Cat 226

Cat 226D3 (current D3 series, Cat C2.2 CRDI, U.S. EPA Tier 4 Final / EU Stage V) from spec sheet AEHQ8205-03 (07-2026) for North America, EU, APD and ANZP; no Middle East 226D3 sheet exists - Al-Bahar (UAE) sells the 226B3 instead - so these are not GCC figures.

UAEUSAGlobal

Rated operating capacity: 705 kg
power: 49.1 kW (65.8 hp)
Operating weight: 2,653 kg

Side

Front

Wheelbase: 1.054 m
Length without attachment: 2.524 m
Length with standard bucket: 3.234 m
Height with operator cab: 2.028 m
Operating height: 3.652 m
Height to bucket hinge pin: 2.818 m
Bucket pin height at carry position: 0.215 m
Dump reach at maximum height: 0.533 m
Dump height with standard bucket: 2.077 m
Ground clearance: 0.175 m
Angle of departure: 28°
Bumper overhang behind rear axle: 0.894 m
Dump angle at maximum height: 47°
Width over tyres: 1.497 m
Turning radius from centre, machine rear: 1.513 m
Turning radius from centre, coupler: 1.104 m
Turning radius with standard bucket: 1.977 m
Maximum reach with arms parallel to ground: 1.288 m
Rollback fully raised at maximum height: 89°

Dimensions

Standard bucket width: 1.576 m

Weight

Operating weight: 2,653 kg

Performance

Rated operating capacity: 705 kg
Rated operating capacity with optional counterweight: 750 kg
Tipping load: 1,410 kg
Tilt breakout force (tilt cylinder): 1,781 kgf
Top speed (one speed, forward or reverse): 12.3 km/h
Top speed (two-speed option) (forward or reverse): 17.8 km/h

Engine

Engine model: Cat C2.2 CRDI
Emissions: U.S. EPA Tier 4 Final / EU Stage V
Displacement: 2.2 L
Bore: 84 mm
Stroke: 100 mm
Gross power (SAE J1995): 50.1 kW (67.1 hp)
Net power (SAE 1349): 49.1 kW (65.8 hp)
Net power (ISO 9249): 49.6 kW (66.5 hp)
Max torque (at 1,500 rpm (SAE J1995)): 208 Nm

Hydraulics

Pump flow (standard flow, loader hydraulic flow): 69 L/min
Max pressure (loader hydraulic pressure, standard flow): 23 000 kPa
Hydraulic power (standard flow, calculated): 26.5 kW (35.5 hp)
Pump flow (high flow): 99 L/min
Max pressure (high flow) (high-flow option): 23 000 kPa
Hydraulic power (high flow) (high-flow option, calculated): 38 kW (50.9 hp)

Tyres

Tyres: Cat 10 × 16.5

Service capacities

Fuel tank: 57 L
Engine crankcase: 10 L
Hydraulic tank: 34 L
Hydraulic system, with tank: 45 L
Cooling system: 12 L
Chain box, each side: 7 L

Cab

ROPS: ISO 3471:2008
FOPS: ISO 3449:2005 Level I
Sound level, inside cab (ISO 6396:2008): 83 dB(A)
Sound level, outside cab (2000/14/EC): 102 dB(A)

Service intervals

Engine oil and filter: 500 hours
Air filter, primary and secondary: 500 hours
Fuel filters: 500 hours
Hydraulic oil filter: 1,000 hours
Drive chain oil: 1,000 hours
Hydraulic oil: 3,000 hours