EF Logo

J1939 · EGR

SPN 5019 Fault Code

Engine EGR outlet pressure

What does SPN 5019 mean?

Gas pressure at the EGR system outlet, read by a sensor after the cooler or valve. The ECM uses it to calculate flow and valve control. How urgent it is depends on the FMI after SPN 5019 - pick it below. Check first: read the EGR outlet pressure at key on, engine off; it should be near ambient.

FaultActiveSPN 5019FMI --J1939 engine ECU
SPN 5019
Engine EGR outlet pressure
FMI ?
How it failed - the number after the SPN

Can I keep running with it?

Depends on the FMI

How urgent it is depends on the FMI after SPN 5019 - pick it below.

What should I check first?

Read the EGR outlet pressure at key on, engine off; it should be near ambient

Then 4 more checks
Plug the service tool in hereDiagnosticport, 9-pin

Where to read it

Connect a J1939-capable scan tool to the 9-pin diagnostic port.

Which FMI shows after SPN 5019?

You'll notice: EGR outlet pressure is misread, so the ECM cannot judge EGR flow: expect an EGR fault, possible derate and rough running at low load.

Find the number shown after SPN 5019 on your display.

  • 2SPN 5019 FMI 2: Data is erratic, intermittent or incorrectErratic or implausibleCummins ISX15
  • 3SPN 5019 FMI 3: Signal voltage is above normal, or the circuit is shorted to a high sourceShorted highCummins ISX15
  • 4SPN 5019 FMI 4: Signal voltage is below normal, or the circuit is shorted to a low sourceShorted lowCummins ISX15

Checks

0 of 5 done

When to stop

Repeated aftertreatment faults lead to an engine derate. Parked regenerations and dosing tests are run with the service tool; do not remove or bypass DPF or SCR parts.

How urgent SPN 5019 is depends on its FMI and whether the engine has derated. Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.

Causes

  • Sensor wiring fault: open, shorted or heat-damaged connector at the EGR outlet sensor
  • Sensing line or port blocked with soot
  • Sensor failed from heat and condensate
  • Exhaust or EGR pipe leak changing the real pressure

Source

Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)

This list names SPN 5019 and the FMIs above for the engines it covers. The guidance on this page is general, not taken from it.

The source covers: Cummins ISX15 (2013-2018) and X15; same SPN on other J1939 engines.

Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.

Machine down?

Get a replacement machine or a technician - suppliers in the UAE contact you.

Post a request
EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.