EF Logo

J1939 · Air intake

SPN 1636 Fault Code

Engine intake manifold 1 air temperature

What does SPN 1636 mean?

Temperature of air in the intake manifold after the charge air cooler, read by a manifold sensor. The ECM uses it for fuelling, boost and cooler-performance checks. How urgent it is depends on the FMI after SPN 1636 - pick it below. Check first: compare the manifold air temperature with ambient after a cold soak.

FaultActiveSPN 1636FMI --J1939 engine ECU
SPN 1636
Engine intake manifold 1 air temperature
FMI ?
How it failed - the number after the SPN

Can I keep running with it?

Depends on the FMI

How urgent it is depends on the FMI after SPN 1636 - pick it below.

What should I check first?

Compare the manifold air temperature with ambient after a cold soak

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Which FMI shows after SPN 1636?

You'll notice: Intake manifold air temperature is misread or really high, so the ECM may cut power and trim fuel: you notice weak power on hot days and a check lamp.

Find the number shown after SPN 1636 on your display.

  • 3SPN 1636 FMI 3: Intake manifold temperature circuit reads highShorted highDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5
  • 4SPN 1636 FMI 4: Intake manifold temperature circuit reads lowShorted lowDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5
  • 10SPN 1636 FMI 10: Intake manifold temperature shows a signal spikeErratic or implausibleDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5
  • 14SPN 1636 FMI 14: Intake manifold temperature sensor signal is not plausibleErratic or implausibleDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5
  • 20SPN 1636 FMI 20: Intake manifold temperature has drifted lowErratic or implausibleDetroit DD15
  • 21SPN 1636 FMI 21: Intake manifold temperature has drifted highErratic or implausibleDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5
  • 31SPN 1636 FMI 31: Intake manifold temperature sensor has drifted within its rangeReal conditionDetroit DD13 Gen 5, Detroit DD15 Gen 5

Checks

0 of 5 done

When to stop

Let the engine cool before opening the cooling system; a hot cap releases scalding coolant. Running on with an overheat warning risks a head gasket or seized engine.

How urgent SPN 1636 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Causes

  • Circuit (reads cold): open wire or unplugged sensor at the manifold
  • Circuit (reads hot): signal wire shorted to ground or a shorted sensor
  • Charge air cooler fouled or leaking, so real intake temperature is high
  • Hot air recirculating from the radiator or engine bay into the intake

Source

Detroit Diesel DD15 2017-2020 fault codes list (Diesel Laptops)

This list names SPN 1636 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.

The source covers: Detroit DD13 and DD15 (2017-2020); same SPN on other J1939 engines.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.