EF Logo

skid steer loadermade by CatUAE, USA, Global

Cat 246 (246D3)Specs, weight and dimensions

Rated operating capacity
1,000 kg
2,200 lb
Weight
3.39 t
3,392 kg
Est. new price
$48k-$60k

Quick answer

The Cat 246 is a 3.39-tonne skid steer loader with a Cat C3.3B DIT (turbo) engine rated at 53.6 kW (71.8 hp). It is rated for 1,000 kg. It suits site clean-up and moving material, loading small trucks and landscaping and grading. Its rivals include the Cat 262D3 (3.76 t) and the Bobcat S66 (3.27 t).

Cat 246 (illustration)

How much does a Cat 246 weigh?

The Cat 246 weighs 3.39 tonnes (3,392 kg, 7,478 lb) in working order, with fuel, operator and standard attachment. That is 10% lighter than the Cat 262D3 (3.76 t) and 4% heavier than the Bobcat S66 (3.27 t). The figures are from Cat 246D3 Skid Steer Loader spec sheet AEHQ8223 (08-2019), S Am / AME / CIS / APD-LRC.

What engine is in the Cat 246?

The Cat 246 has a Cat C3.3B DIT (turbo) engine rated at 53.6 kW (71.8 hp) net, SAE 1349. It displaces 3.3 L (203 in³) and makes 265 Nm (195 lbf-ft) of torque. The fuel tank holds 105 L (27.7 gal) and the engine takes 11 L (3.0 gal) of oil.

Cat fault codes

How much can a Cat 246 lift?

The Cat 246 is rated for 1,000 kg. In imperial units the rated operating capacity is 2,200 lb. On the same row of their sheets, the Cat 262D3 shows 1,225 kg and the Bobcat S66 shows 1,184 kg. The figures are from Cat 246D3 Skid Steer Loader spec sheet AEHQ8223 (08-2019), S Am / AME / CIS / APD-LRC.

What are the Cat 246 dimensions?

The Cat 246 is 3.71 m (12 ft 2 in) long, 1.68 m (5 ft 6 in) wide and 2.11 m (6 ft 11 in) high. By size it passes the door of a standard 20 ft shipping container. The Cat 262D3 is 3.71 m long, 1.68 m wide and 2.11 m high.

Cat 246 vs Cat 262D3: what is the difference?

The Cat 246 is 10% lighter than the Cat 262D3: 3.39 t against 3.76 t. The Cat 246 reaches further (1.388 m against 1.293 m) and dumps higher (2.465 m against 2.38 m). The Cat 262D3 has a higher rated capacity (1,225 kg against 1,000 kg), turns tighter (1.805 m against 1.806 m) and is lower to transport (4.008 m against 4.032 m).

These figures are for the Cat 246 (246D3). The 246D is not covered here and has figures of its own, so check the serial plate before using these for one.

Cat 246 dimensions

Cat 246, side view with dimensions (illustration)2.11 m1.25 m3.71 m
Side view
Cat 246, front view (illustration)1.68 m
Front view
Overall height
2.11 m
Wheelbase
1.25 m
Overall length
3.71 m
Overall width
1.68 m

Illustration; figures from the maker's sheet.

How big is the Cat 246?

Drawn to one scale from the maker’s dimension drawing, on one ground line.

Cat 246 drawn to scale beside a person and a pickup truck. The Cat 246 is 3.71 m long - 70% of a pickup truck's length - and 2.11 m tall, 1.2 times a person's height.Cat 2463.71 × 2.11 mPerson1.75 m tallPickup truck5.3 × 1.8 m
The Cat 246 is 3.71 m long - 70% of a pickup truck's length - and 2.11 m tall, 1.2 times a person's height.

Cat 246 specifications

Every figure is the maker's, with the document and page it came from. Sheet last updated 17 November 2026.

