EF Logo

Cat 216B3 vs Cat 226

The Cat 226 is the heavier machine, at 2.65 t against 2.58 t, and the Cat 226 has more power (49.1 kW against 35 kW).

The Cat 216B3 is ahead on: reaches further, dumps higher, more digging or pushing force, bigger fuel tank, faster, turns tighter, lower to transport. The Cat 226 is ahead on: more power, lifts or carries more, more hydraulic flow, narrower to transport.

Below, every figure both makers publish sits side by side, with the Cat 216B3 and the Cat 226 drawn to the same scale from their dimension drawings.

  1. Cat 216B3, side view

    Cat · skid steer loader

    Cat 216B3

    Full specsPDF

  2. Cat 226, side view

    Cat · skid steer loader

    Cat 226

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureCat 216B3Cat 226
Operating weight2,581 kg2,653 kg
Gross powerHigher is better38 kW50.1 kW+32%
Maximum reach, arms parallel to groundHigher is better1.291 m1.288 m
Dump height with standard bucketHigher is better2.169 m+4%2.077 m
Rated operating capacityHigher is better635 kg705 kg+11%
Tilt breakout forceHigher is better1,852 kgf+4%1,781 kgf
Pump flowHigher is better61 L/min69 L/min+13%
Fuel tankHigher is better58 L+2%57 L
Top speedHigher is better12.7 km/h+3%12.3 km/h
Turning radius from centre, machine rearLower is better1.502 m+1%1.513 m
Width over tyresLower is better1.525 m1.497 m+2%
Overall height (to top of cab)Lower is better1.95 m+4%2.028 m
Length with standard bucket3.233 m3.234 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Wheelbase0.986 m1.054 m
Length without attachment2.519 mwithout bucket2.524 mwithout bucket
Length with standard bucket3.233 mbucket on ground3.234 mbucket on ground
Overall height (to top of cab)1.95 mheight to top of cab (ROPS)2.028 mheight to top of cab
Overall height, bucket at max lift3.709 mmaximum overall height3.652 mmaximum overall height
Height to bucket hinge pin2.854 mbucket pin height at maximum lift2.818 mat maximum lift
Bucket pin height at carry0.2 m0.215 m
Dump reach at maximum height0.505 mreach at maximum lift and dump0.533 mreach at maximum lift and dump
Dump height with standard bucket2.169 mclearance at maximum lift and dump2.077 mclearance at maximum lift and dump
Ground clearance0.195 m0.175 m
Angle of departure26°28°
Bumper overhang behind rear axle0.967 m0.894 m
Dump angle at full height40°maximum dump angle47°maximum dump angle
Width over tyres1.525 m1.497 m
Turning radius from centre, machine rear1.502 m1.513 m
Turning radius from centre, coupler1.195 m1.104 m
Turning radius with standard bucket1.944 mfrom centre to bucket1.977 mfrom centre to bucket
Maximum reach, arms parallel to ground1.291 m1.288 m
Rollback fully raised at maximum height81°rack back angle at maximum height89°rack back angle at maximum height

Performance

Rated operating capacity635 kgno optional counterweight705 kg
Rated operating capacity with counterweight680 kgthe counterweight adds 45 kg (100 lb) of capacity750 kg
Tipping load1,270 kg1,410 kg
Tilt breakout force1,852 kgftilt cylinder1,781 kgftilt cylinder
Top speed12.7 km/hforward or reverse12.3 km/hone speed, forward or reverse

Weight

Operating weight2,581 kgwith 75 kg operator, all fluids, open ROPS, 1,524 mm dirt bucket, 10-16.5 tyres, no counterweight, manual coupler2,653 kg

Engine

Engine modelCat C2.2Cat C2.2 CRDI
EmissionsEU Stage IIIA equivalent / Bharat Stage IIIU.S. EPA Tier 4 Final / EU Stage V
Displacement2.2 L2.2 L
Bore84 mm84 mm
Stroke100 mm100 mm
Gross power38 kW (51 hp)SAE J199550.1 kW (67.1 hp)SAE J1995
Net power35 kW (47 hp)SAE 1349 / ISO 924949.1 kW (65.8 hp)SAE 1349
Cylinders4est.Estimate: same Cat C2.2 engine, listed as 4 cylinders on Cat's 226D3 sheet4Not printed in the sheet; follows from the printed displacement, bore and stroke (4 x 0.25*pi*bore^2*stroke).

Hydraulics

Pump flow61 L/minstandard flow, loader hydraulic flow69 L/minstandard flow, loader hydraulic flow
Max pressure23 000 kPaloader hydraulic pressure (3,335 psi)23 000 kPaloader hydraulic pressure, standard flow
Hydraulic power23.2 kW (31.1 hp)standard flow, calculated26.5 kW (35.5 hp)standard flow, calculated

Tyres

TyresCat 10 x 16.5tyre the sheet dimensions are based onCat 10 × 16.5

Service capacities

Fuel tank58 L57 L
Engine oil, with filter10 L10 L
Hydraulic tank35 L34 L
Hydraulic system, with tank55 L45 L
Cooling system10 L12 L

Cab

ROPSSAE J1040 MAY94, ISO 3471:1994ISO 3471:2008
FOPSSAE J/ISO 3449 APR98 Level I, ISO 3449:1992 Level ILevel II optionalISO 3449:2005 Level I

Sources: Cat 216B3 Skid Steer Loader spec sheet AEHQ6103-04 (12-2020), hosted by GMMCO (Cat dealer, India) · Cat 226D3 Skid Steer Loader spec sheet AEHQ8205-03 (07-2026), Am North / EU / APD / ANZP

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m
Cat 216B3Cat 226Same scale, front edges and ground lined up.

Cat 216B3 vs Cat 226: questions

Which is bigger, the Cat 216B3 or Cat 226?

By operating weight the Cat 226 is the biggest at 2.65 t, then the Cat 216B3 at 2.58 t.

Which has more power, the Cat 216B3 or Cat 226?

The Cat 226: Cat 216B3 38 kW (51 hp), Cat 226 50.1 kW (67.1 hp) (gross power), a 32% difference.

Which reaches further, the Cat 216B3 or Cat 226?

The Cat 216B3: Cat 216B3 1.291 m, Cat 226 1.288 m (maximum reach, arms parallel to ground), a 0% difference.

Which lifts or carries more, the Cat 216B3 or Cat 226?

The Cat 226: Cat 216B3 635 kg, Cat 226 705 kg (rated operating capacity), a 11% difference.

Which has the bigger fuel tank, the Cat 216B3 or Cat 226?

The Cat 216B3: Cat 216B3 58 L, Cat 226 57 L (fuel tank), a 2% difference.

Which turns tighter, the Cat 216B3 or Cat 226?

The Cat 216B3: Cat 216B3 1.502 m, Cat 226 1.513 m (turning radius from centre, machine rear), a 1% difference.

Which is narrower to transport, the Cat 216B3 or Cat 226?

The Cat 226: Cat 216B3 1.525 m, Cat 226 1.497 m (width over tyres), a 2% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.