EF Logo

Bobcat E10e vs Bobcat E20

The Bobcat E20 is the heavier machine, at 1.93 t against 1.2 t.

The Bobcat E10e is ahead on: turns tighter, lower to transport. The Bobcat E20 is ahead on: more torque, digs deeper, reaches further, dumps higher, more digging or pushing force, more hydraulic flow, faster.

Below, every figure both makers publish sits side by side, with the Bobcat E10e and the Bobcat E20 drawn to the same scale from their dimension drawings.

  1. Bobcat · mini excavator

    Bobcat E10e

    Full specsPDF

  2. Bobcat · mini excavator

    Bobcat E20

    Full specsPDF

  3. Add a model

At a glance

Bold is the machine ahead on each figure, with its lead.

FigureBobcat E10eBobcat E20
Operating weight1,201 kg1,930 kg
Max torqueHigher is better30 Nm42 Nm+41%
Max digging depthHigher is better1.82 m2.385 m+31%
Max digging reachHigher is better3.145 m4.134 m+31%
Max dumping heightHigher is better1.818 m2.566 m+41%
Bucket digging forceHigher is better8 kN21 kN+151%
Pump flowHigher is better25 L/min41 L/min+65%
Travel speed (high)Higher is better2.9 km/h4 km/h+38%
Tail swing radiusLower is better0.55 m+20%0.69 m
Overall height (to top of cab)Lower is better2.209 m+4%2.297 m
Overall length2.793 m3.688 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Dimensions

Overall length2.793 mTransport position3.688 mOverall length in travel position
Track length1.28 mUndercarriage length1.62 mOverall length of track assembly
Track length on ground0.968 mSprocket to idler centres1.258 m
Swing centre to blade0.987 mMachine centre line to blade1.045 m
Swing centre to front (transport)2.153 m2.882 m
Overall height (to top of cab)2.209 mTop of TOPS canopy2.297 m
Engine cover height0.992 m1.138 m
Ground clearance, counterweight0.363 mGround to underside of the upperstructure0.419 m
Blade height0.22 m0.235 m
Tail swing radius0.55 mPlan view0.69 m
Width of crawler (tracks expanded)1.1 mNot published
Width of crawler0.71 mJ, undercarriage retractedNot published
Shoe width0.18 mRubber track0.23 mRubber track
Track lug heightNot published0.025 m
Blade widthNot published0.98 m
Blade width, undercarriage extendedNot published1.36 m
Working width at max right-hand rotationNot published1.532 m
Working width at max left-hand rotationNot published1.37 m

Performance

Max digging reach3.145 mWorking area B4.134 m
Max reach at ground level3.093 mWorking area C4.089 m
Max digging depth1.82 mWorking area K2.385 mStandard dipperstick
Max vertical wall digging depth1.383 mWorking area J1.948 m
Max digging height2.685 mWorking area H3.573 m
Max dumping height1.818 mWorking area I2.566 m
Min front swing radius1.374 mWorking area D, from the machine centre line1.19 m
Max blade height0.196 mWorking area E, above ground0.22 mAbove ground
Max blade depth0.23 mWorking area F, below ground0.204 mBelow ground
Bucket rotation196°Working area A196°
Boom swing offset, left0.413 mPlan view M0.476 m
Boom swing offset, right0.471 mPlan view N0.638 m
Boom swing, left67°80°
Boom swing, right64°60°
Bucket digging force8 kN21 kN
Arm digging force6 kN10 kN
Swing speed10.2 rpmSlew rate8.4 rpmSlew rate
Max drawbar pull10 kN19 kN
Travel speed (high)2.9 km/h4 km/h
Travel speed (low)1.8 km/h2.5 km/h
Max digging depth, long dipperstickNot published2.565 m
Max height of working equipment, dipperstick retractedNot published2.564 m
Max working equipment radius, boom at max height, dipperstick retractedNot published1.592 m1,611 mm with long dipperstick (D*)

Weight

Operating weight1,201 kgWith bucket, ISO 60161,930 kg
Transport mass1,102 kgNo attachmentNot published
Ground pressure28.8 kPaRubber tracks31.10 kPaRubber tracks

Electric drive

Engine modelSchabmueller / Electric AM (TSA200) electric motor32 V (AC)Kubota D722-E2B-BCZ-7
Maximum power7.5 kW (10 hp)At 3,000 rpmNot published
Max torque30 NmAt 2,400 rpm42 NmNet, ISO 9249
BatteryLi-ion, 51.8 V (DC)Not published
Battery capacity11.52 kWh (2 x 5.76)Not published

Hydraulics

Pump flow25 L/minTotal hydraulic capacity, triple gear pump41 L/min
Max pressure190 barSystem pressure (auxiliary AUX1 relief)210 - 250 barBoom port relief, base and rod end
Auxiliary circuit flow, primary20 L/minNot published
Auxiliary circuit flowNot published30 L/min
Auxiliary circuit reliefNot published180 bar

Service capacities

Hydraulic tank2.6 LHydraulic reservoirNot published
Hydraulic system, with tank9.4 L19 L
Fuel tankNot published19 L
Cooling systemNot published3.3 L
Engine oil, with filterNot published3.3 L

Service intervals

Hydraulic oil and filter500 hoursNot published
Final drive oil1,000 hoursNot published
Grease fittings, except frame10 hoursevery 10 hours or dailyNot published
Grease fittings, frame50 hoursNot published
Battery, inverter and motor cables (check)250 hoursor 12 months; check cables and connectionsNot published

Engine

CylindersNot published3
DisplacementNot published0.7 L
Net powerNot published9.9 kW (13 hp)ISO 9249

Sources: Bobcat Electric Compact Excavator E10e, E19e brochure B4501263-EN (EU, English) · Bobcat E20 Excavator Spec Sheet, Bobcat EMEA, 2017-7-5 (AWRH 11001 - AWRH 99999), trade-site copy of the maker sheet

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

0 m1 m2 m3 m
Bobcat E10eBobcat E20Same scale, front edges and ground lined up.

Bobcat E10e vs Bobcat E20: questions

Which is bigger, the Bobcat E10e or Bobcat E20?

By operating weight the Bobcat E20 is the biggest at 1.93 t, then the Bobcat E10e at 1.2 t.

Which digs deeper, the Bobcat E10e or Bobcat E20?

The Bobcat E20: Bobcat E10e 1.82 m, Bobcat E20 2.385 m (max digging depth), a 31% difference.

Which reaches further, the Bobcat E10e or Bobcat E20?

The Bobcat E20: Bobcat E10e 3.145 m, Bobcat E20 4.134 m (max digging reach), a 31% difference.

Which turns tighter, the Bobcat E10e or Bobcat E20?

The Bobcat E10e: Bobcat E10e 0.55 m, Bobcat E20 0.69 m (tail swing radius), a 20% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.

More comparisons

EquipmentsFinder

Need equipment? Have equipment?

Buyers post one request and get quotes from suppliers. Suppliers list free and reach active demand.