J1939 · Aftertreatment - SCR/DEF
SPN 5246 FMI 16
SCR operator inducement, high
What does SPN 5246 FMI 16 mean?
The aftertreatment system has triggered an operator inducement at the high level. Power is limited and a speed limit may follow if the cause is not repaired. Urgency: check soon - the machine may derate or limit a function. Check first: check the DEF level and refill with certified DEF if the tank is low.
- FMI 16
- Above normal, moderately severe
Can I keep running with it?
Check soon
The machine may derate or limit a function. Find the cause before the next shift.
What should I check first?
Check the DEF level and refill with certified DEF if the tank is low
Then 4 more checksWhere to read it
Connect a J1939-capable scan tool to the 9-pin diagnostic port.
Checks
0 of 5 done
Causes
- Low DEF level
- Poor quality DEF
- SCR fault such as a blocked doser
- NOx sensor fault
How it failed
You'll notice: The aftertreatment system has triggered operator inducement at the high level.
Real conditionRead from FMI 16: above normal, moderately severe
The sensor reading is valid but outside the allowed range - the problem may be real.
- Meter test
- Check the real value with a separate gauge or thermometer before blaming the sensor.
- Good result
- If the gauge agrees with the display, fix the machine, not the sensor.
When to stop
Tilt, load and interlock cutouts are what keep a lift or telehandler from tipping. Never bypass or bridge one to keep working; get the fault found before anyone goes up or lifts again.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Other SPN 5246 codes
Source
Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)
This list shows SPN 5246 with FMI 16. The guidance on this page is general, not taken from it.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