49 figures in 8 groups, each with its source

Dimensions

Dimensions, part 1 of 2
FigureValue (metric)Source
Wheelbase1.249 m[1] p.2
Length without attachment2.993 mwithout bucket[1] p.2
Length with standard bucket3.708 mbucket on ground[1] p.2
Height with operator cab2.11 mheight to top of cab[1] p.2
Operating height4.032 mmaximum overall height[1] p.2
Height to bucket hinge pin3.154 mat maximum lift[1] p.2
Bucket pin height at carry position0.2 m[1] p.2
Dump reach at maximum height0.6 mreach at maximum lift and dump[1] p.2
Dump height with standard bucket2.465 mclearance at maximum lift and dump[1] p.2
Ground clearance0.226 m[1] p.2
Dimensions, part 2 of 2
FigureValue (metric)Source
Angle of departure26°[1] p.2
Bumper overhang behind rear axle1.083 m[1] p.2
Dump angle at maximum height39°[1] p.2
Width over tyres1.676 mvehicle width over tires[1] p.2
Turning radius from centre, machine rear1.806 m[1] p.2
Turning radius from centre, coupler1.401 m[1] p.2
Turning radius with standard bucket2.181 mturning radius from centre - bucket[1] p.2
Maximum reach with arms parallel to ground1.388 m[1] p.2
Rollback fully raised at maximum height96°rack back angle at maximum height[1] p.2
Width with standard bucket1.676 mBucket width from the sheet footnote: 1676 mm (68 in) low profile bucket.[1] p.2

Weight

Weight
FigureValue (metric)Source
Operating weight3,392 kg[1] p.1

Performance

Performance, part 1 of 2
FigureValue (metric)Source
Rated operating capacity1,000 kg[1] p.1
Rated operating capacity with optional counterweight1,095 kg[1] p.1
Tipping load2,000 kg[1] p.1
Performance, part 2 of 2
FigureValue (metric)Source
Tilt breakout force3,336 kgf[1] p.1
Top speed12.5 km/hone speed, forward or reverse[1] p.1
Top speed (two-speed option)17.7 km/hforward or reverse[1] p.1

Engine

Engine, part 1 of 2
FigureValue (metric)Source
Engine modelCat C3.3B DIT (turbo)[1] p.1
Cylinders4Not printed in the sheet; follows from the printed displacement, bore and stroke (4 x 0.25*pi*bore^2*stroke).[1] p.1
Displacement3.3 L[1] p.1
Bore94 mm[1] p.1
Stroke120 mm[1] p.1
Engine, part 2 of 2
FigureValue (metric)Source
Gross power55.4 kW (74.3 hp)SAE J1995[1] p.1
Net power53.6 kW (71.8 hp)SAE 1349[1] p.1
Net power (ISO 9249)54.1 kW (72.6 hp)ISO 9249[1] p.1
Max torque265 Nmpeak torque at 1,600 rpm (SAE J1995)[1] p.1
Max torque speed1,600 rpm[1] p.1

Hydraulics

Hydraulics, part 1 of 2
FigureValue (metric)Source
Pump flow86 L/minstandard flow, loader hydraulic flow[1] p.1
Max pressure230 bar[1] p.1
Hydraulic power33 kW (44 hp)standard flow, calculated[1] p.1
Hydraulics, part 2 of 2
FigureValue (metric)Source
Pump flow (high flow)121 L/minHigh Flow XPS, maximum loader hydraulic flow[1] p.1
Max pressure (high flow)280 bar[1] p.1
Hydraulic power (high flow)57 kW (76 hp)High Flow XPS, calculated[1] p.1

Transmission

Transmission
FigureValue (metric)Source
TransmissionHydrostatic, four-wheel chain drive[1] p.3

Tyres

Tyres
FigureValue (metric)Source
TyresCat PC 12 × 16.5[1] p.2

Cab

Cab, part 1 of 2
FigureValue (metric)Source
ROPSISO 3471:2008[1] p.2
FOPSISO 3449:2005 Level I[1] p.2
Cab, part 2 of 2
FigureValue (metric)Source
Sound level, inside cab81 dB(A)ISO 6396:2008[1] p.2
Sound level, outside cab101 dB(A)2000/14/EC[1] p.2

Build: Cat 246D3 (D3 series, Cat C3.3B DIT turbo engine) from spec sheet AEHQ8223 (08-2019) for South America, Africa-Middle East, CIS and APD-LRC regions, linked by Al-Bahar (Cat dealer, UAE); one-speed, OROPS, standard-flow build with 1676 mm low profile bucket.

