EF Logo

J1939 · Cooling

SPN 4814 Fault Code

Coolant pump speed

What does SPN 4814 mean?

Speed of the electrically driven coolant pump, which the ECM commands for cooling and warm-up. How urgent it is depends on the FMI after SPN 4814 - pick it below. Check first: measure the pump supply and control voltage at its connector with the key on.

FaultActiveSPN 4814FMI --J1939 engine ECU
SPN 4814
Coolant pump speed
FMI ?
How it failed - the number after the SPN

Can I keep running with it?

Depends on the FMI

How urgent it is depends on the FMI after SPN 4814 - pick it below.

What should I check first?

Measure the pump supply and control voltage at its connector with the key on

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Which FMI shows after SPN 4814?

You'll notice: Coolant flow may be too low or too high, so the engine runs hot or takes longer to warm up.

Find the number shown after SPN 4814 on your display.

  • 1SPN 4814 FMI 1: Coolant pump speed is below the normal range, most severe levelReal conditionPACCAR MX-13
  • 3SPN 4814 FMI 3: Coolant pump speed signal voltage is above normal, or the circuit is shorted to a high sourceShorted highDetroit DD15, Detroit DD13 Gen 5, Detroit DD15 Gen 5
  • 4SPN 4814 FMI 4: Coolant pump speed signal voltage is below normal, or the circuit is shorted to a low sourceShorted lowDetroit DD15, Detroit DD13 Gen 5, Detroit DD15 Gen 5
  • 5SPN 4814 FMI 5: Current in the Coolant pump speed circuit is below normal, or the circuit is openOpen circuitDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5
  • 18SPN 4814 FMI 18: Coolant pump speed is below the normal range, moderately severe levelReal conditionPACCAR MX-13

Checks

0 of 5 done

When to stop

Lower attachments to the ground and relieve hydraulic pressure before loosening any fitting. Never feel for a leak with your hand - oil under pressure can inject through skin.

How urgent SPN 4814 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Causes

  • Pump motor winding open
  • Driver wire shorted
  • Pump impeller blocked by debris
  • Seized bearing

Source

PACCAR MX-13 2017-2020 fault codes list (Diesel Laptops)

This list names SPN 4814 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.

The source covers: Detroit DD13, Detroit DD15, PACCAR MX-13; same SPN on other J1939 engines.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.