Cat 226

Cat 226D3 (current D3 series, Cat C2.2 CRDI, U.S. EPA Tier 4 Final / EU Stage V) from spec sheet AEHQ8205-03 (07-2026) for North America, EU, APD and ANZP; no Middle East 226D3 sheet exists - Al-Bahar (UAE) sells the 226B3 instead - so these are not GCC figures.

UAEUSAGlobal

Rated operating capacity: 1,550 lb
power: 65.8 hp
Operating weight: 5,849 lb

Side

Front

Wheelbase: 41.5 in
Length without attachment: 99.4 in
Length with standard bucket: 127.3 in
Height with operator cab: 79.8 in
Operating height: 143.8 in
Height to bucket hinge pin: 110.9 in
Bucket pin height at carry position: 8.5 in
Dump reach at maximum height: 21.0 in
Dump height with standard bucket: 81.8 in
Ground clearance: 6.9 in
Angle of departure: 28°
Bumper overhang behind rear axle: 35.2 in
Dump angle at maximum height: 47°
Width over tyres: 58.9 in
Turning radius from centre, machine rear: 59.6 in
Turning radius from centre, coupler: 43.5 in
Turning radius with standard bucket: 77.8 in
Maximum reach with arms parallel to ground: 50.7 in
Rollback fully raised at maximum height: 89°

Dimensions

Standard bucket width: 62 in

Weight

Operating weight: 5,849 lb

Performance

Rated operating capacity: 1,550 lb
Rated operating capacity with optional counterweight: 1,650 lb
Tipping load: 3,100 lb
Tilt breakout force (tilt cylinder): 3,927 lb
Top speed (one speed, forward or reverse): 7.6 mph
Top speed (two-speed option) (forward or reverse): 11.1 mph

Engine

Engine model: Cat C2.2 CRDI
Emissions: U.S. EPA Tier 4 Final / EU Stage V
Displacement: 134.3 in³
Bore: 3.3 in
Stroke: 3.9 in
Gross power (SAE J1995): 67.1 hp
Net power (SAE 1349): 65.8 hp
Net power (ISO 9249): 66.5 hp
Max torque (at 1,500 rpm (SAE J1995)): 153 lbf-ft

Hydraulics

Pump flow (standard flow, loader hydraulic flow): 18 gal/min
Max pressure (loader hydraulic pressure, standard flow): 23 000 kPa
Hydraulic power (standard flow, calculated): 35.5 hp
Pump flow (high flow): 26 gal/min
Max pressure (high flow) (high-flow option): 23 000 kPa
Hydraulic power (high flow) (high-flow option, calculated): 50.9 hp

Tyres

Tyres: Cat 10 × 16.5

Service capacities

Fuel tank: 15.1 gal
Engine crankcase: 2.6 gal
Hydraulic tank: 9.0 gal
Hydraulic system, with tank: 11.9 gal
Cooling system: 3.2 gal
Chain box, each side: 1.8 gal

Cab

ROPS: ISO 3471:2008
FOPS: ISO 3449:2005 Level I
Sound level, inside cab (ISO 6396:2008): 83 dB(A)
Sound level, outside cab (2000/14/EC): 102 dB(A)

Service intervals

Engine oil and filter: 500 hours
Air filter, primary and secondary: 500 hours
Fuel filters: 500 hours
Hydraulic oil filter: 1,000 hours
Drive chain oil: 1,000 hours
Hydraulic oil: 3,000 hours