EF Logo

Bobcat · Hydraulics

Bobcat Fault Code M0710

Hydraulic oil temperature too high

What does Bobcat code M0710 mean?

Hydraulic oil is running hotter than normal. Ease off the work and let the machine cool while you look for the cause. Urgency: check soon - the machine may derate or limit a function. Check first: check that the cooling fan turns freely and that the drive belt is tight and not glazed.

FaultCheckM0710Bobcat · Hydraulics

Can I keep running with it?

Check soon

The machine may derate or limit a function. Find the cause before the next shift.

What should I check first?

Check that the cooling fan turns freely and that the drive belt is tight and not glazed

Then 3 more checks
Code shows hereFAULTM0710

Where this code shows

On touchscreen R-series machines, touch the screen and pick Service Codes from the menu.

Checks

0 of 4 done

Causes

  • Cooler fan not turning or belt slipping
  • Relief valve working constantly because of a stuck function
  • Hot ambient with heavy continuous load
  • Low hydraulic oil level

How it failed

You'll notice: The hydraulic oil temperature warning is showing.

Real conditionRead from how the source describes the code

The sensor reading is valid but outside the allowed range - the problem may be real.

allowed rangetime
The reading against the band the controller allows.
Meter test
Check the real value with a separate gauge or thermometer before blaming the sensor.
Good result
If the gauge agrees with the display, fix the machine, not the sensor.

When to stop

Lower attachments to the ground and relieve hydraulic pressure before loosening any fitting. Never feel for a leak with your hand - oil under pressure can inject through skin.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Same part, other failures: Hydraulic oil and case drain temperatures

1 other code on this part is also real condition (VSE001-00). When they show together, start at the wiring and connector they share.

Show the other 16 codes
All 25 Hydraulic oil and case drain temperatures codes on one page

Source

Bobcat Service Code List (rev. 10-20, M-Series/R-Series loaders and M-Series excavators)

This source lists M0710 and its meaning. The guidance on this page is general, not taken from it.

The source covers: M-Series loaders (S450-S850, T450-T870) and M-Series excavators (E26-E85).

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.