EF Logo

Hydraulic horsepower calculator

Work out the power in a hydraulic flow from flow rate and pressure, and the power the engine or motor must supply to the pump once efficiency is counted.

The formula

kW = L/min × bar ÷ 600. hp = gpm × psi ÷ 1,714. Input = hydraulic ÷ efficiency.

What it works out

Calculate the power in a hydraulic flow, and the shaft power the pump needs.

Why it matters

Size an engine or PTO for a pump, or see how much power an attachment draws.

How to use it

  1. Enter the Flow and choose litres per minute or US gallons per minute.
  2. Enter the Pressure and choose bar or psi. Use the working pressure, not the maximum.
  3. Set the Pump Overall Efficiency. 85% is a fair figure for a piston pump in good condition.
  4. Read Hydraulic Power in kW and hp, then Pump Input Power, the shaft power to drive the pump.

Quick reference

Printable chart

Power by flow (250 bar, 85% efficiency)

Flow (L/min)Hydraulic (kW)Pump input (kW)Pump input (hp)
5020.83 kW24.51 kW32.87 hp
10041.67 kW49.02 kW65.74 hp
15062.5 kW73.53 kW98.61 hp
20083.33 kW98.04 kW131.5 hp
250104.2 kW122.5 kW164.3 hp
300125 kW147.1 kW197.2 hp

Flow in L/min at 250 bar and 85% pump efficiency. Change the inputs above for your circuit.

The formula

Hydraulic power is flow × pressure. In metric units, kW = L/min × bar ÷ 600. In US units, hp = gpm × psi ÷ 1,714. The pump needs more than that at its shaft: input power = hydraulic power ÷ overall efficiency, where overall efficiency combines the volumetric and mechanical losses. Horsepower here is mechanical horsepower, 745.7 W.

Where the power goes

Power not turned into work becomes heat: a relief valve dumping flow at full pressure wastes the whole product of flow and pressure as heat in the oil. That is why a cooler is sized from the same figure, and why a load-sensing or variable pump saves fuel against a fixed-displacement one.

Sizing a drive

For an engine or PTO, take the input power for the highest flow and pressure the circuit uses together, add the other loads such as the fan and charge pump, and derate for altitude and heat. In Gulf summer, oil and engine temperatures rise, so leave margin rather than sizing to the exact figure.

Worked examples

  • An excavator pump circuit of 150 L/min at 250 bar carries 62.5 kW (83.81 hp); the pump shaft needs 73.53 kW.
  • A skid steer attachment circuit of 40 gpm at 3,000 psi is 70 hp, so the pump takes 79.55 hp at the shaft.
  • A gear pump giving 60 L/min at 180 bar and 80% efficiency delivers 18 kW and needs 22.5 kW to drive it.

Frequently asked questions

How do I calculate hydraulic horsepower?

Multiply the flow in gpm by the pressure in psi and divide by 1,714. In metric, L/min × bar ÷ 600 gives kW.

How many kW is 150 L/min at 250 bar?

About 62.5 kW of hydraulic power. The calculator above also adds the pump losses.

What pump efficiency should I use?

Gear pumps run about 80% overall and piston pumps 85 to 92%, falling as they wear. Use the manufacturer’s figure if you have it.

Is hydraulic horsepower the engine horsepower needed?

No. Engine power must also cover pump losses, the fan, and other drives, and it is derated for heat and altitude.

Why use 1,714 in the gpm and psi formula?

It is the unit conversion: 1 gpm at 1 psi is 1 ÷ 1,714 of a horsepower.

Add this calculator to your website

Copy the code and paste it into your page. The calculator is free and works as it does here.

<iframe src="https://www.equipmentsfinder.com/embed/field-tools/hydraulic-horsepower-calculator" title="Hydraulic horsepower calculator" width="100%" height="620" style="border:0;max-width:720px" loading="lazy"></iframe>
<p style="font-size:12px"><a href="https://www.equipmentsfinder.com/field-tools/hydraulic-horsepower-calculator">Hydraulic horsepower calculator</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.