Bobcat E10e vs Cat 302 CR

The Cat 302 CR is the heavier machine, at 2.26 t against 1.2 t.

The Bobcat E10e is ahead on: turns tighter, narrower to transport, lower to transport. The Cat 302 CR is ahead on: digs deeper, reaches further, dumps higher, more digging or pushing force, more hydraulic flow, faster.

Below, every figure both makers publish sits side by side, with the Bobcat E10e and the Cat 302 CR drawn to the same scale from their dimension drawings.

Bobcat · mini excavator
Bobcat E10e
Change modelFull specs PDF
Cat · mini excavator
Cat 302 CR
Change modelFull specs PDF
Add a modelUp to four

At a glance

Bold is the machine ahead on each figure, with its lead.

Figure	Bobcat E10e	Cat 302 CR
Operating weight	1,201 kg	2,262 kg
Max digging depthHigher is better	1.82 m	2.37 m+30%
Max digging reachHigher is better	3.145 m	4.11 m+31%
Max dumping heightHigher is better	1.818 m	2.56 m+41%
Bucket digging forceHigher is better	8 kN	20 kN+136%
Pump flowHigher is better	25 L/min	66 L/min+164%
Travel speed (high)Higher is better	2.9 km/h	4.4 km/h+52%
Tail swing radiusLower is better	0.55 m+27%	0.75 m
Width of crawler (tracks expanded)Lower is better	1.1 m+21%	1.4 m
Overall height (to top of cab)Lower is better	2.209 m+4%	2.3 m
Overall length	2.793 m	3.9 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Differences only(97)

FigureBobcat E10e Cat 302 CR

Dimensions

Overall length2.793 mTransport position3.9 m

Track length1.28 mUndercarriage length1.85 mOverall undercarriage length

Track length on ground0.968 mSprocket to idler centresNot published

Swing centre to blade0.987 mMachine centre line to bladeNot published

Swing centre to front (transport)2.153 mNot published

Overall height (to top of cab)2.209 mTop of TOPS canopy2.3 mOverall shipping height

Engine cover height0.992 mNot published

Ground clearance, counterweight0.363 mGround to underside of the upperstructureNot published

Blade height0.22 m0.225 m

Tail swing radius0.55 mPlan view0.75 mTail swing

Width of crawler (tracks expanded)1.1 m1.4 m

Width of crawler0.71 mJ, undercarriage retracted1.09 m

Shoe width0.18 mRubber track0.25 mTrack belt/shoe width

Overall height (to top of boom)Not published1.07 m

Overall height (to top of boom), long stickNot published1.02 m

Swing bearing heightNot published0.442 m

Overall length, long stickNot published3.88 m

Ground clearance (minimum)Not published0.15 mMinimum ground clearance below undercarriage

Performance

Max digging reach3.145 mWorking area B4.11 mMaximum reach, standard stick

Max reach at ground level3.093 mWorking area C4.04 m

Max digging depth1.82 mWorking area K2.37 m

Max vertical wall digging depth1.383 mWorking area J1.85 mVertical wall, standard stick

Max digging height2.685 mWorking area H3.55 m

Max dumping height1.818 mWorking area I2.56 mMaximum dump clearance, standard stick

Min front swing radius1.374 mWorking area D, from the machine centre lineNot published

Max blade height0.196 mWorking area E, above ground0.285 mBlade raised, above ground

Max blade depth0.23 mWorking area F, below ground0.295 mBlade lowered, below ground

