J1939 · Cooling
SPN 110 FMI 2
Coolant temperature erratic
What does SPN 110 FMI 2 mean?
The coolant temperature sensor data jumps around or disagrees with related readings, so the ECM flags it erratic. Urgency: check soon - the machine may derate or limit a function. Check first: watch the coolant temperature sensor live in the service tool at steady load; a reading that jumps while the real value is steady confirms an erratic signal.
- SPN 110
- Engine coolant temperature
- FMI 2
- Erratic or incorrect data
Can I keep running with it?
Check soon
The machine may derate or limit a function. Find the cause before the next shift.
What should I check first?
Watch the coolant temperature sensor live in the service tool at steady load; a reading that jumps while the real value is steady confirms an erratic signal
Then 4 more checksWhere to read it
Connect a J1939-capable scan tool to the 9-pin diagnostic port.
Checks
0 of 5 done
Causes
- Loose or fretted pin in the coolant temperature sensor connector, giving a reading that jumps with vibration
- Harness rubbing at a bracket near the coolant temperature sensor, giving an intermittent short or open
- Air pocket or low coolant leaving the sensor tip dry, so the reading jumps as coolant sloshes
- Sensor thread seal weeping, letting the reading jump with pressure
How it failed
You'll notice: The temperature gauge reads cold or pegs hot, the radiator fan may run all the time or never, and the ECM can derate or shut the engine down on a false overheat reading.
Erratic or implausibleRead from FMI 2: erratic or incorrect data
The reading jumps, drifts or disagrees with the sensors around it.
- Meter test
- Watch the live value on the service tool while you flex the harness and tap the connector.
- Good result
- A steady value that tracks the real condition. A jump while flexing is the loose pin or wire.
When to stop
Let the engine cool before opening the cooling system; a hot cap releases scalding coolant. Running on with an overheat warning risks a head gasket or seized engine.
Call a technician if the checks above do not find the cause, if the code returns after clearing, or if the fix needs a service tool, a calibration or a software update.
Other SPN 110 codes
Source
Cummins ISX15 2013-2018 fault codes list (Diesel Laptops)
This list shows SPN 110 with FMI 2. The guidance on this page is general, not taken from it.
Checks, causes, the drawing and the meter test are general workshop guidance, not the maker's procedure. Codes can differ by serial number and software - confirm with the service manual or your dealer before replacing parts.
Machine down?
Get a replacement machine or a technician - suppliers in the UAE contact you.
