EF Logo

Komatsu PC360LC-11 vs Komatsu PC400

The Komatsu PC400 is the heavier machine, at 42.7 t against 36.5 t, and the Komatsu PC400 has more power (257 kW against 192 kW).

The Komatsu PC360LC-11 is ahead on: turns tighter, narrower to transport, lower to transport. The Komatsu PC400 is ahead on: more power, digs deeper, reaches further, dumps higher, bigger bucket or body, more digging or pushing force, more hydraulic flow, bigger fuel tank.

Below, every figure both makers publish sits side by side, with the Komatsu PC360LC-11 and the Komatsu PC400 drawn to the same scale from their dimension drawings.

  1. Komatsu PC360LC-11, side view

    Komatsu · excavator

    Komatsu PC360LC-11

    Full specsPDF

  2. Komatsu PC400, side view

    Komatsu · excavator

    Komatsu PC400

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureKomatsu PC360LC-11Komatsu PC400
Operating weight36,490 kg42,740 kg
Gross powerHigher is better202 kW270 kW+34%
Max digging depthHigher is better7.38 m7.82 m+6%
Max digging reachHigher is better11.1 m12.025 m+8%
Max dumping heightHigher is better7.11 m7.565 m+6%
Bucket capacityHigher is better1.8 m³1.9 m³+6%
Bucket digging forceHigher is better200 kN275 kN+38%
Pump flowHigher is better535 L/min690 L/min+29%
Fuel tankHigher is better605 L650 L+7%
Tail swing radiusLower is better3.445 m+5%3.645 m
Overall widthLower is better3.19 m+7%3.44 m
Overall height (to top of boom)Lower is better3.285 m+10%3.635 m
Overall length11.145 m11.94 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Overall length11.145 m11.94 mone-piece boom with 3,380 mm arm
Length on ground (transport)5.935 m6.705 mPC400LC-8R; 6,540 mm on the PC400-8R
Overall height (to top of boom)3.285 mWith 3200 mm arm3.635 mwith 3,380 mm arm, including grouser height
Overall width3.19 m3.44 m700 mm shoes; 3,430 mm on the PC400-8R
Overall height (to top of cab)3.16 m3.285 mincluding grouser height
Ground clearance, counterweight1.185 m1.32 m
Ground clearance (minimum)0.498 m0.55 m555 mm on the PC400-8R
Tail swing radius3.445 m3.645 m
Ground contact length4.03 m4.35 m4,020 mm on the PC400-8R
Track length4.955 m5.385 m5,055 mm on the PC400-8R
Track gauge2.59 m2.74 m
Width of crawler3.19 m3.44 m3,340 mm on the PC400-8R
Shoe width0.6 m0.7 mtriple grouser; 600 mm and 800 mm also listed
Grouser height0.036 m0.037 m
Distance, swing centre to rear end3.405 m3.605 m

Working range

Max digging height10.21 m10.915 m3,380 mm arm; 10,310 mm with the 2,400 mm arm
Max dumping height7.11 m7.565 m
Max digging depth7.38 m7.82 m
Max vertical wall digging depth6.48 m6.87 m
Max depth cut for 2,440 mm level bottom7.18 m7.68 m
Max digging reach11.1 m12.025 m
Max reach at ground level10.92 m11.82 m
Min front swing radius4.31 m4.735 m

Performance

Bucket capacity1.8 m³SAE heaped, KGA 1700 mm general purpose bucket; KGA bucket options run 0.53-1.80 m3 (p.26)1.9 m³SAE heaped; 1.7 m3 CECE; the range runs 1.3 to 2.8 m3
Bucket digging force200 kNSAE rating, at power max; 20,400 kg275 kNISO, at power max, 3,380 mm arm
Arm digging force165 kNSAE arm crowd force, at power max; 16,800 kg214 kNISO arm crowd force, at power max, 3,380 mm arm
Swing speed9.5 min-19.1 rpm
Top speed5.5 km/hAuto-shift; Mid 4.2 km/h, Low 3.2 km/h5.5 km/hauto-shift
Travel speed (low)3.2 km/hAuto shift low3 km/h
Max drawbar pull290 kN29,570 kgf330 kN33,700 kgf
Gradeability35°70%35°70%

Weight

Operating weight36,490 kg600 mm triple-grouser shoes; 6500 mm HD boom, 3200 mm HD arm, KGA dual-lock quick hitch, SAE heaped 1.80 m3 bucket, full fuel tank and operator42,740 kgPC400LC-8R, 700 mm triple-grouser shoes, 7,060 mm one-piece boom, 3,380 mm arm, 1.9 m3 SAE heaped bucket
Ground pressure0.69 kg/cm2600 mm shoes63.5 kPa (0.65 kgf/cm²)700 mm shoes; 73.3 kPa with 600 mm, 56.2 kPa with 800 mm
Counterweight6,920 kg9,220 kgStandard equipment list

