J1939 · Electrical
SPN 524 Fault Code
Transmission selected gear
What does SPN 524 mean?
The gear the transmission controller has selected, broadcast in the ETC2 message. The engine ECM uses it for torque limiting and gear-dependent functions. How urgent it is depends on the FMI after SPN 524 - pick it below. Check first: check that the transmission controller has power and ground with the key on.
- SPN 524
- Transmission selected gear
- FMI ?
- How it failed - the number after the SPN
Can I keep running with it?
Depends on the FMI
How urgent it is depends on the FMI after SPN 524 - pick it below.
What should I check first?
Check that the transmission controller has power and ground with the key on
Then 4 more checksWhere to read it
Connect a J1939-capable scan tool to the 9-pin diagnostic port.
Which FMI shows after SPN 524?
You'll notice: The transmission selected-gear message is missing or invalid, so the engine cannot see which gear is engaged.
Find the number shown after SPN 524 on your display.
- 9SPN 524 FMI 9: The ETC2 transmission message is missingLost messageDetroit DD15, Detroit DD13
- 19SPN 524 FMI 19: The ETC2 message from the transmission arrived with bad or out-of-range selected-gear dataLost messagePACCAR MX-13
Checks
0 of 5 done
When to stop
Make the machine safe before you start: on firm level ground, attachments down, key out.
How urgent SPN 524 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Causes
- Transmission controller not sending the message because of a power or ground fault
- Data link wiring fault between the transmission and the engine ECM
- Gear position sensor in the transmission faulty
- Transmission controller needs a software update or has failed
Other Electrical codes
Source
Detroit Diesel DD15 2017-2020 fault codes list (Diesel Laptops)
This list names SPN 524 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.
The source covers: Detroit DD13 and DD15 (2017-2020); same SPN on other J1939 engines.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
