Bobcat E10e vs Bobcat E26

The Bobcat E26 is the heavier machine, at 2.61 t against 1.2 t.

The Bobcat E10e is ahead on: turns tighter, lower to transport. The Bobcat E26 is ahead on: more torque, digs deeper, reaches further, dumps higher, more digging or pushing force, more hydraulic flow, faster.

Below, every figure both makers publish sits side by side, with the Bobcat E10e and the Bobcat E26 drawn to the same scale from their dimension drawings.

Bobcat · mini excavator
Bobcat E10e
Change modelFull specs PDF
Bobcat · mini excavator
Bobcat E26
Change modelFull specs PDF
Add a modelUp to four

At a glance

Bold is the machine ahead on each figure, with its lead.

Figure	Bobcat E10e	Bobcat E26
Operating weight	1,201 kg	2,608 kg
Max torqueHigher is better	30 Nm	66 Nm+121%
Max digging depthHigher is better	1.82 m	2.568 m+41%
Max digging reachHigher is better	3.145 m	4.542 m+44%
Max dumping heightHigher is better	1.818 m	2.845 m+56%
Bucket digging forceHigher is better	8 kN	24 kN+186%
Pump flowHigher is better	25 L/min	94 L/min+277%
Travel speed (high)Higher is better	2.9 km/h	4.3 km/h+48%
Tail swing radiusLower is better	0.55 m+33%	0.82 m
Overall height (to top of cab)Lower is better	2.209 m+9%	2.438 m
Overall length	2.793 m	4.174 m

All specifications

Every figure the makers publish. Search for one, or show only those that differ.

Differences only(75)

FigureBobcat E10e Bobcat E26

Dimensions

Overall length2.793 mTransport position4.174 mOverall length in travel position

Track length1.28 mUndercarriage length1.965 mOverall length of track assembly

Track length on ground0.968 mSprocket to idler centres1.543 m

Swing centre to blade0.987 mMachine centre line to blade1.462 mMachine centre line to blade

Swing centre to front (transport)2.153 m3.192 mMinimum radius in travel position

Overall height (to top of cab)2.209 mTop of TOPS canopy2.438 mHeight

Engine cover height0.992 m1.54 mGround line to top of engine cover

Ground clearance, counterweight0.363 mGround to underside of the upperstructure0.539 m

Blade height0.22 m0.319 m

Tail swing radius0.55 mPlan view0.82 mSwing clearance, rear (plan view)

Width of crawler (tracks expanded)1.1 mNot published

Width of crawler0.71 mJ, undercarriage retractedNot published

Shoe width0.18 mRubber track0.25 mRubber track width

Track lug heightNot published0.021 m

Blade widthNot published1.5 mStandard 1500 mm dozer blade

Tail swing radius, medium counterweightNot published0.84 mP* in the table

Performance

Max digging reach3.145 mWorking area B4.542 m

Max reach at ground level3.093 mWorking area C4.413 mWorking range C

Max digging depth1.82 mWorking area K2.568 mWorking range K

Max vertical wall digging depth1.383 mWorking area J1.474 mWorking range J

Max digging height2.685 mWorking area H4.006 mWorking range H, maximum bucket tooth height

Max dumping height1.818 mWorking area I2.845 mWorking range I

Min front swing radius1.374 mWorking area D, from the machine centre line1.755 mPlan view O, minimum turning radius

Max blade height0.196 mWorking area E, above ground0.385 mWorking range E, above ground

Max blade depth0.23 mWorking area F, below ground0.42 mWorking range F, below ground

Bucket rotation196°Working area A185°Working range A, bucket pivot angle

Boom swing offset, left0.413 mPlan view M0.58 m

Boom swing offset, right0.471 mPlan view N0.705 mPlan view N, right-hand rotation

Boom swing, left67°60°

Boom swing, right64°60°

Bucket digging force8 kN24 kN

Arm digging force6 kN16 kN

Swing speed10.2 rpmSlew rate9.3 rpmSlew rate

Max drawbar pull10 kN29 kN

Travel speed (high)2.9 km/h4.3 km/h

Travel speed (low)1.8 km/h2.5 km/h

Max height of working equipment, dipperstick retractedNot published3.104 mWorking range G