  1. [1]Cat 246D3 Skid Steer Loader spec sheet AEHQ8223 (08-2019), S Am / AME / CIS / APD-LRC
  2. [2]Al-Bahar (Cat dealer, UAE) 246D3 page - links the sheet above
  3. [3]Cat 246D3 spec sheet AEHQ8209-01 (North America)

Cat 246 service

What each system holds and when Cat says to change it, with genuine filters and oils. The oil grade for your build is in its operator's manual.

Loading the 3D machine...

Drag to turn · scroll to zoom · built from the maker's drawing; markers show where each system is

  1. Engine oil and filter, change every
    500 hours

    Fluid: Cat DEO-ULS (Cat D3 Series Skid Steer, Compact Track and Multi Terrain Loader Parts Reference Guide AEXQ (planned maintenance table))

    Dipstick, filler and filter are behind the rear door, at ground level.

    The 246D3's engine sits behind the cab with the hydrostatic pumps driven off it; dusty, worn-out oil wears both, so change it on the 500 hours, not late.

Confirm fluid grades in your machine's operator's manual: they vary by build year and climate.

Service capacities

Fuel tank
105 L27.7 gal
Engine oil, with filter
11 L3.0 gal
Hydraulic tank
39 L10.3 gal
Hydraulic system, with tank
52 L13.7 gal
Cooling system
14 L3.7 gal
Chaincase
12.7 L3.3 gal

Service intervals

Engine oil and filter
500 hours
Air filter, primary and secondary
500 hours
Fuel filters
500 hours
Hydraulic/hydrostatic filter
1,000 hours
Chaincase oil
1,000 hours
Hydraulic oil
3,000 hours

Cat 246 against its rivals

The skid steer loaders nearest in weight from other makers, figure by figure, each shown at the same scale.

Cat 246, Cat 262D3, Bobcat S66, Bobcat S76: specifications side by side
FigureCat 246this pageCat 262D3 specsBobcat S66 specsBobcat S76 specs
Operating weight3,392 kg3,763 kg3,271 kg3,744 kg
Gross power55.4 kW (74.3 hp)55.4 kW (74.3 hp)54.5 kW (73 hp)55.2 kW (74 hp)
Max torque265 Nm265 Nm266 Nm281 Nm
Maximum reach, arms parallel to ground1.388 m1.293 mnot on its sheetnot on its sheet
Dump height with standard bucket2.465 m2.38 m2.396 m2.526 m
Rated operating capacity1,000 kg1,225 kg1,184 kg1,361 kg
Pump flow86 L/min86 L/min67 L/min88 L/min
Fuel tank105 L105 L107.1 L120 L
Top speed12.5 km/h12.5 km/h11.8 km/h10.9 km/h
Every figureFull sheet

Underlined: the figure that leads its row. Weight has no better way, so it is never marked. All figures are the makers' own.

  • Pick the Cat 246 if you need longer reach (1.388 m).
  • Pick the Cat 262D3 if you want the heaviest of the 4 (3.76 t); it leads no other figure here.
  • Pick the Bobcat S66 if the lightest machine matters: at 3.27 t it weighs the least of the 4, and it leads no other figure here.
  • Pick the Bobcat S76 if you need more torque (281 Nm), a higher dump (2.526 m) and a higher rated capacity (1,361 kg).

Cat 246 prices and listings in the UAE

Asking prices on EquipmentsFinder, in AED, refreshed daily.

A new Cat 246 costs about $48,000 to $60,000 (USD), base machine before options, freight and tax - an estimate from published estimates, checked November 2026. Sources: equipbook.ai, compact.miltoncat.com.

Cat 246 on EquipmentsFinder in the UAE now: 1 listed for rent, none for sale. Too few carry a price to give a Cat 246 range, so the figure below is for all skid steer loaders.

See all 1

Typical hire, per daymedian of 10

AED 450 /day

No priced Cat 246 for hire yet: this is all skid steer loaders

Low AED 400High AED 650

Who is asking for skid steer loaders in the UAE

Contractors posted 30 requests for skid steer loaders on the EquipmentsFinder Inquiry Board in the last 12 months. Most were for Dubai (19), Abu Dhabi (9) and Sharjah (1). Requests name a kind of machine, not a model, so this counts every skid steer loader, the Cat 246 among them.

