J1939 · Air intake
SPN 730 Fault Code
Intake air heater 2
What does SPN 730 mean?
Second intake air heater for cold starts, switched on by the ECM through its own relay. How urgent it is depends on the FMI after SPN 730 - pick it below. Check first: with the key on, measure the voltage at the heater 2 relay output when heat is commanded.
- SPN 730
- Intake air heater 2
- FMI ?
- How it failed - the number after the SPN
Can I keep running with it?
Depends on the FMI
How urgent it is depends on the FMI after SPN 730 - pick it below.
What should I check first?
With the key on, measure the voltage at the heater 2 relay output when heat is commanded
Then 4 more checksWhere to read it
Connect a J1939-capable scan tool to the 9-pin diagnostic port.
Which FMI shows after SPN 730?
You'll notice: Cold starts are harder, with white smoke, mostly in winter, and the second heater stage may not work.
Find the number shown after SPN 730 on your display.
- 3SPN 730 FMI 3: Intake air heater 2 signal voltage is above normal, or the circuit is shorted to a high sourceShorted highMack MP8, Mack MP7, Volvo D13
- 4SPN 730 FMI 4: Intake air heater 2 signal voltage is below normal, or the circuit is shorted to a low sourceShorted lowMack MP8, Mack MP7, Volvo D13
- 5SPN 730 FMI 5: Current in the Intake air heater 2 circuit is below normal, or the circuit is openOpen circuitMack MP8, Mack MP7, Volvo D13
Checks
0 of 5 done
When to stop
Make the machine safe before you start: on firm level ground, attachments down, key out.
How urgent SPN 730 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Causes
- Heater element or power cable failed
- Relay for heater 2 failing to close
- Control wire damaged
- Fuse blown
Other Air intake codes
Source
Mack MP8 2010-2013 fault code list (Diesel Laptops)
This list names SPN 730 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.
The source covers: Mack MP7, Mack MP8, Volvo D13; same SPN on other J1939 engines.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