Max working equipment radius, boom at max height, dipperstick retractedNot published2.052 mWorking range D

Working width at max left-hand rotationNot published1.616 mPlan view R

Working width at max right-hand rotationNot published1.741 mPlan view Q

Weight

Operating weight1,201 kgWith bucket, ISO 60162,608 kgWith cab and bucket, ISO 6016

Transport mass1,102 kgNo attachment2,477 kgNo attachment

Ground pressure28.8 kPaRubber tracks30.3 kPaRubber tracks

Weight reduction with canopyNot published-118 kg

Electric drive

Engine modelSchabmueller / Electric AM (TSA200) electric motor32 V (AC)Yanmar 3TNV76-PBC

Maximum power7.5 kW (10 hp)At 3,000 rpmNot published

Max torque30 NmAt 2,400 rpm66 NmAt 1,800 rpm, SAE J1995

BatteryLi-ion, 51.8 V (DC)Not published

Battery capacity11.52 kWh (2 x 5.76)Not published

Hydraulics

Pump flow25 L/minTotal hydraulic capacity, triple gear pump94 L/min

Max pressure190 barSystem pressure (auxiliary AUX1 relief)Not published

Auxiliary circuit flow, primary20 L/min54 L/minRelief 180 bar

Auxiliary circuit flow, secondaryNot published20 L/minRelief 179 bar

Service capacities

Hydraulic tank2.6 LHydraulic reservoir10.2 LHydraulic reservoir

Hydraulic system, with tank9.4 L23 LSystem capacity

Fuel tankNot published34.4 L

Service intervals

Hydraulic oil and filter500 hoursNot published

Final drive oil1,000 hoursNot published

Grease fittings, except frame10 hoursevery 10 hours or dailyNot published

Grease fittings, frame50 hoursNot published

Battery, inverter and motor cables (check)250 hoursor 12 months; check cables and connectionsNot published

Engine oil and filterNot published250 hoursor 12 months; first change at 50 h

Fuel filtersNot published250 hours

Hydraulic oilNot published500 hours

Hydraulic filterNot published500 hoursand case drain filter; first change at 50 h

Final drive oil, first changeNot published50 hoursthen check the level every 250 h

Swing bearing greaseNot published50 hoursevery 10 h when working in water

Pivot points greaseNot published10 hours

Engine valve clearanceNot published1,000 hoursor 12 months

Engine

EmissionsNot publishedEU Stage V

CylindersNot published3

DisplacementNot published1.1 L

Gross powerNot published14.9 kW (20 hp)Maximum power at 2,400 rpm, ISO 14396

Engine oil, with filterNot published3.6 L

Cooling systemNot published4.3 LWith heater (3.9 L without)

Sources: Bobcat Electric Compact Excavator E10e, E19e brochure B4501263-EN (EU, English) · Bobcat E26, E27z, E27 brochure B4501724-EN (09-24, EU English) - specifications and lettered dimensions

Drawn to scale

Side views measured off each maker's dimension drawing, front edges and ground lined up.

Bobcat E10eBobcat E26Same scale, front edges and ground lined up.

Bobcat E10e vs Bobcat E26: questions

Which is bigger, the Bobcat E10e or Bobcat E26?

By operating weight the Bobcat E26 is the biggest at 2.61 t, then the Bobcat E10e at 1.2 t.

Which digs deeper, the Bobcat E10e or Bobcat E26?

The Bobcat E26: Bobcat E10e 1.82 m, Bobcat E26 2.568 m (max digging depth), a 41% difference.

Which reaches further, the Bobcat E10e or Bobcat E26?

The Bobcat E26: Bobcat E10e 3.145 m, Bobcat E26 4.542 m (max digging reach), a 44% difference.

Which turns tighter, the Bobcat E10e or Bobcat E26?

The Bobcat E10e: Bobcat E10e 0.55 m, Bobcat E26 0.82 m (tail swing radius), a 33% difference.

Where do these figures come from?

Each model's own published spec sheet or brochure, linked under the table. Builds differ by market and year, so confirm the figures for a particular machine with its dealer.

Can I rent or buy these machines in the UAE?

Each model's page lists the ones for hire and for sale on EquipmentsFinder now, with typical prices in AED.