EF Logo

J1939 · EGR

SPN 3058 Fault Code

Engine exhaust gas recirculation system

What does SPN 3058 mean?

An overall check of how the EGR system is performing, such as flow response to commanded valve moves. The ECM uses it to detect a stuck, slow or leaking EGR path. How urgent it is depends on the FMI after SPN 3058 - pick it below. Check first: command the EGR valve and watch how fast the flow reading responds.

FaultActiveSPN 3058FMI --J1939 engine ECU
SPN 3058
Engine exhaust gas recirculation system
FMI ?
How it failed - the number after the SPN

Can I keep running with it?

Depends on the FMI

How urgent it is depends on the FMI after SPN 3058 - pick it below.

What should I check first?

Command the EGR valve and watch how fast the flow reading responds

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Which FMI shows after SPN 3058?

You'll notice: The EGR system cannot reach or hold its target flow, so the ECM limits EGR and may derate.

Find the number shown after SPN 3058 on your display.

  • 9SPN 3058 FMI 9: EGR flow response is too slowLost messageDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5
  • 10SPN 3058 FMI 10: EGR response is too slow to commanded changesErratic or implausibleDetroit DD15, Detroit DD13, Detroit DD13 Gen 5, Detroit DD15 Gen 5
  • 15SPN 3058 FMI 15: EGR control cannot reach its targetReal conditionPACCAR MX-13
  • 16SPN 3058 FMI 16: Value is above the normal range, moderately severe levelReal conditionCummins ISX15
  • 18SPN 3058 FMI 18: Value is below the normal range, moderately severe levelReal conditionCummins ISX15
  • 20SPN 3058 FMI 20: EGR flow rises too slowly after an increase is commandedErratic or implausiblePACCAR MX-13
  • 21SPN 3058 FMI 21: EGR flow falls too slowly after a decrease is commandedErratic or implausiblePACCAR MX-13

Checks

0 of 5 done

When to stop

Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.

How urgent SPN 3058 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Causes

  • EGR valve slow or stuck from soot, so flow does not follow the command
  • EGR cooler or pipes partly blocked, restricting flow
  • Delta-P sensor or hoses fouled, giving a false flow reading
  • Boost or exhaust pressure problem that changes the EGR driving pressure

Source

Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)

This list names SPN 3058 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.

The source covers: Cummins ISX15 (2013-2018) and X15; same SPN on other J1939 engines.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.