The formula
Push = pressure × π/4 × bore². Pull = pressure × π/4 × (bore² − rod²).
What it works out
Work out how hard a hydraulic cylinder pushes and pulls at a given pressure.
Why it matters
Check a cylinder against the load, or compare two cylinders for a repair or an attachment.
How to use it
- Enter the Bore Diameter in mm: the inside diameter of the barrel, which is the piston diameter.
- Enter the Rod Diameter in mm. The rod must be smaller than the bore.
- Enter the Pressure and choose bar or psi. Use the pressure at the cylinder, not the relief setting.
- Read Push Force (extending) and Pull Force (retracting), each in kN, tonnes-force and lbf, with the two areas.
Quick reference
Printable chartCylinder force by bore (rod 45 mm, 210 bar)
| Bore (mm) | Push (kN) | Pull (kN) | Push (tf) |
|---|---|---|---|
| 63 | 65.46 kN | 32.06 kN | 6.68 tf |
| 80 | 105.6 kN | 72.16 kN | 10.76 tf |
| 100 | 164.9 kN | 131.5 kN | 16.82 tf |
| 125 | 257.7 kN | 224.3 kN | 26.28 tf |
| 160 | 422.2 kN | 388.8 kN | 43.06 tf |
| 200 | 659.7 kN | 626.3 kN | 67.27 tf |
Rod 45 mm and 210 bar for every row. Change the inputs above for your cylinder.
The formula
Force = pressure × area. Extending, the oil acts on the full piston: push = pressure × π/4 × bore². Retracting, it acts on the ring left around the rod: pull = pressure × π/4 × (bore² − rod²). With the area in mm² and the pressure in bar, force in kN is area × bar ÷ 10,000.
Why pull is always less than push
The rod takes up part of the piston area on the rod side, so the same pressure acts on less area. A thick rod on a small bore loses a lot: always check the retract force when a cylinder has to lift or break out a load as it retracts, as a boom or dozer blade cylinder often does.
What the figure does not include
The result is theoretical. Seal friction and back pressure from the return line take a few percent, and a long, slender rod must also be checked for buckling at full extension. For machine specs, use the pressure the relief valve allows at the cylinder port, less line losses, and keep the cylinder’s own rated pressure as the upper limit.
Worked examples
- A 100 mm bore cylinder with a 56 mm rod at 210 bar pushes with 164.9 kN (16.82 tf) and pulls with 113.2 kN (11.54 tf).
- A boom cylinder, 150 mm bore and 90 mm rod at 320 bar, pushes with 565.5 kN, which is 127,126 lbf, and pulls with 361.9 kN.
- A 3 in bore log-splitter style cylinder at 3,000 psi (76 mm bore, 45 mm rod) pushes with 93.83 kN, about 9.57 tf.
Frequently asked questions
How do I calculate hydraulic cylinder force?
Multiply the pressure by the piston area. For a 100 mm bore at 210 bar the push is about 165 kN. Use the calculator above for the exact figure and the pull force.
How many tons can a hydraulic cylinder push?
It depends on bore and pressure. Divide the kN result by 9.807 to get tonnes-force; the calculator shows it directly.
Why is the pull force lower than the push force?
Because the rod occupies part of the piston area on the retract side, so the oil acts on a smaller ring.
How do I convert psi to bar for the calculation?
Multiply psi by 0.0689476, or just pick psi in the Pressure Unit field and the calculator converts it.
Does the calculation include losses?
No. It gives the theoretical force. Expect a few percent less from seal friction and return-line pressure.
Add this calculator to your website
Copy the code and paste it into your page. The calculator is free and works as it does here.
<iframe src="https://www.equipmentsfinder.com/embed/field-tools/hydraulic-cylinder-force-calculator" title="Hydraulic cylinder force calculator" width="100%" height="620" style="border:0;max-width:720px" loading="lazy"></iframe> <p style="font-size:12px"><a href="https://www.equipmentsfinder.com/field-tools/hydraulic-cylinder-force-calculator">Hydraulic cylinder force calculator</a> by <a href="https://www.equipmentsfinder.com">EquipmentsFinder</a></p>
