J1939 · Cooling
SPN 5927 Fault Code
Water pump limp-home mode
What does SPN 5927 mean?
The electric water pump has dropped into a reduced limp-home mode after a fault. How urgent it is depends on the FMI after SPN 5927 - pick it below. Check first: read the pump status and any pump-specific code in the service tool.
- SPN 5927
- Water pump limp-home mode
- FMI ?
- How it failed - the number after the SPN
Can I keep running with it?
Depends on the FMI
How urgent it is depends on the FMI after SPN 5927 - pick it below.
What should I check first?
Read the pump status and any pump-specific code in the service tool
Then 4 more checksWhere to read it
Connect a J1939-capable scan tool to the 9-pin diagnostic port.
Which FMI shows after SPN 5927?
You'll notice: Cooling capacity is reduced, so the engine may run hot under load and derate.
Find the number shown after SPN 5927 on your display.
- 2SPN 5927 FMI 2: Water pump limp-home mode data is erratic, intermittent or incorrectErratic or implausibleDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5
- 7SPN 5927 FMI 7: The Water pump limp-home mode is not responding or is out of adjustmentPart or controllerDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5
Checks
0 of 5 done
When to stop
Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.
How urgent SPN 5927 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Causes
- Pump electronics fault
- Blocked impeller
- Low coolant level
- Supply voltage low
Other Cooling codes
Source
Detroit Diesel DD15 2017-2020 fault codes list (Diesel Laptops)
This list names SPN 5927 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.
The source covers: Detroit DD13, Detroit DD15; same SPN on other J1939 engines.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