Requests, last 12 months
30
For Dubai
19
For Abu Dhabi
9
  • Bob Cat/Skid Steers Required For PurchaseDubai / 16 November 2026
  • BOB CAT/Skid Steers Required For RentAbu Dhabi / 16 November 2026
  • Sikd Steers/Bob Cat Required For PurchaseAbu Dhabi / 14 November 2026

Open skid steer loader requests on the Inquiry BoardPost a request for a Cat 246

Does a Cat 246 fit in a shipping container?

The machine as it stands on the sheet. Your haulier or forwarder confirms the load.

Yes, by size: at 3.71 m long, 1.68 m wide and 2.11 m high the Cat 246 passes the 2.34 m by 2.28 m door of a standard 20 ft container, which is 5.90 m long inside. Check its 3,392 kg against the payload on the container's plate.

Length
3.71 m
Width
1.68 m
Height
2.11 m
Weight
3.4 t

Container figures: door opening 2.34 m wide by 2.28 m high, 5.9 m inside a 20 ft box and 12.03 m inside a 40 ft one (Hapag-Lloyd container specification). A size check only: payload is on each container's plate. Trailer class and road permits depend on the haulier and the route, so they are not given here.

Tools for a Cat 246

For the people who run one: codes, charts and calculators that fit a skid steer loader.

Same class: Skid steers 2,000 to 3,000 lb

Skid steers 2,000 to 3,000 lb rated to lift 2,000 to 3,000 lb (907 to 1,361 kg), lowest-capacity first. The Cat 246 is 3 of 6; every figure is the maker's.

  1. 1Bobcat S570944 kg
  2. 2Bobcat S590998 kg
  3. 3Cat 246This page1,000 kg
  4. 4Bobcat S661,184 kg
  5. 5Cat 262D31,225 kg
  6. 6Bobcat S6501,282 kg

Popular Cat skid steer loader models

Cat 246 fault codes and serial number

All Cat fault codesFind the year from a Cat serial number

More Cat 246 questions

What is the tipping load of a Cat 246?

2,000 kg (4,400 lb): the safe working load is about half of it.

What is the Cat 246 lift height?

3.154 m (124.2 in) to the bucket hinge pin at full lift.

How much horsepower does the Cat 246 have?

71.8 hp (53.6 kW) net, SAE 1349.

How high can a Cat 246 dump?

2.465 m (97.1 in), clearance at maximum lift and dump.

How tall is a Cat 246?

2.11 m (6 ft 11 in) overall.

How wide is a Cat 246?

1.68 m (5 ft 6 in) overall.

How much torque does a Cat 246 have?

265 Nm (195 lbf-ft).

What is the hydraulic flow of a Cat 246?

86 L/min (23 gal/min), standard flow, loader hydraulic flow standard flow.

What are the Cat 246's main competitors?

The machines nearest it in size are the Bobcat S66, the Bobcat S76 and the Cat 262D3. Each has a side-by-side comparison on EquipmentsFinder.

Is the Cat 246 sold in the UAE?

Yes. The Cat 246 is sold in the UAE, the USA and other markets worldwide; builds can differ by market, so check emissions and options with the dealer.

What is a Cat 246 used for?

A skid steer loader: a compact loader that turns on the spot, small enough for tight sites and quick to switch between attachments. Typical jobs: site clean-up and moving material, loading small trucks, landscaping and grading, forks, augers, sweepers and breakers.

Embed this spec card

The Cat 246's key figures as a small card for your own page. Copy the code and paste it where the card should go; the card stays up to date with the sheet here.

<iframe src="https://www.equipmentsfinder.com/embed/models/cat-246" title="Cat 246 specs" width="100%" height="480" style="border:0;max-width:480px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/models/cat-246">Cat 246 specs</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>

Calculators and other cards to embed are in the embed kit.

Need a Cat 246 on site?

Post the job: where, when and for how long. Suppliers with a machine contact you directly. Free to post.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.