J1939 · Fuel system
SPN 97 FMI 16
Water in fuel high, moderately severe
What does SPN 97 FMI 16 mean?
The water-in-fuel sensor reports water above its limit. Water ruins the high-pressure pump and injectors, so drain and fix the source promptly. Urgency: check soon - the machine may derate or limit a function. Check first: drain the filter bowl into a clear container and look for water.
- SPN 97
- Water in fuel indicator
- FMI 16
- Above normal, moderately severe
Can I keep running with it?
Check soon
The machine may derate or limit a function. Find the cause before the next shift.
What should I check first?
Drain the filter bowl into a clear container and look for water
Then 4 more checksWhere to read it
Connect a J1939-capable scan tool to the 9-pin diagnostic port.
Checks
0 of 5 done
Causes
- Water collected in the primary filter bowl and not drained at the interval
- Contaminated fuel supply from the last fill
- Sensor in the bowl coated with residue, giving a false reading
- Condensation in a part-empty tank in humid weather
How it failed
You'll notice: The water-in-fuel sensor reports water above its limit at the moderately severe level, so the dash warns you to drain.
Real conditionRead from FMI 16: above normal, moderately severe
The sensor reading is valid but outside the allowed range - the problem may be real.
- Meter test
- Check the real value with a separate gauge or thermometer before blaming the sensor.
- Good result
- If the gauge agrees with the display, fix the machine, not the sensor.
When to stop
Common-rail fuel runs at very high pressure. Never open a high-pressure line or fitting with the engine running or just after it stops - a fine fuel jet can pierce skin.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Other SPN 97 codes
Source
Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)
This list shows SPN 97 with FMI 16. The guidance on this page is general, not taken from it.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
