EF Logo

J1939 · Engine speed/timing

SPN 1569 FMI 31

Engine protection torque derate - condition exists

What does SPN 1569 FMI 31 mean?

The ECM is cutting torque to protect the engine. This is a result code, so another fault such as coolant, oil, fuel or aftertreatment caused it, and fixing that clears the derate. Urgency: check soon - the machine may derate or limit a function. Check first: read all active and stored faults and fix the first one.

FaultCheckSPN 1569FMI 31J1939 engine ECU
FMI 31
Condition exists

Can I keep running with it?

Check soon

The machine may derate or limit a function. Find the cause before the next shift.

What should I check first?

Read all active and stored faults and fix the first one

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Checks

0 of 5 done

Causes

  • Another active protection fault such as oil, coolant or fuel
  • Aftertreatment fault leading to a derate
  • Fuel supply fault limiting power
  • Coolant or oil limit reached

How it failed

You'll notice: The ECM is cutting torque to protect the engine, so power drops and a lamp shows; this is a result code and the real fault is stored alongside it.

Real conditionRead from FMI 31: condition exists

The sensor reading is valid but outside the allowed range - the problem may be real.

allowed rangetime
The reading against the band the controller allows.
Meter test
Check the real value with a separate gauge or thermometer before blaming the sensor.
Good result
If the gauge agrees with the display, fix the machine, not the sensor.

When to stop

Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.

Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Source

Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)

This list shows SPN 1569 with FMI 31. The guidance on this page is general, not taken from it.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.