Engine

Engine modelKomatsu SAA6D114E-6Komatsu SAA6D125E-5
TypeWater-cooled, 4-cycle, direct injectionWater-cooled, 4-cycle, direct injection
AspirationVariable geometry turbocharged, aftercooled, cooled EGRTurbocharged, aftercooled
EmissionsNon-Tier 4 engine fittedNon-Tier 4 specification of the PC360LC-11M0EPA Tier 2 and EU Stage 2 equivalent
Cylinders66
Bore x stroke114 mm x 144.5 mm125 mm x 150 mm
Displacement8.9 L11 L
Gross power202 kW (271 HP)SAE J1995, at 1950 min-1270 kW (362 hp)SAE J1995, at 1,900 rpm
Net power192 kW (257 HP)ISO 9249 / SAE J1349, at 1950 min-1257 kW (345 hp)ISO 9249 / SAE J1349, at 1,900 rpm
Rated speed1950 min-11,900 rpm
GovernorAll-speed control, electronicAll-speed control, electronic
Fan driveMechanicalMechanical

Hydraulics

SystemHydrauMind closed-centre load-sensing system with pressure-compensated valves; 6 working modesHydrauMind closed-centre load-sensing system with pressure-compensated valves; 4 working modes
Main pumpVariable displacement axial piston typeBoom, arm, bucket, swing and travel circuitsVariable-displacement piston type, for boom, arm, bucket, swing and travel circuits
Pump flow535 L/min690 L/minmaximum
Max pressure37.3 MPa (380 kgf/cm2)37.3 MPa (380 kgf/cm²)relief valve setting
Max pressure, travel37.3 MPa (380 kgf/cm2)37.3 MPa (380 kgf/cm²)relief valve setting
Max pressure, swing27.9 MPa (285 kgf/cm2)Relief valve setting27.9 MPa (285 kgf/cm²)relief valve setting
Pilot circuit pressure3.2 MPa (33 kgf/cm2)3.2 MPa (33 kgf/cm²)
Boom cylinders2 x 140 mm bore x 1480 mm stroke x 100 mm rod2 x 160 mm bore x 1,570 mm stroke x 110 mm rod
Arm cylinder1 x 160 mm bore x 1825 mm stroke x 110 mm rod1 x 185 mm bore x 1,820 mm stroke x 120 mm rod1,590 mm stroke with the 2,400 mm arm
Bucket cylinder1 x 140 mm bore x 1285 mm stroke x 100 mm rod1 x 160 mm bore x 1,270 mm stroke x 110 mm rod

Undercarriage

Center frameX-frameX-frame
Track frameBox-sectionBox-section
Track sealSealedSealed
Track adjusterHydraulicHydraulic
Track shoes (each side)484946 on the PC400-8R
Track rollers (each side)887 on the PC400-8R
Carrier rollers (each side)22
Swing reductionPlanetary gearPlanetary gear
Swing circle lubricationGrease-bathedGrease-bathed
Service brakeHydraulic lockHydraulic lock
Parking brakeMechanical disc brakeMechanical disc brake

Service capacities

Fuel tank605 L650 L
Cooling system37 LRadiator36 L
Engine oil, with filter35 L37 L
Final drive (each)9 L10.5 L
Swing drive13.7 L20 L
Hydraulic tank188 L248 L

Service intervals

Engine oil and filter500 hours500 hours
Hydraulic oil5,000 hours5,000 hours
Hydraulic oil filter1,000 hours1,000 hours

Sources: Komatsu PC360LC-11M0 / PC360LCi-11M0 brochure, Australia & New Zealand specifications (komatsu.com) · Komatsu PC400-8R / PC400LC-8R brochure, dealer-hosted copy

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m4 m5 m6 m7 m8 m9 m10 m11 m
Komatsu PC360LC-11Komatsu PC400Same scale, front edges and ground lined up.

Komatsu PC360LC-11 vs Komatsu PC400: questions

Which is bigger, the Komatsu PC360LC-11 or Komatsu PC400?

By operating weight the Komatsu PC400 is the biggest at 42.7 t, then the Komatsu PC360LC-11 at 36.5 t.

Which has more power, the Komatsu PC360LC-11 or Komatsu PC400?

The Komatsu PC400: Komatsu PC360LC-11 202 kW (271 HP), Komatsu PC400 270 kW (362 hp) (gross power), a 34% difference.

Which digs deeper, the Komatsu PC360LC-11 or Komatsu PC400?

The Komatsu PC400: Komatsu PC360LC-11 7.38 m, Komatsu PC400 7.82 m (max digging depth), a 6% difference.

Which reaches further, the Komatsu PC360LC-11 or Komatsu PC400?

The Komatsu PC400: Komatsu PC360LC-11 11.1 m, Komatsu PC400 12.025 m (max digging reach), a 8% difference.

Which has the bigger bucket, the Komatsu PC360LC-11 or Komatsu PC400?

The Komatsu PC400: Komatsu PC360LC-11 1.8 m³, Komatsu PC400 1.9 m³ (bucket capacity), a 6% difference.

Which has the bigger fuel tank, the Komatsu PC360LC-11 or Komatsu PC400?

The Komatsu PC400: Komatsu PC360LC-11 605 L, Komatsu PC400 650 L (fuel tank), a 7% difference.

Which turns tighter, the Komatsu PC360LC-11 or Komatsu PC400?

The Komatsu PC360LC-11: Komatsu PC360LC-11 3.445 m, Komatsu PC400 3.645 m (tail swing radius), a 5% difference.

Which is narrower to transport, the Komatsu PC360LC-11 or Komatsu PC400?

The Komatsu PC360LC-11: Komatsu PC360LC-11 3.19 m, Komatsu PC400 3.44 m (overall width), a 7% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.