Bucket rotation196°Working area ANot published

Boom swing offset, left0.413 mPlan view MNot published

Boom swing offset, right0.471 mPlan view NNot published

Boom swing, left67°65°

Boom swing, right64°50°

Bucket digging force8 kN20 kN

Arm digging force6 kN11 kNStick digging force, standard stick

Swing speed10.2 rpmSlew rate9.8 rpmMachine swing speed

Max drawbar pull10 kNNot published

Travel speed (high)2.9 km/h4.4 km/h

Travel speed (low)1.8 km/h2.9 km/h

Max digging depth, long stickNot published2.57 m

Max vertical wall digging depth, long stickNot published1.94 m

Max reach at ground level, long stickNot published4.21 m

Max digging reach, long stickNot published4.27 m

Max digging height, long stickNot published3.62 m

Max dumping height, long stickNot published2.64 m

Boom-in reachNot published1.66 mBoom in reach, standard and long stick

Arm digging force, long stickNot published10 kNStick digging force, long stick

Weight

Operating weight1,201 kgWith bucket, ISO 60162,262 kg

Transport mass1,102 kgNo attachmentNot published

Ground pressure28.8 kPaRubber tracksNot published

Operating weight, cab (minimum)Not published2,057 kg

Operating weight, canopy (minimum)Not published1,918 kg

Operating weight, canopy (maximum)Not published2,081 kg

EU CE plate weight, canopyNot published2,045 kg

EU CE plate weight, cabNot published2,140 kg

Weight increase, long stickNot published8 kg

Weight increase, steel tracksNot published60 kg

Weight increase, expandable undercarriageNot published96 kg

Electric drive

Engine modelSchabmueller / Electric AM (TSA200) electric motor32 V (AC)Cat C1.1

Maximum power7.5 kW (10 hp)At 3,000 rpmNot published

Max torque30 NmAt 2,400 rpmNot published

BatteryLi-ion, 51.8 V (DC)Not published

Battery capacity11.52 kWh (2 x 5.76)Not published

Hydraulics

Pump flow25 L/minTotal hydraulic capacity, triple gear pump66 L/min

Max pressure190 barSystem pressure (auxiliary AUX1 relief)245 barOperating pressure, equipment

Auxiliary circuit flow, primary20 L/min33 L/minPressure 245 bar

Operating pressure, travelNot published245 bar

Operating pressure, swingNot published147 bar

Auxiliary circuit flow, secondaryNot published14 L/minPressure 245 bar

Service capacities

Hydraulic tank2.6 LHydraulic reservoir18 L

Hydraulic system, with tank9.4 LNot published

Fuel tankNot published26 L

Cooling systemNot published3.9 L

Engine oilNot published4.4 L

Hydraulic systemNot published26 L

Final drive (each)Not published0.6 LApproximate, 302 CR (S/N RHM00001-Up)

Service intervals

Hydraulic oil and filter500 hoursNot published

Final drive oil1,000 hours1,000 hours

Grease fittings, except frame10 hoursevery 10 hours or dailyNot published

Grease fittings, frame50 hoursNot published

Battery, inverter and motor cables (check)250 hoursor 12 months; check cables and connectionsNot published

Engine oil and filterNot published500 hours

Hydraulic oilNot published3,000 hours

CoolantNot published12,000 hours6,000 h minimum

Engine

EmissionsNot publishedU.S. EPA Tier 4 Final / EU Stage V

Net powerNot published15.7 kW (21 hp)ISO 9249, 80/1269/EEC, at 2,400 rpm

Gross powerNot published16.1 kW (21.6 hp)Engine power, SAE J1995:2014

BoreNot published77 mm

StrokeNot published81 mm

DisplacementNot published1.1 L

Travel

Max traction force, high speedNot published13 kN

Max traction force, low speedNot published20 kN

Ground pressure, minimum weightNot published23.7 kPa

Ground pressure, maximum weightNot published26.8 kPa

Gradeability (maximum)Not published30°

Blade

Blade widthNot published1.09 mExpanded: 1400 mm (55 in)

Boom and stick

Boom lengthNot published1.85 mOne-piece boom

Stick lengthNot published0.96 m

Stick length, long stickNot published1.16 m

Sources: Bobcat Electric Compact Excavator E10e, E19e brochure B4501263-EN (EU, English) · Cat 302 CR Mini Excavator Specalog AEHQ8146-09 (09-2025, build 05A, Global excluding China and Japan)

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

Bobcat E10eCat 302 CRSame scale, front edges and ground lined up.

Bobcat E10e vs Cat 302 CR: questions

Which is bigger, the Bobcat E10e or Cat 302 CR?

By operating weight the Cat 302 CR is the biggest at 2.26 t, then the Bobcat E10e at 1.2 t.

Which digs deeper, the Bobcat E10e or Cat 302 CR?

The Cat 302 CR: Bobcat E10e 1.82 m, Cat 302 CR 2.37 m (max digging depth), a 30% difference.

Which reaches further, the Bobcat E10e or Cat 302 CR?

The Cat 302 CR: Bobcat E10e 3.145 m, Cat 302 CR 4.11 m (max digging reach), a 31% difference.

Which turns tighter, the Bobcat E10e or Cat 302 CR?

The Bobcat E10e: Bobcat E10e 0.55 m, Cat 302 CR 0.75 m (tail swing radius), a 27% difference.

Which is narrower to transport, the Bobcat E10e or Cat 302 CR?

The Bobcat E10e: Bobcat E10e 1.1 m, Cat 302 CR 1.4 m (width of crawler (tracks expanded)), a 21% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.