheel not braked9.8 mAWD, inner wheel not braked, 28 in tyres
Turning circle, outside widest loader bucket10.745 mAWD, inner wheel not braked12.6 mAWD, inner wheel not braked, 28 in tyres

Stabilisers

Stabiliser spread, operating (outside)2.352 m2.352 m

Backhoe performance

Max dig depth4.298 mSAE maximum, 4.3 m standard stick4.349 mSAE maximum, 4.3 m standard stick
Max dig depth (manufacturer's maximum)4.778 m4.3 m standard stick4.827 mStandard stick; 4.832 m E-stick retracted, 5.748 m extended
Digging depth, 2440 mm flat bottom3.915 m3.974 mStandard stick; 3.978 m retracted, 5.040 m extended
Digging depth, 610 mm flat bottom4.255 m4.306 mStandard stick; 4.309 m retracted, 5.296 m extended
Reach at ground level, from slew centre5.651 m5.655 mReach from swing pivot at ground line, standard stick
Reach from rear axle centreline at ground line6.741 m6.745 mStandard stick; 7.676 m E-stick extended
Max load-over height3.991 mLoading height, standard stick3.909 mLoading height, standard stick; 3.920 m retracted, 4.487 m extended
Loading reach1.69 m1.808 mStandard stick; 1.758 m retracted, 2.641 m extended
Maximum operating height (backhoe)5.665 m5.578 mStandard stick; 6.145 m E-stick extended
Bucket tearout force63 kN63 kNBucket dig force
Dipper tearout force43 kN36 kNStick dig force, standard stick; 36.818 kN E-stick retracted, 26.879 kN extended
Swing arc180°180°
Bucket rotation205°205°

Loader performance

Shovel capacity1.03 m³MP bucket, SAE rated (GP bucket 1.0 m³)1.15 m³GP bucket, SAE rated, 2,434 mm wide; MP bucket also 1.15 m³
Lift capacity to full height3,488 kg4,626 kgGP bucket; 4,303 kg MP, 4,118 kg MP with forks
Shovel breakout force60 kN63 kNTilt breakout force, GP bucket; 63.334 kN MP
Lift breakout force53 kN61 kNGP bucket; 58.278 kN MP
Tipping load at breakout point6,674 kg6,858 kgGP bucket; 6,669 kg MP
Dump height with standard bucket2.78 m2.745 mAt maximum angle, GP bucket; 2.760 m MP
Maximum hinge pin height3.462 m3.518 m
Dump angle at full height45°45°
Dump reach at maximum angle0.732 m0.923 mGP bucket; 0.908 m MP
Maximum bucket rollback at ground level39°44°
Loader digging depth0.132 m0.154 mGP bucket; 0.153 m MP
Grille to bucket cutting edge, carry position1.471 m1.491 mGP bucket; 1.479 m MP, 1.459 m MP with forks
Maximum operating height (loader)4.365 m4.397 mGP bucket; 4.463 m MP

Weight

Operating weight8,444 kg9,213 kgMachine configuration: 74.5 kW engine, standard stick, standard cab with A/C, AWD standard shift, 1.15 m³ MP bucket, 610 mm hoe bucket, 440/80R24 tyres, no counterweight, 80 kg operator, full fuel
Operating weight (maximum, ROPS capacity)11,000 kg11,500 kg

Engine

Engine modelCat 3054C, mechanical turbo, 74.5 kWCat 3054C 68.5 kW, mechanical, turbocharged (standard); 3054C 74.5 kW and Cat C4.4 74.5 kW turbo intercooled optional
EmissionsTier 2 equivalent (3054C); Tier 3 equivalent (optional C4.4)Tier 2 equivalent (3054C); Tier 3 equivalent (C4.4)
Displacement4.4 L4.4 L
Bore105 mm105 mm
Stroke127 mm127 mm
Gross power75 kW (102 hp)69 kW (94 hp)SAE J1995 at 2,200 rpm; 75 kW for the 3054C 74.5 kW, 76 kW for the C4.4
Gross power (ISO 14396)74.5 kW (101 hp)At 2,200 rpm, both engines68 kW (93 hp)At 2,200 rpm; 74 kW for the 3054C 74.5 kW, 75 kW for the C4.4
Net power70 kW (95 hp)64 kW (87 hp)SAE J1349 at 2,200 rpm; 70 kW for the 3054C 74.5 kW, 69 kW for the C4.4
Max torque397 Nm384 NmSAE J1349 net at 1,400 rpm; 397 Nm 3054C 74.5 kW, 398 Nm C4.4

Transmission

TransmissionPowershift 4F/3R (standard); 6F/3R auto-shift optional, with or without lock-up torque converterPower shuttle, 4 forward / 4 reverse (standard); 4-speed powershift or 6-speed auto-shift with lock-up torque converter optional
Top speed40 km/h36 km/hPower shuttle, 4th gear; 40 km/h with powershift (4th) or auto-shift lock-up (6th)

Hydraulics

Hydraulic systemClosed center; variable-flow axial piston pumpClosed centre; variable-flow axial piston pump, load sensing
Pump flow187 L/minAt 2,200 rpm160 L/minAt 2,200 rpm
Max pressure250 barSystem pressure, backhoe and loader250 barBackhoe and loader, both 250 bar

Service capacities

Fuel tank160 L160 L
Engine oil, with filter9 L9 L
Cooling system18 LWith A/C17.5 LWith A/C
DEF tank19 L19 LAs printed on the sheet
Hydraulic system, with tank95 L95 L
Hydraulic tank42 L42 L
Transmission, power shift (AWD)19 L19 L
Rear axle16 L16 L
Front axle (AWD)11 L14 L

Sources: Cat 432 Backhoe Loader spec sheet AEHQ8258-01 (05-2020), AME / CIS / ANZP / SEA · Cat 434 Backhoe Loader spec sheet AEHQ8256-01 (05-2020), AME / CIS / ANZP / SEA

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m4 m5 m
Cat 432Cat 434Same scale, front edges and ground lined up.

Cat 432 vs Cat 434: questions

Which is bigger, the Cat 432 or Cat 434?

By operating weight the Cat 434 is the biggest at 9.21 t, then the Cat 432 at 8.44 t.

Which has more power, the Cat 432 or Cat 434?

The Cat 432: Cat 432 75 kW (102 hp), Cat 434 69 kW (94 hp) (gross power), a 9% difference.

Which digs deeper, the Cat 432 or Cat 434?

The Cat 434: Cat 432 4.298 m, Cat 434 4.349 m (max dig depth), a 1% difference.

Which reaches further, the Cat 432 or Cat 434?

The Cat 434: Cat 432 5.651 m, Cat 434 5.655 m (reach at ground level, from slew centre), a 0% difference.

Which has the bigger bucket, the Cat 432 or Cat 434?

The Cat 434: Cat 432 1.03 m³, Cat 434 1.15 m³ (shovel capacity), a 12% difference.

Which lifts or carries more, the Cat 432 or Cat 434?

The Cat 434: Cat 432 6,674 kg, Cat 434 6,858 kg (tipping load at breakout point), a 3% difference.

Which turns tighter, the Cat 432 or Cat 434?

The Cat 432: Cat 432 8.205 m, Cat 434 9.8 m (turning circle, outside front wheels), a 16% difference.

Which is narrower to transport, the Cat 432 or Cat 434?

The Cat 434: Cat 432 2.352 m, Cat 434 2.322 m (overall width), a 1% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.